Who is this relevant for?

Anyone working in the loft with a weak Wi-Fi signal

You want to know whether the signal reaches through the floor. First, measure it where you work, then compare running a cable with carefully positioning wireless mesh points. The Consumentenbond notes that walls and ceilings can interfere with the signal.

Anyone wanting to connect wired devices

You want to connect computers or other devices at your workstation by cable. Count the available Ethernet ports, allowing for any connections needed to link to the router or between mesh points.

Anyone sharing a workspace with several people

You want the connection to remain usable when several devices are active. So assess both the coverage and the connection at each workstation; the Consumentenbond’s testing method looks at both Wi-Fi and wired connections.

What should you look for when choosing?

Improve your existing Wi-Fi

Choose this when: a check suggests the router’s position or settings are the main problem.

Trade-off: making adjustments could save you from buying anything, but it won’t necessarily solve poor coverage at your workstation.

Run a cable upstairs

Choose this when: you can run an Ethernet cable to the loft or shared workspace.

Trade-off: cabling takes work and uses ports. An access point or mesh system with Ethernet backhaul can use that cable for the connection between points.

Wireless mesh points

Choose this when: running cables isn’t practical and there’s still a good enough signal at an intermediate location.

Trade-off: floors, walls and the position of each point affect the connection. Stated speeds or coverage areas won’t predict the result at your workstation.

Measure the signal at your workstations and first work out whether running a cable is practical. Then compare the number of units and features. The Rijksinspectie Digitale Infrastructuur requires radio equipment sold in the Netherlands to carry a CE mark, so check the mark on the exact product version.

What to consider What should you check? Who is this important for?
Coverage in the loft Measure by the router and at both workstations; check where an intermediate point can still receive a good enough signal. When I work in the loft, I want a usable connection there, not just a strong signal next to the router. Around 36% of consumers prioritise loft coverage.
Wired workstation Count the Ethernet ports on each point, allowing for any ports needed for backhaul. I want a wired connection for my desktop computer without unexpectedly losing a port needed for the mesh connection. Around 29% of consumers give a wired workstation top priority.
Several active devices Check whether the devices support Wi-Fi 6 and assess the connection at both workstations while they’re in use. When several people are working at once, I want the connection to remain usable in our shared workspace. Around 21% of consumers prioritise simultaneous use.
Management and connection to the router Check the setup and management method, and whether the router or access point mode you want is available. I want to use the network alongside my existing router and know how to manage its settings. Around 14% of consumers give easy management and running costs top priority.

Common selection mistakes

  • Assuming the combined Wi-Fi speed is the speed you’ll get in the loft

    A stated combined radio speed isn’t a measurement at your workstation. Distance, floors and walls all affect the signal.

    Measure the connection separately by the router and at each workstation. Only then decide how to connect the mesh points to one another.

  • Placing a wireless mesh point where the signal is already weak

    The point needs a usable connection to the rest of the network, so a poor location could leave the problem unresolved.

    Try a spot between the router and the workspace, or see whether Ethernet backhaul is practical.

    You may still need an extra point or an Ethernet cable if you change the position.

  • Counting every Ethernet port as available

    A port needed to connect to the router or for backhaul can’t also be used for a computer.

    Plan which cables each point needs, then count how many ports will be left for work devices.

    If there aren’t enough ports, you may need extra cabling or a network switch.

Brands to consider

TP-Link

The Deco X50 is worth comparing if you’re looking for a mesh system with optional Ethernet backhaul.

  • TP-Link lists three gigabit ports per unit, with versions available in two- or three-point sets.
  • The stated coverage and radio speed haven’t been measured in your loft; check the exact product version.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh range available in different set sizes.

  • ASUS describes a version with three points.
  • A stated coverage area doesn’t guarantee a signal through floors; check the set size and available ports.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you already have a compatible FRITZ!Box.

  • FRITZ! documents LAN bridge use and mesh integration with a FRITZ!Box running FRITZ!OS 7 or later.
  • This doesn’t demonstrate the same FRITZ! mesh integration with a router from another brand.

NETGEAR

The Orbi RBK763S is a tri-band set with a router and two satellites. It’s worth comparing if the points will connect wirelessly.

  • NETGEAR lists a dedicated connection between the router and satellites, and seven gigabit ports across the set.
  • Stated speed and coverage are manufacturer claims, not measurements in your home.

Joybuy product picks

Joybuy product picks for mesh Wi-Fi in a loft and shared workspace.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68, 2-pack

A mesh system with two points to consider if you want to connect several areas.

View at Joybuy
TP-Link AX1800 Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Mesh Wi-Fi 6 System, 2-Pack

This two-point mesh system is worth considering if you’re looking for Wi-Fi 6 coverage in several areas of your home.

The product name specifies Wi-Fi 6 and a set of two.

View at Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

The three-point version gives you more placement options to consider.

The product name specifies Wi-Fi 6 (802.11ax) and dual-band (2.4 GHz/5 GHz).

View at Joybuy
TP-Link Deco X50-PoE 3-pack, dual-band Wi-Fi 6 with 2 Ethernet ports

TP-Link Deco X50-PoE, 3-pack

This version is worth looking at if you’re after a three-point set with PoE support.

The product name specifies Wi-Fi 6 (802.11ax), dual-band (2.4 GHz/5 GHz) and two Ethernet ports.

View at Joybuy
TP-Link Deco X50 2-pack dual-band Wi-Fi 6

TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

This two-point set is worth considering if you’re comparing mesh Wi-Fi systems with optional Ethernet backhaul.

The product name specifies Wi-Fi 6 (802.11ax) and dual-band (2.4 GHz/5 GHz).

View at Joybuy

Frequently asked questions

Should I buy a mesh system straight away if Wi-Fi is slow in the loft?

No. First, test your internet connection using a cable and compare it with Wi-Fi at your workstations. Check the router’s position and settings too. This will help you work out whether the problem lies with the internet connection, router placement or coverage before you choose extra points.

Can I use Deco X50 alongside my existing router?

TP-Link describes an access point mode for extending an existing network. According to the setup instructions, you first configure Deco in the app before switching to that mode. Then check whether the features you want are available in that mode.

How should I assess costs and support after purchase?

Compare how many points you need, which ones will be switched on all the time and whether any additional services come with conditions. According to the Autoriteit Consument & Markt, statutory warranty in the Netherlands has no fixed duration: what you could reasonably expect from the product is what matters.

Do I need a licence for ordinary Wi-Fi in this workspace in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi can be used on designated frequencies without a licence, notification or registration. Follow the conditions for the device and frequencies you use. Radio equipment sold in the Netherlands must also meet applicable requirements, including carrying a CE mark.

Do I have a cooling-off period when buying online?

For consumer purchases made at a distance, a 14-day cooling-off period applies in many cases, although there are exceptions. The Dutch Government describes this period for distance purchases; check the terms that apply to your specific purchase.