Who should consider mesh Wi-Fi across multiple floors?

Watching from different floors

You watch lectures in different places and want to know whether each one has coverage. TP-Link notes that floors, building materials and placement can all affect coverage.

Network cable between floors

You may be able to connect your mesh nodes by cable and want to know which setup and connections are suitable. TP-Link describes Ethernet backhaul for Deco units.

Keeping your ISP router

You want to add mesh without accidentally changing the functions of your existing router, so you’re comparing router and access point modes. TP-Link describes both modes for Deco.

What should you look for in mesh Wi-Fi for live online lectures?

Mesh with Ethernet backhaul

Choose this if: there are usable network cables and connection points between the floors you want to cover.

Bear in mind: you’ll need suitable cables and ports; a wired connection alone doesn’t guarantee a good Wi-Fi signal where you’re watching.

Fully wireless mesh

Choose this if: there are no cables between floors and you can place the nodes where they can still communicate effectively with each other.

Bear in mind: floors, building materials and interference can affect the connection between nodes.

Extending an existing FRITZ! mesh

Choose this if: you already have a compatible FRITZ!Box and mainly need to extend your coverage.

Bear in mind: a standalone repeater isn’t a complete replacement for a router or mesh system.

What to consider What to look for when buying Who is this important for?
Coverage wherever you watch Mark the places where you watch and test the connection there; don’t rely on the stated coverage figure alone. I want to be able to follow the lecture wherever I sit; around 42% of consumers say coverage in every viewing spot is their main concern when buying.
Connection between mesh nodes Check for Ethernet backhaul and the ports you’ll need, or test the planned locations if you’re setting up a wireless system. I want to know whether nodes on different floors can reach each other; around 33% of consumers prioritise the connection between mesh nodes.
Existing router Check whether the exact system supports access point mode and which features will then remain available through your ISP router. I want to keep using my ISP router and know in advance which features will remain; around 17% of consumers say this is their main concern when buying.
Costs and ongoing support Check what’s included in the set, whether you’ll need cables or anything else, the subscription terms and the update information. I want to understand not just the set but also what managing it will involve later; around 8% of consumers say costs and ongoing support are their main concern when buying.

Common buying mistakes with mesh Wi-Fi

  • Assuming the stated square-metre coverage is guaranteed on every floor

    Floors, building materials and interference can all affect coverage in a building, so a stated coverage area won’t tell you how well the signal will reach your viewing spots.

    Test the connection where you watch the lecture and where you plan to place the mesh nodes.

    You may need to move a node or add cabling.

  • Placing a wireless node where the signal already drops out

    A mesh node needs a usable connection to the rest of the network before it can pass data on to your viewing device.

    Check the connection at the planned location and consider suitable cabling if it’s available.

  • Assuming access point mode is the same as router mode

    In Deco access point mode, the main router remains responsible for functions including DHCP. According to TP-Link, some advanced Deco features aren’t available in this mode.

    Decide in advance which router and management features you want to keep, and check the documentation for the exact system.

Brands to compare

TP-Link

Deco sets are worth comparing if you’re putting together a mesh system. The Deco X50 and Deco X50-PoE are different models.

  • TP-Link documents Ethernet backhaul and access point mode for Deco. For the Deco X50, TP-Link lists three gigabit ports.
  • According to TP-Link, some advanced Deco features aren’t available in access point mode. The X50-PoE range uses PoE power and has different connections from the X50.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 set worth comparing if you’re also considering a wired AiMesh or ZenWiFi setup.

  • ASUS documents settings for Ethernet backhaul and connecting through a switch.
  • ASUS warnings about 160 MHz on 5 GHz don’t apply in every country; check which options are available for your use.

FRITZ!

The FRITZ!Repeater 3000 AX is most relevant for extending a compatible existing FRITZ!Box setup.

  • FRITZ! explains how to connect to a FRITZ!Box via LAN and transfer mesh settings.
  • A standalone repeater isn’t a complete mesh system and won’t automatically replace your router.

NETGEAR

The Orbi 770 is a tri-band Wi-Fi 7 range worth comparing if other devices being used at the same time or multi-gig connections are also a consideration.

  • For the two-unit Orbi 770 set, NETGEAR lists a 2.5-gigabit internet port and improved wireless backhaul.
  • These are manufacturer specifications and claims; they don’t show that you need Wi-Fi 7 to follow a single live online lecture.

Mesh Wi-Fi product options at Joybuy

These product options are suited to mesh Wi-Fi across multiple floors. Check how the nodes connect to each other and what router setup you’ll need for each model.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

Worth comparing if you’re looking for a mesh setup with two units to cover several viewing spots.

Pack: 2-pack.

Joybuy
TP-Link Deco PX10 dual-band Wi-Fi 6

TP-Link Deco PX10 dual-band Wi-Fi 6

An option worth comparing if you want to consider using Powerline over your existing electrical wiring to connect different areas.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).

Joybuy
TP-Link Deco M4 3-Pack

TP-Link Deco M4 3-Pack

Worth comparing if you want to look at a mesh set with three units for viewing spots spread across your home.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 5 (802.11ac).

Joybuy
TP-Link Deco X50 3-Pack

TP-Link Deco X50 3-Pack

Worth comparing if you’re looking at a mesh set with three units and considering a wired connection between compatible Deco nodes.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

An option worth comparing if you’re looking for a mesh router to use in several areas.

Dual-band. Wi-Fi 7.

Joybuy

Frequently asked questions about mesh Wi-Fi for live online lectures

Do I need to put a mesh node on every floor?

Not necessarily. First, work out where you’ll actually be watching and test the connection there, as well as at the planned node locations. Floors and building materials can affect coverage.

When is Ethernet backhaul an option?

Ethernet backhaul is an option if you have suitable network cables and connections between the mesh nodes. Check the connection order for the router or access point mode of the exact system.

Can I keep my ISP router?

For Deco, TP-Link describes an access point mode in which the existing main router continues to handle functions including DHCP. Some advanced Deco features aren’t available in this mode; check the instructions for the system you choose.

What should I check after installation?

Check that the mesh nodes are connected as intended and keep the software up to date. TP-Link explains how to check in the Deco app whether a satellite is using Ethernet backhaul; the Dutch Data Protection Authority recommends updating smart devices.

Which marking should I check for wireless equipment in the Netherlands?

Check that the device carries the required CE marking. According to the Dutch Authority for Digital Infrastructure, stricter European requirements have applied to wireless devices placed on the market since 1 August 2025. A product listing doesn’t confirm that the item delivered has the correct marking.