Start by testing your internet connection over a wired connection, then check coverage where you teach: mesh Wi-Fi won't fix a slow broadband connection. If Wi-Fi coverage is weak beyond the hallway, place an extra point where it can still get a good connection, or make use of a suitable existing Ethernet route. Also check guest access, the connections you need and the exact version of the product. The Consumers' Association recommends testing the connection where you plan to use it, while the RDI explains the applicable requirements for radio equipment.
Who might need mesh Wi-Fi in this situation?
Teacher with poor coverage in the teaching space
Wants to find out whether the teaching space is a Wi-Fi dead zone and whether an extra point could get a usable connection there. The Consumers' Association recommends considering obstacles and placement when positioning Wi-Fi points.
Teacher with several connected teaching devices
For example, uses a teaching laptop and participants' devices at the same time, and wants a reliable connection during lessons and suitable access for guests.
Resident with limited space or a tricky cable route
Has little room in the hallway and wants to know whether a mesh point can go elsewhere or an existing Ethernet route could be used.
What should you look for in mesh Wi-Fi for a teaching space?
First check your internet connection and where your existing router is positioned. Then decide whether you can reach the teaching space with an extra wireless point or via an existing Ethernet route.
The Consumers' Association recommends positioning Wi-Fi points to minimise obstacles. Whether a location is suitable depends on the connection between the points.
| What to consider |
What should you check? |
Who is this important for? |
| Coverage where you teach |
Measure the signal next to the router and in the teaching space; test a possible location for the extra point. |
If I teach somewhere beyond walls or further into the house, I want to know whether the signal reaches that spot. Around 28% of consumers prioritise coverage where they teach. |
| Using several devices during lessons |
Test your wired internet connection and check that your teaching devices support the system's Wi-Fi standard. |
If several participants and my teaching device are online at the same time, I want a connection that suits the way I teach. Around 22% of consumers give highest priority to using several devices during lessons. |
| Positioning in the hallway |
Check that there is a suitable spot and a power socket; see whether existing Ethernet cabling would let you position a point away from the walkway. |
With limited space in the hallway, I want to position a point without blocking the way through. Around 22% of consumers focus primarily on a suitable position or cable route. |
| Access for participants |
Check whether the system has a guest network and how to set it up on the version you are considering. |
If participants bring their own devices, I want to be able to manage their access separately. Around 17% of consumers prioritise separate guest access. |
| A suitable kit and features |
Choose the number of points to suit the locations you have tested, and check which management features are included with the version you are considering. |
If moving the router or using fewer points would solve my problem, I don't want to choose a larger kit than my situation calls for. Around 11% of consumers prioritise a suitable kit size and features. |
Common buying mistakes
-
Confusing a claimed Wi-Fi speed with the speed in your teaching space
Your actual connection depends on factors including your internet connection, devices and obstacles. A product specification doesn't tell you what you'll get in your home.
First test your internet connection using a computer connected with a network cable, then check Wi-Fi coverage where you teach.
-
Putting an extra point where the signal is already weak
A wirelessly connected mesh point also needs a usable connection to the network. So the narrow hallway isn't automatically the right place for it.
Test a spot before the weak zone, or see whether existing Ethernet cabling could provide an alternative. Keep the walkway clear.
-
Assuming every feature is included as standard
TP-Link's manual distinguishes between the free HomeShield Basic plan and the Pro plan.
Check which plan includes the management feature you want to use for the exact version you're considering.
Relevant brands to consider
TP-Link
The Deco X50 range includes mesh kits in different sizes. Placement and an existing cable route may influence your choice.
- TP-Link lists three gigabit ports per Deco X50 point and optional Ethernet backhaul.
- Claimed speed and coverage figures aren't measurements taken in your home. Features may vary by hardware and software version.
ASUS
The ZenWiFi XD5 is worth considering if you're looking at a mesh setup with several points and want to make use of Ethernet cabling.
- ASUS describes Ethernet backhaul for the XD5 when wall sockets are available.
- The stated Wi-Fi speeds and coverage don't show what results the XD5 will deliver in your hallway or teaching space.
Google
Nest Wifi Pro is a Wi-Fi 6E system to consider if app-based management and guest access matter to you.
- Google lists device prioritisation and a guest network for Nest Wifi Pro.
- According to Google, Nest Wifi Pro doesn't work with earlier generations of Nest Wifi or Google Wifi. Claimed coverage doesn't guarantee a signal through obstacles in your home.
Joybuy products for mesh Wi-Fi at home
These mesh kits are designed to provide Wi-Fi in several areas of the home; some listings mention Ethernet backhaul. For radio equipment sold in the Dutch market, check the applicable requirements and the CE marking on the specific version. The RDI explains that the manufacturer applies the CE marking when the equipment meets the requirements.
Image unavailable
TP-Link Deco BE68 2-pack
A two-point kit for several areas of the home; the description mentions wired and wireless backhaul.
Wi-Fi 7, tri-band and MLO. 10, 2.5 and 1 Gbps Ethernet ports are listed.
View at Joybuy
Image unavailable
ASUS ZenWiFi BT8 2-pack
A two-point mesh kit for connecting several areas and including guest access in your decision.
Tri-band Wi-Fi 7 on 2.4, 5 and 6 GHz; the product description mentions a guest network and management via the ASUS Router app.
View at Joybuy
Image unavailable
TP-Link Deco X50-PoE 2-pack
A two-point kit for several areas; PoE may be useful if your existing Ethernet installation supports it.
Dual-band Wi-Fi 6 on 2.4 and 5 GHz. The description mentions PoE support, two Ethernet ports per point and guest access.
View at Joybuy
Image unavailable
TP-Link Deco XE75 3-pack
The three-unit kit may suit you if you want to test Wi-Fi in several areas; suitable placement is still key.
Tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz. The product description mentions guest access.
View at Joybuy
Image unavailable
TP-Link Deco X50 2-pack
A two-point kit for connecting several rooms and making use of a suitable Ethernet route, if one is available.
Wi-Fi 6, dual-band on 2.4 and 5 GHz, and optional Ethernet backhaul. The description mentions OFDMA and MU-MIMO.
View at Joybuy
Frequently asked questions
Will mesh Wi-Fi help if my internet connection itself is slow?
No, mesh Wi-Fi won't fix a problem with your internet connection itself. First test it using a computer connected with a network cable. If the speed is still below the speed promised for your connection, discuss it with your provider.
Does a mesh point have to go in the middle of the narrow hallway?
No, that's not automatically the right spot. Test a location with as few obstacles as possible where the point still gets a good connection to the other point. If you have a suitable Ethernet route, you can use a wired connection; follow the connection instructions for the system you've chosen.
Can I use my own router, and do I need a licence for home Wi-Fi?
According to ACM ConsuWijzer, you can generally choose your own router, provided it meets the applicable requirements. Ask your provider for connection details if needed. The RDI says you don't need a licence for home Wi-Fi when you use the designated frequencies and comply with the conditions of use.
What rules apply to the device, and what if it breaks quickly?
Radio equipment placed on the market in the Netherlands must meet the applicable product requirements. The manufacturer applies a CE marking when the device meets those requirements, according to the RDI. If a product develops a fault during normal use, ACM ConsuWijzer says the seller is responsible for the statutory guarantee.