Which setup is right for you?

Household with cabling between rooms

You want to use the media server from the kitchen and can connect a mesh point via Ethernet. Consider the cable route and how many network ports will remain available once connected. TP-Link describes Ethernet backhaul for Deco systems.

Household without a network cable

You want to improve Wi-Fi in the kitchen without running a cable. The position of the extra point and its wireless connection to the main point are important considerations. The Consumers' Association notes that the position and installation of a Wi-Fi extender matter.

Owner of an existing mesh system

You want to know whether a compatible extra point will do the job, rather than replacing the entire network. eero describes how to extend an existing eero network; FRITZ! describes the FRITZ!Repeater 3000 AX as a mesh extender.

What should you look for in mesh Wi-Fi?

Mesh with Ethernet backhaul

Choose this if: there’s a usable network cable between the locations for your mesh points.

Keep in mind: you’ll need to run a cable and use the right connection setup for router or access point mode.

Fully wireless mesh

Choose this if: running cables isn’t practical and you can place an extra point somewhere with a good connection to the main point.

Keep in mind: the connection will still depend on wireless conditions in your home, so test it in the kitchen.

Extend your existing mesh network

Choose this if: you already have a mesh system and an extra point is compatible with it.

Keep in mind: an extender won’t automatically replace a complete kit; check the ports on the specific version too.

Consideration What to look for Who it matters to
Connection between rooms Check whether Ethernet backhaul is possible and how many ports will remain available once everything is connected. Test playback in the kitchen. If my main priority is making sure the media server and kitchen can connect over the network, I’ll focus on the connection between the points. Around 36% of consumers say this is their top priority.
Coverage without a cable Check whether the kit can connect wirelessly and where you can place an extra point; test the connection there. If I can’t run a cable, I want to find a spot where the extra point can reach both the main point and the kitchen. Around 29% of consumers say coverage without a cable is their top priority.
Access to the media server Check the router or access point mode and the guest network settings. Test whether the server is accessible from the device in the kitchen. I want to be sure the device in the kitchen can see the server on the local network, rather than just connect to Wi-Fi. For around 21% of consumers, access to a local server comes first.
Existing equipment and ports Make a note of the brand and model of your current system; check compatibility, what’s included in the kit and the ports on the version you’re considering. If I want to keep my current network, I need to know whether a compatible extra point will do the job. Around 14% of consumers say keeping their existing equipment is their top priority.

Common buying mistakes

  • Assuming the combined Wi-Fi speed is the speed between the server and the kitchen

    A quoted combined Wi-Fi speed doesn’t measure the connection through the walls and layout of your home.

    First choose how you want to connect, then test the connection where you plan to stream.

  • Choosing a Wi-Fi-only extender when you want to connect a device or mesh point by cable

    According to eero, the eero 6+ Extender has no Ethernet ports. The eero 6+ router has two, so it matters which version you choose.

    Check the full product name, what’s included in the kit and the connections on each unit.

    Depending on your setup, you may still need a different mesh unit or additional network equipment.

  • Assuming Wi-Fi coverage automatically gives you access to the media server

    A guest network may restrict access to devices and services on your private network. ASUS explains that this can also affect local services.

    Test access to the server from the device in the kitchen and check your guest network and local network settings.

Brands to compare

TP-Link

The Deco X50 is a mesh option worth considering if you need Ethernet backhaul and several wired connections.

  • According to TP-Link, the Deco X50 has three gigabit ports per unit and supports optional Ethernet backhaul.
  • The connection setup described varies between router and access point modes. The advertised coverage isn’t a measurement taken in your home.

ASUS

The ZenWiFi XD4 Plus is an option with Ethernet backhaul, as described by ASUS.

  • ASUS says wired backhaul leaves the Wi-Fi bands free for wireless devices.
  • Guest network settings may restrict access to services on your private network. Check the features of the exact model.

eero

The eero 6+ is worth considering as a complete mesh network or to extend an existing compatible eero network.

  • According to eero, the eero 6+ router has two gigabit ports.
  • The standalone eero 6+ Extender has no Ethernet ports and requires an existing eero network. Don’t confuse the versions if you need wired connections.

FRITZ!

The FRITZ!Repeater 3000 AX is an extender worth looking into if your existing main router is suitable for a FRITZ! mesh setup.

  • FRITZ! lists mesh extension and two gigabit LAN ports as features of this model.
  • A standalone repeater isn’t automatically a complete kit for a new mesh network; check that your main router is compatible.

Mesh Wi-Fi products at Joybuy

This selection includes mesh kits for a network with wired backhaul and a wireless mesh option. Compare the ports, kit size and version before connecting your media server or mesh points.

TP-Link Deco BE68 mesh kit, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh kit that supports wired and wireless backhaul, ideal if you want to connect mesh points using a cable.

Three WAN/LAN ports per unit, including 10 Gbps, 2,5 Gbps and 1 Gbps.

Joybuy
TP-Link Deco E4 mesh kit, 3-pack

TP-Link Deco E4 (3-pack)

A set of three mesh units for anyone looking to create wireless mesh coverage between rooms.

Dual-band Wi-Fi 5 (802.11ac). The two network ports on each unit have a maximum speed of 100 Mbps.

Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

A mesh option to compare if you’re looking for wired backhaul and a dual-band Wi-Fi 7 network.

Two 2,5 Gbps Ethernet ports per unit.

Joybuy
TP-Link Deco X20 AX1800 mesh kit, 2-pack

TP-Link Deco X20 AX1800 (2-pack)

A Deco X20 mesh kit with Ethernet backhaul support, for anyone looking to connect mesh points using a network cable.

Wi-Fi 6; the kit includes two mesh units.

Joybuy
TP-Link Deco X50 mesh kit, 3-pack

TP-Link Deco X50 (3-pack)

A mesh kit to consider if you want to place several points and use Ethernet backhaul; TP-Link describes this as an option for the Deco X50.

Three gigabit ports per unit.

Joybuy

Frequently asked questions

Why can’t the device in the kitchen find the media server when Wi-Fi is working?

First check whether the device is connected to a guest network and whether that network allows access to your private network. ASUS documents that this kind of setting can prevent access to local services, including a NAS. Check how your own router model works and review its settings.

How do I connect Deco points using a network cable?

The right connection depends on the mode of your Deco system. For router mode, TP-Link describes connecting via the LAN side of the main Deco. For access point mode, it also describes a connection via your existing main modem or router. Follow the instructions for your setup, then check in the app that Ethernet backhaul is active.

Can an eero 6+ Extender also connect a wired device?

No. According to eero, the eero 6+ Extender has no Ethernet ports, while the eero 6+ router has two. Check which version is in the box before relying on a wired connection.

How long is the warranty on a mesh system in the Netherlands?

There’s no set period that defines the length of the statutory warranty in the Netherlands for every product: you’re entitled to a product that, with normal use, meets the standard you could reasonably expect. According to ACM ConsuWijzer, the seller is responsible for providing an appropriate free solution if the product proves faulty too soon; a manufacturer’s warranty doesn’t replace this statutory right.

Do I need a permit or registration to use standard home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi use generally doesn’t require a permit as long as you comply with the conditions of use; there’s no notification or registration requirement for this permit-free use of frequencies. Also check that equipment intended for the Dutch market has the correct CE marking.