Start by deciding how your mesh points will connect: if you have an existing network cable, you can use Ethernet backhaul, while wireless mesh relies on positioning and the obstacles in the way. If a floor interferes with the wireless connection and there’s no cable, powerline backhaul may be an alternative, provided your equipment and electrical installation are suitable. Then work out how many points and connections you need; advertised speeds don’t automatically predict the connection you’ll get in the loft.
Who is this choice relevant to?
Someone who works from home and has a network cable to the loft
If you work downstairs and in the loft and can connect your mesh points by cable, look for Ethernet backhaul and check how many ports will be left for computers and other connections. TP-Link describes a wired connection as an option when thick floors or walls restrict the Wi-Fi signal.
Someone with a challenging floor and no cable
If you don’t have a network cable, you’ll need to assess whether your mesh points can reach each other reliably over Wi-Fi, or whether powerline backhaul is an option with your electrical installation. The choice depends on obstacles, positioning and compatible equipment.
Someone who wants to extend their network wirelessly
If you don’t want to run a cable, you’ll need a suitable spot where an extra Wi-Fi point can still get a strong enough connection to the rest of the network. The Consumentenbond recommends keeping obstacles between points to a minimum and, ideally, placing them no more than two rooms apart.
What should you look for when buying?
If you work downstairs and have a converted loft, start by considering how your mesh points will connect. Wired, wireless and powerline connections each have different installation and positioning requirements.
| What to consider |
What should you check? |
Who is this important for? |
| Wired connection |
Do you have a suitable network cable between the points? Check for Ethernet backhaul and how many Ethernet ports will remain available. |
I want to use a cable connection between my mesh points while working downstairs and in the loft. Around 36% of consumers put a wired connection at the top of their list of buying priorities. |
| Powerline through a challenging floor |
Check that both points support powerline backhaul and that your home’s electrical installation is suitable. |
If I can’t run a cable and the floor interferes with the wireless connection, I need another way to connect the points. Around 29% of consumers focus their choice on bridging a challenging floor without a network cable. |
| Wireless positioning |
See whether you can place a point somewhere with few obstacles where it can stay connected to the others; check the connection after installation. |
I want to reach both workspaces without running new cables and can place an intermediate point somewhere it can still get a signal. Around 21% of consumers give wireless expansion without running cables their highest priority. |
| Management and use |
Check which update and security features are available for the exact model and how many points will be switched on continuously. |
I want to take network management and the power consumption of devices that are always on into account. Around 14% of consumers put these practical considerations first. |
Common buying mistakes
-
Placing a wireless point in a dead zone
A mesh point still needs to connect to the other points. If you put it somewhere the signal has already dropped out, it won’t automatically solve the connection between the points.
First try a spot with fewer obstacles between downstairs and the loft, such as somewhere in between.
-
Assuming powerline mesh is always compatible
TP-Link states that Deco PX50 does not provide powerline backhaul with Deco PX10, P7 or P9. So you can’t assume that different models will share the same powerline connection.
Before expanding your system, check the model names and the powerline standard supported by every device involved.
-
Assuming the stated Wi-Fi speed is guaranteed in the loft
A model’s stated speed isn’t a measurement of the connection in your home. Obstacles, your chosen backhaul and the positioning all play a part.
Choose how the points will connect first, then test the connection in both workspaces.
-
Choosing a set based only on the number of devices
An extra point is only useful if it can connect to the rest of the mesh network. The Consumentenbond suggests starting with two points for coverage across two floors and three for three floors; this isn’t a guarantee for a particular home.
Start with the areas you want to reach and add a point only if its positioning and connection make it worthwhile.
Relevant brands to consider
TP-Link
According to TP-Link, the Deco X50 range offers optional Ethernet backhaul, while the Deco PX50 combines Wi-Fi with G.hn powerline backhaul.
- TP-Link lists three gigabit ports per PX50 point, along with powerline backhaul.
- The PX50 does not provide powerline backhaul with Deco PX10, P7 or P9. Stated speeds and coverage aren’t measurements taken in your home.
ASUS
The ZenWiFi BD4 is a Wi-Fi 7 mesh range to consider if you also want to assess 2.5-gigabit ports and AiMesh expansion.
- ASUS lists two 2.5-gigabit ports for the BD4.
- The available ports don’t prove that a wireless connection will pass through a floor more effectively. Check the configuration and power supply of the set you choose, too.
FRITZ!
FRITZ! describes the Mesh Set 1700 as a two-piece set that can connect to an existing router; the Repeater 3000 AX is a separate way to extend your network.
- FRITZ! lists automatic updates for the Mesh Set 1700.
- The two gigabit LAN connections listed by FRITZ! are on the Repeater 3000 AX; that specification doesn’t automatically apply to the Mesh Set 1700.
Joybuy products for mesh Wi-Fi
The products below are mesh systems for providing Wi-Fi in multiple areas. Check which backhaul options and connections are available for each model. The Rijksinspectie Digitale Infrastructuur states that radio equipment sold in the Netherlands must have the correct CE marking; check this for the exact version before you buy.
No image available
TP-Link Deco BE68 (2-pack)
A set of two mesh points for anyone considering wired or wireless backhaul.
The product description lists Wi-Fi 7, Ethernet backhaul, wireless backhaul and WAN/LAN ports. Setup using the Deco app is also mentioned.
Joybuy
No image available
ASUS ZenWiFi BT8 Tri-Band Wi-Fi 7 (2-pack)
A set of two mesh points for anyone considering a tri-band mesh setup.
The product name lists tri-band across 2.4, 5 and 6 GHz, plus Wi-Fi 7 (802.11be). The product description mentions AiMesh expansion and setup using the ASUS Router app.
Joybuy
No image available
TP-Link AX1800 Mesh Wi-Fi 6 (2-pack)
A set of two mesh points for anyone who wants to consider Ethernet backhaul.
The product description lists Wi-Fi 6, mesh use and a wired connection between Deco units.
Joybuy
No image available
TP-Link Deco M4 Wi-Fi 5 (3-pack)
A set of three mesh points for anyone who wants to connect several areas of their home.
The product description lists dual-band Wi-Fi 5 (2.4 and 5 GHz), two Ethernet ports per point and roaming between stations.
Joybuy
No image available
TP-Link Deco X50 Wi-Fi 6 (3-pack)
A set of three mesh points for anyone considering Ethernet backhaul as a way to connect them.
The product description lists Wi-Fi 6, optional Ethernet backhaul and three gigabit ports per point.
Joybuy
Frequently asked questions
Where should I put a wireless mesh point for the loft?
Don’t automatically put it where the Wi-Fi signal has already dropped out. Choose a spot with as few obstacles as possible between the points and check the connection. The Consumentenbond recommends placing them no more than two rooms apart, if possible.
Do I need three Wi-Fi points straight away?
Not necessarily. The Consumentenbond’s guide suggests two points for better Wi-Fi across two floors and three for three floors. After installation, check whether an extra point actually helps in your home.
Can I add a Deco PX50 to older powerline Deco units?
Not for shared powerline backhaul with Deco PX10, P7 or P9. According to TP-Link, the PX50 uses G.hn while those other models use HomePlug AV. Check separately which other mesh features are supported when combining models.
Who can help if a mesh system I’ve bought develops a fault?
If a product is faulty, the seller must provide an appropriate solution. The Rijksoverheid states that the Netherlands has no fixed statutory guarantee period; a manufacturer’s guarantee is in addition to your legal right to a product that works properly.
Do I need a licence for Wi-Fi at home, and what product rules apply?
The Rijksinspectie Digitale Infrastructuur states that Wi-Fi is exempt from licensing. Radio equipment sold in the Netherlands must meet the applicable European requirements and have the correct CE marking. Check this for the specific version and follow the instructions for use.