Mesh Wi-Fi is most useful when your Wi-Fi signal is weak in several areas of your home. If the problem is limited to one hard-to-reach home office, a better router position or a single extra Wi-Fi point may be enough. First, test your connection using an Ethernet cable, then compare it with Wi-Fi in your home office: mesh can’t fix a problem with your provider’s internet connection.
Who is this guide for?
Cookery-class viewer with patchy Wi-Fi in the home office
You want to follow a cookery class without interruptions and first work out whether the problem is your internet connection or the Wi-Fi signal at your desk. The Consumentenbond recommends running a speed test using an Ethernet cable; YouTube Help provides speed recommendations for different picture quality settings on its own service.
Homeowner with rooms behind walls or floors
You use Wi-Fi in several hard-to-reach areas and want to choose the number of points and how they connect to one another to suit your home. The Consumentenbond highlights the importance of keeping obstacles between Wi-Fi points to a minimum when positioning them.
Family with several people online at once
You want to follow a cookery class while others use their devices. The Consumentenbond notes that older devices can connect to Wi-Fi 6, but won’t benefit from the improvements offered by that Wi-Fi version.
What should you look for in mesh Wi-Fi?
First, test the connection where you watch your cookery class. Then decide whether to improve your existing network, add one Wi-Fi point or install several mesh points.
Existing router or one extra point
Choose this if: the Wi-Fi signal is poor mainly in your home office and works well in other rooms.
Bear in mind: an extra point will only help if it can still get a usable connection to the network.
Wireless mesh points
Choose this if: several rooms have a poor signal and running an Ethernet cable between the points isn’t practical.
Bear in mind: walls, ceilings and distance can affect the connection between the points.
Mesh with Ethernet backhaul
Choose this if: there’s a usable Ethernet cable at or near the location of a Wi-Fi point.
Bear in mind: cabling and available ports will determine whether this setup is practical. Also check whether the devices can work behind your existing router.
| What to consider |
What to look for when buying |
Who is this important for? |
| Reliable connection for your class |
Compare a wired test with Wi-Fi where you watch; check the coverage in that spot. |
I want to follow the cookery class at my desk without interruptions and find out whether Wi-Fi or my internet connection is the cause. Around 36% of consumers prioritise a stable picture where they watch. |
| Coverage and connection between points |
Choose the number of points to suit your rooms and floors; check whether Ethernet backhaul is possible and where a point can still get a good signal. |
If some rooms or floors have a poor signal, I want to know where I can place the points and whether I can connect them with cables. Around 29% of consumers give coverage and the connection between points top priority. |
| Using the internet at the same time |
Check which Wi-Fi versions your devices support, and consider bands and backhaul alongside your setup. |
When other people at home are online at the same time, I want to follow the class without relying solely on a Wi-Fi version or advertised maximum speed. Around 21% of consumers prioritise simultaneous use. |
| Existing equipment |
Check compatibility with your router, the available operating mode and how many points you actually need. |
I want to keep my current router if possible and extend coverage only where necessary. Around 14% of consumers make keeping their equipment and the extent of the upgrade their main priority. |
What to watch out for when buying
-
Buying a faster mesh system without testing first
A wired test can help you tell the difference between an internet connection problem and a Wi-Fi problem in your home.
First, test using an Ethernet cable, then test Wi-Fi where you watch the class.
-
Placing a wireless point in a dead zone
The extra Wi-Fi point also needs a connection to your existing network. If you put it somewhere the signal has already dropped out, that connection may be too weak.
Try placing it between the router and your desk, with as few obstacles as possible. Consider Ethernet backhaul if you can run a cable.
-
Assuming the maximum speed or Wi-Fi version is the speed you’ll get at home
An advertised maximum speed or coverage range won’t tell you how well the connection will work in your home office. The Wi-Fi version alone doesn’t determine performance in that spot either.
Consider your home’s layout, obstacles, the ports you need and the connection between the points, then test where you watch.
-
Replacing your provider’s router when you mainly need better coverage
A mesh system can sometimes work behind your existing router in access point mode. TP-Link says that not all Deco app features are available in this mode.
Before buying, check the operating mode and whether the features you use will still be available.
Brands to compare
TP-Link
The Deco X50 range is worth considering if you’re looking for an expandable Wi-Fi 6 mesh system for several rooms. TP-Link lists sets with two or three points and optional Ethernet backhaul.
- TP-Link says each Deco X50 unit has three gigabit ports and can be set up using an app.
- The stated wireless speeds and coverage are the manufacturer’s claims, not measurements from your home office. Choose a set size to suit your home.
ASUS
The ZenWiFi XD5 is a Wi-Fi 6 mesh option to compare if you’re looking into Ethernet backhaul and customisable network names.
- ASUS describes Ethernet backhaul for the XD5.
- The technical specifications for the W-3-PK variant come from ASUS USA. Check that the model and support match the version you’re planning to buy.
FRITZ!
The FRITZ!Repeater 1200 AX is worth considering as an addition to a compatible FRITZ!Box, rather than as a standalone multi-point system.
- FRITZ! says the repeater can connect via LAN and be added to a FRITZ! mesh with a FRITZ!Box running FRITZ!OS 7 or later.
- Don’t assume you’ll get the same mesh integration with a router from another brand.
Joybuy products for mesh Wi-Fi at home
This product selection focuses on multi-point mesh systems for Wi-Fi coverage in several rooms. The options described offer wireless and/or wired connections between points.
No image available
TP-Link Deco BE68 (2-pack)
A two-point mesh set to consider if you want to extend Wi-Fi to several rooms.
The description lists Wi-Fi 7, tri-band and wired or wireless backhaul.
Each unit is listed with 10, 2.5 and 1 Gbps ports.
View at Joybuy
No image available
ASUS ZenWiFi BT8 (2-pack)
This two-point mesh set is worth comparing if you need coverage in several areas.
The product description lists Wi-Fi 7, tri-band and 2.4, 5 and 6 GHz bands.
AiMesh integration is listed for compatible ASUS routers.
View at Joybuy
No image available
ASUS ZenWiFi BD4
This mesh option is worth comparing if you want to extend Wi-Fi coverage across several points.
The description lists Wi-Fi 7, dual-band on 2.4 and 5 GHz, and an option for wired backhaul.
Setup and network management using the ASUS Router app are also listed.
View at Joybuy
No image available
TP-Link AX1800 Wi-Fi 6 mesh system (2-pack)
This set of two Deco X20 units is an option for extending coverage to several rooms.
The description lists Wi-Fi 6 and Ethernet backhaul.
OFDMA and MU-MIMO are also listed.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack)
This three-point mesh set is designed for coverage in several areas. Choose the number you need to suit your home.
The product description lists Wi-Fi 6 and dual-band on 2.4 and 5 GHz.
TP-Link lists optional Ethernet backhaul and three gigabit ports per unit.
View at Joybuy
Frequently asked questions
How can you check whether mesh will help with your cookery class before you buy?
First, use a laptop and an Ethernet cable to test your internet connection, then compare it with Wi-Fi in your home office. If only the Wi-Fi test is poor there, look into your router’s position or ways to extend coverage. If the wired connection is poor too, check your connection with your provider first. Recommendations from a video service apply to that service and picture quality.
Where should you put an extra Wi-Fi point?
Don’t put a wirelessly connected point where the original signal has already dropped out. Keep obstacles between the points to a minimum, use the system’s placement tool and keep your router and Wi-Fi points up to date.
Can you keep your provider’s router?
Yes, if your system offers a suitable access point mode. TP-Link says that in this mode, Deco can extend your existing network while the main router continues to assign IP addresses, among other things. Check which features aren’t available in this mode and follow the instructions for your model.