Who is mesh Wi-Fi for?

Student with a weak signal

You’re attending a lecture in a home office where distance, walls or the router’s location can make it harder for the Wi-Fi signal to reach you. So first, check the connection at your usual study spot.

Viewer in a busy household

Other people are using the network while you’re attending a live lecture, and running a cable to your home office isn’t straightforward. In that case, pay particular attention to the connection between the mesh units.

Buyer who wants to keep their ISP router

You want to improve your coverage without replacing your existing router. The operating mode determines which router manages the network and which features remain available.

What should you look for when choosing?

Mesh with Ethernet backhaul

Best if: you can run an Ethernet cable between the router and your home office.

Trade-off: you’ll need a cable and spare ports, but the connection between mesh units won’t depend on wireless backhaul.

Wireless mesh

Best if: running cables isn’t practical and an intermediate unit can get a good signal from the router.

Trade-off: placement and the wireless route are key. In its test of the Deco X50, Tweakers measured a drop in speed and response times on more distant wireless satellites.

Tri-band mesh with a dedicated router-to-satellite connection

Best if: several devices use wireless satellites and running cables isn’t an option.

Trade-off: Netgear describes the Orbi RBK763S as having a dedicated router-to-satellite connection. This is a model specification, not a guarantee of uninterrupted video in your home.

Existing router or a cable to your laptop

Best if: the Wi-Fi at your study spot is already good, or a direct cable to your laptop would solve the specific problem.

Trade-off: you won’t be adding mesh units, so this approach won’t improve coverage elsewhere.

What to consider What to look for Who is it important for?
Coverage where you attend lectures Compare the connection where you use your laptop with the one near the router. Then work out how many units you need and where to place them. I want a good enough signal at my usual lecture spot, even if that room is further from the router. Around 36% of consumers prioritise coverage where they work.
Wireless connection between units Check whether Ethernet backhaul is possible. If not, look for independent tests that include wirelessly connected satellites. I can’t connect the units by cable and want to know whether the wireless connection will hold up when other devices are active at the same time. Around 29% of consumers give this backhaul connection top priority.
Connection to your ISP router Check the operating mode and the wired connection for the first unit. Also check the CE marking on the product you receive; the Dutch Authority for Digital Infrastructure says it must appear on the equipment. I want to keep my current router and avoid changing essential network features. Around 21% of consumers choose mainly on the basis of how easily a system integrates with their ISP router.
What’s included and which features are available Compare the number of units included and check which security and parental control features are available in your chosen operating mode. I only want to choose the units and features I actually need, as long as I can follow my lecture in the home office without problems. Around 14% of consumers prioritise the set and features they need.

Common buying mistakes

  • Assuming the advertised Wi-Fi speed or coverage is what you’ll get in your home office

    TP-Link warns that actual throughput and coverage depend on factors such as your home, obstacles and the devices you use. Tweakers measured a drop in performance on more distant wireless Deco X50 satellites.

    Check the connection where you’ll be attending your lecture, and consider the route between the router and each wireless unit.

  • Placing an extra wireless unit somewhere it can barely get a signal

    Devices connected to a satellite still depend on that satellite’s backhaul connection.

    Place the unit somewhere it can still get a good connection to the router, or use an Ethernet cable if one is available.

  • Assuming all router features will be available in access point mode

    TP-Link says that, in this mode, some advanced security, parental control and router settings aren’t available in the Deco app.

    Decide in advance which router should manage your network, and check the features available in each operating mode for the system you choose.

Brands to compare

TP-Link

The Deco X50 may suit you if you’re looking for a Wi-Fi 6 mesh system that supports wireless or wired backhaul.

  • TP-Link lists three gigabit ports on each Deco X50 unit and support for Ethernet backhaul.
  • In its test of the X50, Tweakers measured a drop in performance on more distant wireless satellites. According to Tweakers, advanced security and parental control features may come at an extra cost.

ASUS

ZenWiFi may be a good fit if you want to configure network features; compare results for the exact set you’re considering.

  • Tweakers gave the setup options on the ZenWiFi XD4 Plus it tested a good rating.
  • Tweakers did not recommend this particular two-unit version because of its measured performance for 5GHz clients and backhaul. That verdict doesn’t automatically apply to other ZenWiFi models.

Netgear

The Orbi RBK763S is a tri-band model for a setup in which the router and satellites connect wirelessly.

  • Netgear describes the RBK763S as having a dedicated connection between the router and satellites. According to Netgear, the set includes one router and two satellites.
  • These model specifications aren’t an independent guarantee of performance in a home office or during a live lecture.

Joybuy products

These Joybuy picks are mesh systems designed to improve Wi-Fi coverage at home. Compare the size of each set and the features of the exact version with your workspace and network.

TP-Link Deco BE68 mesh system with two units

TP-Link Deco BE68 (2-pack)

This two-unit set is an option for extending Wi-Fi to several areas of your home.

Set: 2-pack.

View at Joybuy
TP-Link Deco E4 dual-band mesh system with three units

TP-Link Deco E4 (3-pack), dual-band, Wi-Fi 5

This three-unit set is designed to provide Wi-Fi in several areas of your home.

Set: 3-pack. Wi-Fi 5, dual-band (2,4 GHz/5 GHz).

Please note: the Ethernet ports described support speeds of up to 100 Mbps.

View at Joybuy
ASUS ZenWiFi BT8 mesh system with two units, tri-band and Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band, Wi-Fi 7

This two-unit set is an option if you want Wi-Fi in several areas of your home.

Set: 2-pack. Tri-band (2,4 GHz/5 GHz/6 GHz), Wi-Fi 7.

View at Joybuy
ASUS ZenWiFi BD4 dual-band mesh system, Wi-Fi 7

ASUS ZenWiFi BD4, dual-band, Wi-Fi 7

This mesh system may suit a setup where you want to use Ethernet backhaul.

Dual-band (2,4 GHz/5 GHz), Wi-Fi 7.

View at Joybuy
TP-Link Deco M4 dual-band mesh system with three units

TP-Link Deco M4 (3-pack), dual-band, Wi-Fi 5

This three-unit set is an option for extending Wi-Fi to several areas of your home.

Set: 3-pack. Dual-band (2,4 GHz/5 GHz), Wi-Fi 5.

View at Joybuy

Frequently asked questions

What speed do you need to attend a live lecture?

It depends on the lecture service and video quality. Zoom Support lists around 1,2–1,8 Mbps download for 720p and around 2–3 Mbps for 1080p for webinar attendees. These are requirements for the service, not a recommended mesh speed or a guarantee of your connection. Also check the signal where you’ll be watching.

Can you connect mesh to your existing ISP router?

With Deco, you can connect a main unit to an existing router using an Ethernet cable. In access point mode, that router manages the network, but TP-Link says some advanced Deco features are then unavailable in the app. Check the manual and operating modes for the system you choose.

What should you check after installation?

Check the connection where you’ll be attending your lecture, and move a wireless unit if its connection to the router is weak. The Dutch Consumers’ Association explains that Wi-Fi extenders are placed where you want to improve the signal; the connection between the units remains important.

Do you need a licence for home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for home network Wi-Fi if you use the designated frequencies and comply with the conditions of use. The authority also says there’s no notification or registration requirement for this licence-exempt use of frequencies. This doesn’t tell you whether a specific router meets product requirements.

What should you look for in features and energy use?

Check which features are available in your chosen operating mode and how many units the set includes. The Dutch Consumers’ Association takes energy use into account when assessing mesh systems; check these details for the exact version you’re considering.