Who is home-learning mesh Wi-Fi for?

Households with simultaneous video lessons

For consumers with several active devices or video calls during a language lesson. It’s important to consider both your home Wi-Fi and the capacity of your broadband connection.

Teachers in rooms beyond the router’s range

For consumers teaching from another room or floor who want to check whether the connection between the router, mesh point and teaching device is good enough in that location.

Users with a network cable to the teaching room

For consumers who can use an existing cable connection to link mesh points to each other by wire.

What should you look for when choosing?

Mesh with Ethernet backhaul

Choose this if: there’s a usable network cable running to the teaching room or another floor.

Bear in mind: you’ll need suitable cables and connections. Also check how many Ethernet ports will remain free.

Fully wireless mesh

Choose this if: there’s no cabling and you have a suitable spot where the extra point can still get a good wireless signal from the main unit.

Bear in mind: your home and the placement of the points affect the connection between them.

Extending an existing FRITZ! mesh system

Choose this if: you already use a compatible FRITZ!Box and want to extend the range of its mesh network.

Bear in mind: the settings transfer described applies when using a FRITZ!Box; it won’t automatically work with a router from another brand.

What to consider What to look for Who it’s for
Capacity for simultaneous use Count active teaching devices and other calls. Check your broadband connection’s upload and download speeds, and compare the capacity of the exact system you’re considering. If several people are taking part at once, I want to know whether both the Wi-Fi and internet connection can handle the demand. For consumers who prioritise capacity, this is the main consideration for around 33%.
Coverage in the teaching room Map out rooms, floors and possible locations for mesh points. Compare coverage measurements in relevant rooms, if available. If the lesson takes place in a room beyond the router’s range, I want a usable connection there without placing a mesh point somewhere that already has poor reception. Around 27% of consumers prioritise coverage in the teaching room.
Connection between mesh points Check whether the exact model supports Ethernet backhaul, how many ports will remain available and whether a cable route is practical. If there’s a cable to the teaching room, I want to know whether I can use it to connect the points to each other. For consumers who place the greatest importance on the connection between mesh points, this is the priority for around 27%.
Set-up and management Check the set-up and access point options, power consumption per point and applicable warranty terms. If I want to set up and manage the network easily, I want to be able to compare its features with what I already use. Around 13% of consumers say management and ongoing costs are their main consideration.

Zoom Support recommends 2.6 Mbit/s upload and 1.8 Mbit/s download for a single group video call in 720p, subject to Zoom’s HD video requirements. This is a service-specific guideline, not a general bandwidth guarantee for multiple simultaneous calls.

Common buying mistakes

  • Confusing Wi-Fi speed with internet speed

    Wi-Fi specifications and your internet connection’s upload and download speeds describe different things. A higher theoretical Wi-Fi speed won’t fix a slow broadband connection.

    Check both your broadband connection and the coverage where the lesson takes place before comparing systems by their theoretical top speeds.

  • Putting an extra mesh point somewhere with a poor signal

    An extra point still needs a usable connection to the other point. Otherwise, coverage in the teaching room may be disappointing.

    First, identify possible locations and cable routes. This will help you work out whether wireless placement is enough or whether you can use an existing cable.

    You may not need an extra point or later cabling work if you check the placement first.

  • Treating the Deco X50 and Deco X50-PoE as the same model

    TP-Link lists different connection and power options for the Deco X50 and X50-PoE. Their model names don’t mean they have interchangeable specifications.

    Check the full model name, pack size, ports and intended power supply. A PoE set-up requires compatible power or network equipment.

Brands to compare

TP-Link

According to TP-Link, the Deco X50 is a Wi-Fi 6 mesh option with three gigabit ports per point and optional Ethernet backhaul.

  • The Deco X50 can connect points to each other via Ethernet backhaul if the necessary cables and connections are available.
  • Don’t confuse the standard X50 with the separate X50-PoE model. Check the ports, power supply and mounting options for each version.

ASUS

According to ASUS, the ZenWiFi XD5 is a Wi-Fi 6 mesh option that supports Ethernet backhaul.

  • ASUS says you can use Ethernet backhaul if there are Ethernet ports in your walls.
  • You’ll need compatible devices to use Wi-Fi 6. ASUS also notes that 160 MHz on 5 GHz may be restricted in some regions. Stated coverage isn’t a measurement of your home.

FRITZ!

The FRITZ!Repeater 3000 AX is one option for extending an existing FRITZ!Box mesh network.

  • FRITZ! describes a LAN bridge and settings transfer when used with a FRITZ!Box.
  • This stated integration doesn’t prove that the same features are available with a router from another brand.

NETGEAR

According to NETGEAR, the Orbi RBK752 is a tri-band Wi-Fi 6 system with a dedicated wireless connection between the router and satellite.

  • The dedicated wireless backhaul is a model specification worth comparing.
  • This isn’t an independent guarantee of the quality of your connection during lessons. Check the exact system and its connection options.

Joybuy products for home learning

These Joybuy products are home mesh Wi-Fi systems, including versions with Ethernet backhaul or PoE. Check which connections and power supply suit the cable route and teaching room in your home.

TP-Link Deco X50 (3-pack) dual-band Wi-Fi 6 mesh system

TP-Link Deco X50 (3-pack)

An option to compare if you’re looking for a mesh system with optional Ethernet backhaul.

Dual-band Wi-Fi 6 (802.11ax); three gigabit ports per point according to the product description.

View at Joybuy
TP-Link Deco X50-PoE (2-pack) dual-band Wi-Fi 6 mesh system

TP-Link Deco X50-PoE (2-pack)

An option to compare if you’re looking for an X50-PoE system with two points and PoE power.

Dual-band Wi-Fi 6 (802.11ax); two Ethernet ports per point according to the product description.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack) tri-band Wi-Fi 6E mesh system

TP-Link Deco XE75 Pro (3-pack)

An option to compare if you’re looking for a three-point mesh network with tri-band Wi-Fi 6E.

Tri-band Wi-Fi 6E (802.11ax), with 2.4 GHz, 5 GHz and 6 GHz bands according to the product name.

View at Joybuy
TP-Link Deco XE75 (3-pack) tri-band Wi-Fi 6E mesh system

TP-Link Deco XE75 (3-pack)

An option to compare if you’re looking for a tri-band Wi-Fi 6E mesh system with three points.

Tri-band Wi-Fi 6E (802.11ax), with 2.4 GHz, 5 GHz and 6 GHz bands; three gigabit Ethernet ports per point according to the product description.

View at Joybuy
TP-Link Deco X50-PoE (3-pack) dual-band Wi-Fi 6 mesh system

TP-Link Deco X50-PoE (3-pack)

An option to compare if you’re looking for an X50-PoE system with three points and PoE power.

Dual-band Wi-Fi 6 (802.11ax); two Ethernet ports per point according to the product description.

View at Joybuy

Frequently asked questions

How much internet bandwidth do I need for an online language lesson?

It depends on the service you use, the video quality and the number of simultaneous calls. Zoom Support recommends 2.6 Mbit/s upload and 1.8 Mbit/s download for a single group video call in 720p, subject to its HD video requirements. Test your own connection, and don’t treat this as a general guarantee for multiple users.

Can I connect my own mesh router to my internet provider’s modem?

In many cases, yes, but check the settings you’ll need and your provider’s requirements. ACM ConsuWijzer says that a provider cannot simply require you to use a particular modem or router brand or model. Access point mode may be relevant if your chosen system supports it.

Do I need a radio licence to use Wi-Fi during a home lesson?

In the Netherlands, you don’t need a licence, notification or registration to use Wi-Fi on the designated licence-exempt frequencies. The Dutch Authority for Digital Infrastructure says this applies to both private and business use. The relevant conditions of use and equipment requirements still apply.

What can I do after installation to check the connection?

Test the mesh points with your teaching devices in the places where lessons actually take place. Position wireless points where they can still get a good signal from each other, or use Ethernet backhaul if the exact model and cabling allow it. Keep the firmware up to date too.

What should I check to make sure a Wi-Fi router is safe?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi routers must carry the correct CE marking. The authority reported that stricter European requirements have applied since 1 August 2025 to wireless devices placed on the EU market. Check the specific product and its documentation; a model name alone doesn’t show that an individual unit meets the requirements.