Who is mesh Wi-Fi suitable for?

For anyone with a Wi-Fi dead spot

You want to follow the cookery class in the kitchen, but the wireless connection is weaker there than by the router. In that case, placement and coverage matter more than a high advertised top speed.

For anyone who can run a cable

You can run a network cable to a suitable mesh node and don’t want the connection between the nodes to rely on Wi-Fi. Check that the system supports Ethernet backhaul and that the cable reaches a useful location.

For anyone with a provider’s router

You want to keep your existing home network and mainly add extra Wi-Fi coverage. Check whether the mesh system works in access point mode and which features remain available in that mode.

What should you look for when choosing?

First, compare the Wi-Fi by the router with the signal where you’ll be cooking. Then decide whether you can connect the mesh nodes by cable and which features you want to keep from your existing router.

What to consider What should you look for? Who is this important for?
Coverage where you’re cooking Compare the connection by the router with the signal where you’ll be following the class; decide where an extra node could go. If I want to follow the class while cooking, Wi-Fi needs to work well there; around 36% of consumers give coverage where they’re cooking top priority.
Connection between mesh nodes Check that the exact model supports Ethernet backhaul and that there’s a suitable cable route. If I can run a cable, I want to connect the nodes by cable; around 29% of consumers give the connection between mesh nodes top priority.
Working with your router Check the exact model’s access point mode and which features remain available in it. If I want to keep using my provider’s router, I want to know which network features will remain; around 21% of consumers give compatibility with their existing router top priority.
Total cost and features Compare the number of nodes you need, any cables or power supplies, and features that require a subscription. If I only want to stream a cookery class, I don’t want to pay for extras I won’t use; around 14% of consumers give adequate coverage at a low total cost top priority.

Common buying mistakes

  • Going by the stated square-metre coverage alone

    A manufacturer’s coverage figure doesn’t tell you whether the mesh nodes will have a usable connection in the locations available in your loft.

    First, identify the weak spot and possible locations for the mesh nodes. Choose how many nodes you need based on your layout, not just a coverage figure.

    A pack with more nodes than your set-up needs could be unnecessarily large.

  • Choosing a PoE model without checking the power supply

    For the Deco X50-PoE V2, TP-Link lists support for 802.3at and 802.3bt, but not 802.3af. The available power supply must also be suitable for the model you choose.

    Check the PoE standard and the switch’s power budget for the exact version, or see whether the supported DC power supply suits your set-up.

    PoE power may require a suitable switch or changes to your cabling.

  • Assuming all router features remain available in access point mode

    According to TP-Link, some advanced features are unavailable with Deco in access point mode, including port forwarding and address reservation.

    Compare the features available in router and access point modes if you use more than just Wi-Fi coverage.

  • Assuming extra app features are included

    According to the product information, eero’s advanced online security tools and certain extra features may require a separate subscription.

    Check which features are available without a subscription for the exact system you’re considering.

    Some of the eero features mentioned require a separate subscription.

Brands to consider

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 mesh option with Ethernet backhaul. The X50-PoE adds PoE placement options; the suitable power supply depends on the version.

  • TP-Link lists three gigabit ports per node for the standard Deco X50.
  • For the Deco X50-PoE V2, TP-Link lists support for 802.3at and 802.3bt, not 802.3af. Check which version and ports you’ll get when buying.

ASUS

The ZenWiFi XD5 is a dual-band Wi-Fi 6 option to consider if you want to use Ethernet backhaul and choose how network names are set for each frequency band.

  • ASUS describes wired backhaul for the XD5 and the option to use one network name or separate names for each frequency band.
  • A stated combined wireless speed doesn’t tell you what speed you’ll get where you’re cooking. A listing for a three-pack of XD5s also doesn’t mean you need three nodes in every loft.

NETGEAR

The Orbi 770 series is a tri-band Wi-Fi 7 alternative to compare if you’re also planning for more wireless traffic alongside your cookery class.

  • NETGEAR lists tri-band connections and a wired backhaul option for this series.
  • The stated speed and coverage figures aren’t measurements taken in your loft. Weigh the extra features against what your set-up needs.

eero

The eero 6+ is a Wi-Fi 6 mesh option to compare if app-based set-up and expanding your system with compatible devices are important to you.

  • The eero 6+ is described as offering automatic updates and expansion with compatible eero devices.
  • Advanced online security tools and certain extra features may require a separate subscription. This doesn’t tell you how well streaming will work where you’re cooking.

Mesh Wi-Fi products at Joybuy

These Joybuy products are mesh Wi-Fi systems for extending coverage, with models that support wired or wireless backhaul and a PoE option. The right system for you depends on your cable route, where you want to place the nodes and which features you need.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68, 2-pack

A 2-pack to consider if you want to use two mesh nodes and have a cable route available.

Tri-band Wi-Fi 7; the product information lists wired and wireless backhaul and set-up via the Deco app.

Joybuy
ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8, 2-pack

An option to consider if you’re looking for two mesh nodes and a tri-band mesh system.

Tri-band Wi-Fi 7 with 2.4, 5 and 6 GHz bands; the product information lists AiMesh integration and set-up via the ASUS Router app.

Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4

A mesh option to consider if you want to use wired backhaul and manage set-up through an app.

Dual-band Wi-Fi 7; the product information lists a wired backhaul option and set-up via the ASUS Router app.

Joybuy
TP-Link Deco X50-PoE, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE, 2-pack

A mesh system to consider if you want to use two nodes powered by PoE.

Dual-band Wi-Fi 6; the product information lists PoE support and a DC input. Check which PoE standard is suitable for the exact version; TP-Link lists 802.3at and 802.3bt, but not 802.3af, for the X50-PoE V2.

Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 2-pack

An option to consider if you want to use two mesh nodes with Ethernet backhaul.

Dual-band Wi-Fi 6; TP-Link describes Ethernet backhaul for the Deco X50. The product information lists three gigabit ports per node and set-up via the Deco app.

Joybuy

Frequently asked questions

Will a mesh system help if the cookery class also buffers next to the router?

Check your internet connection and playback device first; extra Wi-Fi coverage won’t fix every streaming problem. Netflix recommends a stable connection of at least 5 Mbps for its own 1080p streams. This isn’t a set speed requirement for your cookery class service.

Can you use a mesh system alongside your provider’s router?

That depends on the operating modes available on the exact system. TP-Link describes an access point mode for Deco, in which the main router manages the network and Ethernet backhaul remains available; some advanced Deco features are then disabled.

What should you check when powering a Deco X50-PoE with PoE?

Check that the power supply is suitable for the exact version. TP-Link lists support for 802.3at and 802.3bt for the X50-PoE V2, but not 802.3af; if you’re using a PoE switch, also check its available power budget.

Can you choose your own router in the Netherlands?

According to ACM ConsuWijzer, you have the freedom to choose your router. The same safety and network requirements as for the provider’s equipment may apply if you connect your own device directly to the provider’s network; ask for the connection settings if needed. A mesh system connected behind your existing router is a different set-up.

Do your rights end when the manufacturer’s warranty expires?

No. ACM ConsuWijzer explains that statutory warranty in the Netherlands depends on what you could reasonably expect from the product, and exists alongside a retailer’s or manufacturer’s warranty. If a product is faulty, contact the retailer.