Start by considering how the mesh point will connect to the rest of your network. Ethernet is a reliable option if you can run a cable, while a wireless node needs to receive a strong enough signal itself. If there’s no way to run a cable and Wi-Fi performance is poor, powerline could be an alternative to test using the sockets you plan to use. Then choose a mounting option that works with your limited shelf space.
Who is this guide for?
Hobbyist with weak Wi-Fi at the back of the house
You want a connection in the back room and need to work out whether a wireless node will receive a strong enough signal there, or whether you need a different connection between the mesh points. The Consumentenbond recommends placing a Wi-Fi extender where the signal needs a boost.
Hobbyist with no shelf space
You have little room for a desktop unit and are comparing wall or ceiling mounting, PoE power and a compact plug-in node for the spot where the device actually needs to go.
Hobbyist with tricky cabling
You can’t easily run an Ethernet cable and want to find out whether a wireless node or powerline mesh will work with the sockets in your home.
What should you look for?
First, consider how the mesh point at the back of the house will connect to the network. Then choose a mounting and power option to suit the space available.
| What to consider |
What to look for when buying |
Who is this important for? |
| Connection at the back of the house |
Check where the existing signal is still usable, then test the connection from the extra node in that spot. |
If I mainly need Wi-Fi in the back room, I want to avoid placing the mesh point somewhere with poor reception. Around 36% of consumers say coverage is their main concern. |
| Placement without a shelf |
Check the mounting hardware, available sockets and cable route. For PoE, the power source must meet the required standard. |
If I don’t have a spare shelf, I want a mounting option that suits the chosen spot without overlooking the connection. Around 29% of consumers prioritise placement without needing shelf space. |
| Connection between mesh points |
Compare a practical Ethernet route with a wireless connection, and test powerline using the wall sockets you plan to use. |
If the mesh point at the back of the house needs a stable connection to the rest of the network, I want to know which option will work in my home. For around 21% of consumers, the connection between mesh points comes first. |
| Installation and required equipment |
Check compatibility with your existing router and whether the model you’ve chosen includes the required power supply and mounting hardware. |
If I want the installation to work with my existing network, I also need to check which parts and connections are required. Around 14% of consumers say installation and required components are their main concern. |
Mesh Wi-Fi pitfalls
-
Putting an extra node where reception is at its worst
The mesh point at the back of the house needs to stay connected to the rest of the network. So the furthest spot in your hobby room isn’t automatically the right place for it.
First, try a midway spot where the existing signal is still usable. After setting it up, check the connection quality.
If the connection isn’t strong enough there, you may need to try a different location or run a cable.
-
Assuming every Ethernet port supplies PoE
TP-Link says the Deco X50-PoE supports PoE via 802.3at or 802.3bt, but not 802.3af. So the connection needs to match the power source you’re using.
Check the source’s PoE standard and what’s included with the model you’ve chosen. TP-Link also lists a DC power adapter.
PoE may require a compatible injector or switch and a suitable cable route.
-
Assuming powerline will work in every home
Performance depends on your home’s electrical wiring. TP-Link warns that filters in extension leads or converters can interfere with the powerline signal.
Test the sockets you plan to use by plugging directly into wall sockets. Don’t assume a Deco PX10 will form a powerline mesh with a separate adapter.
If performance is poor, you may need to try a different location or run a cable after all.
-
Confusing an expansion node with a complete mesh system
According to NETGEAR, the Orbi 770 expansion satellite is designed for an existing Orbi 770 system. The mesh features of a FRITZ!Repeater also depend on your network configuration.
Before buying, check which main unit you already have, whether it’s compatible and what’s included in the set you’ve chosen.
An expansion node may mean you also need a compatible main unit or a complete set.
Brands to consider
TP-Link
The Deco X50-PoE, PX10 and X50 offer different ways to connect or position mesh points. The right choice depends on where you’ll place them, your cabling and your home’s electrical wiring.
- TP-Link says the Deco X50-PoE can be mounted on a wall or ceiling. PoE requires 802.3at or 802.3bt; 802.3af isn’t supported.
- The Deco PX10 uses powerline to connect Deco units.
- The PX10 connection depends on your home’s electrical wiring. According to TP-Link, it doesn’t create a shared powerline network with a separate adapter.
ASUS
The ZenWiFi XD5 is a mesh option to consider if you need Ethernet backhaul or documented wall-mounting support.
- ASUS describes Ethernet backhaul for situations where Ethernet ports are available. It also provides documentation on wall mounting in Europe.
- Check the model and included mounting hardware for the specific set you’re considering. This alone doesn’t tell you what coverage you’ll get in a particular hobby room.
FRITZ!
The FRITZ!Repeater 1200 AX is worth considering as a compact plug-in node for a compatible existing FRITZ!Box setup.
- FRITZ! describes connecting to the FRITZ!Box via Wi-Fi or LAN.
- Don’t assume FRITZ! mesh features will work with just any router without checking compatibility.
NETGEAR
The Orbi 770 expansion satellite is designed to extend an existing Orbi 770 system.
- NETGEAR describes the satellite as an addition to the Orbi 770 range.
- A standalone expansion satellite isn’t, by itself, a proven solution if you don’t already have the corresponding system.
Joybuy products for this situation
These products include mesh systems for wired or wireless connections between nodes, as well as compact mesh options for use in several rooms.
No image available
TP-Link Deco BE68 (2-pack)
An option to consider if you’re looking at a setup with wired or wireless backhaul.
Set of 2 mesh units.
Joybuy
No image available
TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5
A wireless mesh option if you want to place several nodes around your home.
The listed Ethernet ports support speeds of up to 100 Mbit/s. Bear this in mind if you want to connect the units by cable.
Joybuy
No image available
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7
A two-node mesh system to compare if you’re considering a wireless mesh setup.
Joybuy
No image available
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5
A set of three mesh points to consider if you want to connect several areas of your home.
Joybuy
No image available
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6
A set of three mesh units to consider if you want to place several nodes around your home.
Joybuy
Frequently asked questions
Where should you put a wireless mesh point for a hobby room at the back of the house?
Don’t automatically put it in the furthest spot. First, look for a midway location where the node can still get a usable connection to the router. ASUS recommends placing a wireless AiMesh node between the router and the dead zone; then check coverage in the hobby room too.
Can a Deco X50-PoE work without a PoE switch?
Yes. TP-Link lists a DC power adapter in the box. To power it over the network cable, you’ll need a compatible 802.3at or 802.3bt source; 802.3af isn’t supported.
Can I plug a Deco PX10 into an extension lead?
TP-Link recommends plugging Powerline Deco directly into a wall socket, as filters in some extension leads or converters can interfere with the signal. Also check whether the sockets you plan to use can communicate with each other through your home’s electrical wiring.
Do I need a licence for home Wi-Fi in the Netherlands?
According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi on designated frequencies doesn’t require notification or registration. However, equipment must still meet the applicable requirements.
What should I look for with CE marking and warranties?
Radio equipment sold in the Netherlands must meet the applicable requirements of the Radio Equipment Directive, and compliant equipment must carry a CE mark. Check the model and marking on the specific product you’re considering. The ACM states that, in addition to any commercial warranty, consumers in the Netherlands have a statutory guarantee.