Who is this guide for?

A hobby room with a weak signal

You want to get online at the back of the house, and in particular, check whether the furthest Wi-Fi point can still connect reliably to the rest of the network.

Working from home at an upstairs desk

You need a reliable connection at your workspace and may be able to use a network cable to connect the Wi-Fi points to each other.

Using your existing broadband router

You want to keep your current router and add Wi-Fi coverage in a way that works with your setup.

What should you look for in mesh Wi-Fi?

Mesh with Ethernet backhaul

Choose this if: there’s a suitable network cable between the planned points, or you can install one.

Bear in mind: the cable route and the ports on your chosen units. TP-Link says Deco uses Ethernet backhaul between units that are actually connected by cable.

Fully wireless mesh

Choose this if: you can’t run cables and can find an intermediate spot where a point still gets a good signal from the network.

Bear in mind: walls and ceilings can weaken the wireless signal. Once everything is set up, check the connection between the points, not just the signal at your desk.

What to consider What to look for when buying Who is this important for?
Coverage in the hobby room at the back of the house Check the number of points and where you could place them; also test the connection between the points. If the hobby room at the back of the house is the hardest place to reach, I want to make sure I can get a usable signal there first. Around 36% of consumers make hobby room coverage their top priority.
Connection at an upstairs desk Test the signal at your workspace and check whether you need an Ethernet port on the point for a wired device. I want to work upstairs, so I’ll check whether the signal is good enough at my desk. Around 29% of consumers prioritise their upstairs connection.
Wired connections between Wi-Fi points Check whether there’s a cable route, whether your chosen units support Ethernet backhaul and how many ports are available. If I can run a cable between the points, I want to know whether the set I choose supports it. Around 21% of consumers prioritise a wired connection between points.
Connection to your existing router Check which router or access point modes are available and which features or connections you need. I want to keep using my broadband router, so I’ll check in advance how mesh connects to it. Around 14% of consumers make keeping their existing router their top priority.

Common buying mistakes

  • Assuming the stated coverage area is guaranteed

    Walls, ceilings and distance all affect coverage in your home. What’s more, a point placed in the room with the weakest signal won’t necessarily have a good connection to the rest of the network.

    Test the connection in both workspaces, and check the connection between the Wi-Fi points too.

    If wireless placement doesn’t provide a reliable connection, you may still need another point or a wired connection.

  • Assuming every extender has an Ethernet port

    According to eero, the eero 6+ router has Ethernet ports, but the eero 6+ extender doesn’t. Ports can therefore vary from one unit to another.

    Check the ports on every unit in the exact version you’re considering.

    If you want to connect a point by cable, you may need a different unit if your chosen extender doesn’t have an Ethernet port.

  • Adding extra points without checking the router mode

    According to TP-Link, connecting Deco incorrectly by cable while it’s in router mode can create a network loop.

    First, decide which device will handle the router functions, then follow the connection instructions for your chosen mode.

Brands to consider

TP-Link

The Deco X50 range includes Wi-Fi 6 models with gigabit ports. TP-Link says Deco units connected by cable can use Ethernet backhaul. The separate X50-PoE range is designed for models powered over Ethernet.

  • TP-Link lists three gigabit ports on each Deco X50 unit.
  • Check the number of units and the exact model; the X50 and X50-PoE are different models.

ASUS

ASUS describes the ZenWiFi XD5 as a Wi-Fi 6 mesh system that supports Ethernet backhaul and lets you choose between one network name or separate ones.

  • These setup options may be useful if you need Ethernet backhaul or separate network names.
  • ASUS says 160 MHz on 5 GHz may have limited availability in some regions. A stated maximum speed doesn’t tell you what speeds you’ll get at your desk.

NETGEAR

NETGEAR describes the Orbi 770 as a tri-band Wi-Fi 7 mesh system with an option for 2.5-gigabit wired backhaul.

  • The manufacturer lists a 2.5-gigabit wired backhaul option.
  • These are manufacturer specifications and claims, not measurements taken in your home. Check whether you need the connections and extra features for your setup.

eero

According to eero, the router in the eero 6+ range has Ethernet ports, while the separate wireless extender doesn’t.

  • The difference between the router and extender can help you assess whether a wired connection is possible.
  • Check the connections on the specific unit; don’t assume every version has the same ports.

Mesh Wi-Fi products at Joybuy

These products are options to compare for Wi-Fi coverage in a hobby room at the back of the house and at an upstairs desk. For each set, check that the number of points, connections and supported features suit your setup.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A set of two to compare if you’re considering two points; check that the number and placement work for both workspaces.

View at Joybuy
TP-Link Deco E4 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 3-pack

A set of three to compare if you need coverage in several areas of the house; check where you can place the points and whether they’ll reach both workspaces.

The product name specifies dual-band Wi-Fi 5 (2.4 GHz and 5 GHz; 802.11ac).

View at Joybuy
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack

A set of two to include in your comparison; check whether you can place both points where they’ll maintain a good connection to each workspace.

The product name specifies tri-band Wi-Fi 7 (2.4 GHz, 5 GHz and 6 GHz; 802.11be).

View at Joybuy
TP-Link Deco M4 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 3-pack

A set of three to compare if you want to assess several placement options for your two workspaces.

The product name specifies dual-band Wi-Fi 5 (2.4 GHz and 5 GHz; 802.11ac).

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

A set of three to compare if you think you’ll need several Wi-Fi points; test whether their placement can cover both workspaces.

The product name specifies dual-band Wi-Fi 6 (2.4 GHz and 5 GHz; 802.11ax). TP-Link lists three gigabit ports on each Deco X50 unit and Ethernet backhaul between wired units.

View at Joybuy

Frequently asked questions

How can you tell whether mesh will solve the problem?

First, compare the connection by your router with the Wi-Fi in both workspaces. The Consumentenbond recommends allowing for walls, ceilings and other obstacles. If the connection is already slow by the router, check your internet connection first.

Where should you place a wireless mesh point?

Choose a spot where the point can still get a good signal from another point, then check the connection after installation. A spot deep inside a room with poor coverage isn’t automatically suitable.

When is Ethernet backhaul useful?

Ethernet backhaul is an option if you can connect the mesh points with a network cable. TP-Link says that with Deco, only units actually connected by cable use that wired connection.

Can you connect mesh to your existing broadband router?

You can with systems that support the required mode. TP-Link generally recommends access point mode for Deco connected behind an existing router that will continue to handle the router functions. Follow the connection instructions for the mode you choose.

How do you know how many mesh points you need?

Test the coverage in the hobby room and at your desk, and check the connection between the points too. Then decide whether you need another point or a different placement. A stated floor area alone won’t tell you how walls and ceilings affect the signal in your home.