Who is this for?

Loft archive users

You want to access files in your converted loft and are looking for a place to position the mesh point where it can maintain a usable connection.

Managers of an existing network

You want to extend coverage to the loft without unnecessarily changing your current router or its connection to the archive.

Archive access managers

You want to decide which club members can access files and whether access from outside the club network is needed.

What should you consider?

First, decide how the connection between the router and the loft will work. Then choose the network mode and access settings that suit your archive.

Mesh with wired backhaul

Choose this when: You can run a network cable to the loft, for example if distance or a floor is interfering with the wireless connection.

The trade-off: You’ll need an available port and a cable installation, but the cable replaces the wireless connection between mesh points. TP-Link and ASUS describe Ethernet backhaul for their respective systems.

Fully wireless mesh

Choose this when: Running a cable isn’t possible and a mesh point in a suitable intermediate position can still receive a usable connection.

The trade-off: Setup is easier, but adding another point won’t automatically fix a weak signal. The Consumers’ Association notes that range can vary by model; advertised Wi-Fi speeds aren’t a measurement of performance in your loft.

What to consider What to look for Who does this matter to?
Loft coverage Decide where to position the main unit and the loft point. Check whether you can run a cable or use a suitable intermediate position. When I work in the loft, I want coverage there without placing a point that can barely connect itself. Around 36% of consumers prioritise usable loft coverage.
Router and archive location Map out where the archive is connected. Check the network mode, ports and cabling instructions for the exact system. I want to keep my existing network and archive connection when extending Wi-Fi. For around 29% of consumers, connecting to the router and archive is the top priority.
File access Check who can access the archive, how guest access is managed and whether access from outside the club network is needed. If guests also use the Wi-Fi, I want to decide who can see the club’s files. Secure archive access is the top priority for around 21% of consumers.
Points and management Work out how many points your layout requires. Also compare the number of usable ports and how updates are managed. I don’t want to manage more points than my layout requires. Cost, the number of points and management are the top priorities for around 14% of consumers.

Common pitfalls

  • Putting an extra wireless point where the signal is already weak

    The connection between mesh points also needs to cover the distance and floors. A point placed somewhere with poor coverage may have a weak connection itself.

    Work out where the router and loft point will go before deciding how many points to buy. Check whether a wired connection or a suitable intermediate position is possible.

  • Assuming the advertised Wi-Fi speed is the speed you’ll get at the archive

    Loft performance also depends on placement and the connection between points. A model’s advertised speed doesn’t tell you what performance will be like where you use the archive.

    Assess the connection at your intended workspace and check the cabling options for the system you choose.

  • Assuming better Wi-Fi will also manage archive access

    Wi-Fi coverage, shared file permissions and access from outside the club network are separate matters.

    Decide who can access the archive and whether external access is needed. If the club processes personal data, check which security measures apply.

Brands to consider

TP-Link

Deco X50 is a Wi-Fi 6 mesh range available in sets with one, two or three points. The specifications of the particular set determine whether it will connect to your existing network.

  • TP-Link documents Ethernet backhaul and access point mode for Deco.
  • TP-Link says some advanced Deco router features aren’t available in access point mode. Advertised speeds and range aren’t measurements taken in your club room.

ASUS

ZenWiFi XD5 is a mesh range for covering multiple rooms. AiMesh is worth considering if you want to explore wired connections and management within an existing ASUS network.

  • ASUS describes Ethernet backhaul for AiMesh; the Dutch product page lists Wi-Fi 6 for the XD5.
  • The coverage quoted by ASUS is a manufacturer’s estimate and doesn’t establish the range you’ll get in this loft.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend a compatible existing FRITZ! network.

  • FRITZ! says this model has two Gigabit LAN ports and can connect to a FRITZ!Box via LAN.
  • Check that your existing router is compatible with the mesh features you want.

NETGEAR

Orbi is worth comparing if you’re considering a mesh system with router and satellite points that can be connected by cable.

  • NETGEAR describes Ethernet ports for clients and backhaul on applicable Orbi systems.
  • Check the features of the exact Orbi set; general product information can’t predict performance in your loft.

Joybuy products

These mesh kits are options for extending Wi-Fi between an existing router and the loft. Check each model to make sure its backhaul, ports and network mode meet your needs. The Dutch Authority for Digital Infrastructure states that wireless equipment sold in the Netherlands must meet the applicable requirements and carry a CE mark. So, when considering a specific product, check its marking and exact EU version too.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

For anyone looking for a set with two Deco points and the option to use wired backhaul.

The product information lists tri-band Wi-Fi and wired and wireless backhaul.

View at Joybuy
TP-Link Deco E4 (3-pack)

TP-Link Deco E4 (3-pack)

For anyone looking to use three Deco points to connect multiple rooms with a mesh network.

The product information lists Wi-Fi 5 and two Ethernet ports per unit. According to the product information, wired connections support speeds of up to 100 Mbps.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack)

ASUS ZenWiFi BT8 (2-pack)

For anyone looking for a two-point mesh kit and wanting to factor an existing ASUS AiMesh network into their decision.

The product information lists tri-band Wi-Fi, AiMesh integration and a guest network. The title specifies Wi-Fi 7 and the 2.4 GHz, 5 GHz and 6 GHz bands.

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system (2-pack)

TP-Link AX1800 mesh Wi-Fi system (2-pack)

For anyone looking for a set with two mesh units and the option to use Ethernet backhaul.

The product information lists Wi-Fi 6, Ethernet backhaul and management via the Deco app.

View at Joybuy
TP-Link Deco M4 (3-pack)

TP-Link Deco M4 (3-pack)

For anyone looking to use three Deco stations to create a mesh network across multiple rooms.

The product information lists Wi-Fi 5, guest networks and network security.

View at Joybuy

Frequently asked questions

Does a mesh point need to be placed directly in the loft?

Not until you’ve checked the connection to that spot. With wireless backhaul, the point still needs to receive a usable signal itself. If it can’t, look into running a network cable to the loft.

Can the archive keep working behind the existing router?

That depends on your current connections and network configuration. TP-Link describes access point mode for Deco as a way to let your existing router manage the network. After installation, check that authorised devices can still access the archive.

Does mesh Wi-Fi automatically provide secure access to the archive from outside?

No. External access is a separate setting for the archive service and network. The methods described by Synology apply to its own NAS systems and won’t necessarily work with an unspecified club archive.

What costs and services should you compare alongside the kit?

Work out how many points you need and factor in power consumption and management. Also compare the available update and service terms. According to the Netherlands Authority for Consumers and Markets, the seller is responsible for the statutory guarantee on a consumer purchase.

Which Dutch rules apply to the equipment and club archive?

The Dutch Authority for Digital Infrastructure states that wireless equipment sold in the Netherlands must meet the applicable requirements and carry a CE mark. If the club processes personal data in the archive, the organisation must protect that data properly, according to the Dutch Data Protection Authority.