Who is this set-up for?

A studio with tricky coverage

You want to be able to work in the separate hobby room too. Decide whether the connection will be wired, wireless or provided by a separate link between the buildings.

A team working at the same time

Several people use laptops, video calls and shared online files at once. Consider the connection and the ports available at the workstations.

A studio that welcomes visitors

Clients or other visitors need internet access, but not necessarily the same network access as your work devices. Look for guest network features and easy management.

What should you look for?

Start with the connection between the studio and hobby room. Then compare support for simultaneous use, guest access, compatibility and the overall cost.

Wired mesh

When to choose it: if there is, or you can install, a suitable network cable to the hobby room, and both mesh nodes support ethernet backhaul.

Trade-off: the connection between the nodes runs over the cable, but the cabling and installation still need to suit the spaces.

Wireless mesh

When to choose it: if running a cable is not possible and a test at the intended location shows that the intermediate mesh node maintains a strong enough connection.

Trade-off: walls, distance, interference and simultaneous traffic can all affect the connection you actually get. TP-Link notes that environmental factors can affect coverage and throughput.

Outdoor node or link between buildings

When to choose it: if the hobby room is in a detached outbuilding and a standard connection between indoor nodes does not seem suitable. A point-to-point bridge could provide a separate link; you may then need a Wi-Fi node inside the hobby room as well.

Trade-off: an indoor model is not automatically suitable for outdoor use. TP-Link describes the X50-Outdoor as having an IP65 rating; for a bridge, also check its location and the applicable radio version.

Extending an existing FRITZ! network

When to choose it: if the studio already uses a suitable FRITZ! Mesh Master. FRITZ! describes connecting the FRITZ!Repeater 3000 AX via LAN.

Trade-off: check your existing router. Using the repeater with another router is not the same as integrating it with a FRITZ! Mesh Master.

What to consider What should you check? Who should pay particular attention?
Coverage in the hobby room Check whether the room is in the same building, whether you can run cabling and how the connection performs at the workspace. If I want to work in the hobby room, the network needs to be usable there too. Around 29% of consumers put coverage between rooms first.
Simultaneous work and connections Count the devices that will be active at the same time and check how many usable LAN ports each unit has. If several people work at once, I want to account for their devices and applications. Around 23% of consumers give simultaneous work sessions top priority.
Guest access Check what the guest network keeps separate and who can change its settings. If clients or visitors need internet access, I want to be able to manage their access separately. Around 18% of consumers put guest access first.
Existing network Make a note of your modem and router, and check which router or access point modes are available and whether both units support backhaul. If I want to keep my existing network, the new equipment needs to work with my current set-up. Around 18% of consumers put compatibility with their existing network first.
Overall cost Compare complete sets and allow for any extra nodes, cabling and installation. If I want to connect the studio and hobby room without unnecessary extras, I want to work out what the set-up needs first. Around 12% of consumers put the overall cost first.

What to watch out for

  • Assuming an advertised coverage area guarantees coverage in both rooms

    Actual coverage and throughput can vary depending on factors such as building materials, obstacles and where the devices are placed.

    Test the connection at the workspace in the hobby room before making a decision based on a coverage claim.

    You may need an extra node or a different connection between the rooms.

  • Installing an indoor unit outdoors

    Outdoor features do not automatically apply to a standard mesh unit. TP-Link specifically describes the X50-Outdoor as having an IP65 rating.

    For outdoor use, choose a model designed for it and check that the whole installation is suitable for the location.

    An outdoor-rated node and suitable mounting may involve extra installation work.

  • Assuming a higher Wi-Fi version or Mbps claim will fix a weak connection

    According to the Consumentenbond, the Wi-Fi version alone does not tell you enough about performance. The environment and the connection between the nodes matter too.

    First make sure the connection between the rooms works, then compare Wi-Fi versions and port speeds.

  • Assuming the same model name means the specifications are identical

    Hardware versions can differ. For example, the ASUS ZenWiFi XT9 listing differs from the ASUS specification for the stated number of internal antennas.

    Before buying, check the exact model, hardware version and accompanying conformity documentation. The Rijksinspectie Digitale Infrastructuur says that equipment sold in Europe must carry the CE mark; check this for the specific version you are buying.

Relevant brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh option; the X50-PoE is designed for PoE-powered installation, while the X50-Outdoor is intended for a node that will actually be installed outdoors.

  • TP-Link lists optional ethernet backhaul for the Deco X50, PoE for the X50-PoE and an IP65 rating for the X50-Outdoor.
  • These model specifications do not predict coverage in your hobby room. Check the model and hardware version too.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 option to compare if you are weighing up wireless backhaul and network management.

  • ASUS lists router and access point modes, a guest network, a 2.5G WAN port and three gigabit LAN ports for the XT9.
  • These features do not guarantee a wireless connection to another room. Check the exact model and product specifications.

NETGEAR

The Orbi 370 is a Wi-Fi 7 mesh range to compare if multiple nodes and wired backhaul are relevant to your set-up.

  • For the Dutch RBE373 set, NETGEAR lists three nodes and a 2.5G wired backhaul option.
  • The manufacturer's stated coverage and speed do not prove that the signal will reach a detached hobby room.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend an existing, compatible FRITZ! Mesh set-up.

  • FRITZ! describes connecting the repeater via LAN to a FRITZ!Box and lists two gigabit LAN ports.
  • Check that your existing router is the right Mesh Master. Using the repeater with another router does not prove that it will offer the same mesh integration.

Ubiquiti

The UniFi Building Bridge provides a separate connection between two buildings; it is not a mesh node for the hobby room itself.

  • Ubiquiti describes it as a point-to-point connection between buildings.
  • Check line of sight, mounting and the appropriate radio version separately. You may still need a Wi-Fi node indoors.

Joybuy products for this set-up

These Joybuy products are mesh sets with multiple network nodes for the studio and hobby room. Check which connection options and ports suit your set-up for each model.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 (2.4/5 GHz), white

Worth considering if you are looking for a Wi-Fi 7 mesh system. Check whether this exact model supports the connection you need between the rooms.

The product name lists Wi-Fi 7 (802.11be), dual-band (2.4 GHz / 5 GHz) and 2 internal antennas.

Joybuy
TP-Link Deco X50 three-unit mesh set, Wi-Fi 6

TP-Link Deco X50 (3-pack), Wi-Fi 6

Worth considering if you want to compare three mesh nodes for the studio and hobby room. Where you place them will also affect the connection.

The product name lists Wi-Fi 6 (802.11ax). TP-Link describes optional ethernet backhaul for the Deco X50; check that the feature suits the model and set-up you choose.

Joybuy
TP-Link Deco X50-PoE two-unit mesh set, Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), Wi-Fi 6

Worth considering if you are looking for two mesh nodes and want to explore PoE for your installation. Check the power supply and connections required for this exact model.

The product name lists Wi-Fi 6 (802.11ax).

Joybuy
TP-Link Deco XE75 Pro three-unit mesh set, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

Worth considering if you want to compare three mesh nodes and tri-band Wi-Fi 6E. First check whether these features suit your devices and the connection between the rooms.

The product name lists tri-band (2.4 GHz / 5 GHz / 6 GHz) and Wi-Fi 6E (802.11ax).

Joybuy
TP-Link Deco XE75 three-unit mesh set, tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

Worth considering if you want to compare a tri-band mesh set with multiple network nodes. Check which model and connections suit your workstations.

The product name lists tri-band (2.4 GHz / 5 GHz / 6 GHz) and Wi-Fi 6E (802.11ax).

Joybuy

Frequently asked questions

Is one extra mesh node enough for a detached hobby room?

You cannot be sure without checking the connection to the room. Test a wireless set-up. If it does not work, compare a suitable wired connection or a separate bridge between the buildings, with a Wi-Fi node in the hobby room.

How can you check after installation whether a mesh node is connected by cable?

Check the connection status in the management settings for your chosen system. For example, TP-Link describes an ethernet icon next to the satellite for compatible EasyMesh routers. Follow the instructions for the mesh model you are using.

Can you use your own router in the Netherlands?

Yes. The Autoriteit Consument & Markt describes the freedom to choose your own router. A provider can refuse an unsafe device, and using your own modem is subject to connection requirements. If necessary, ask your provider for the settings. This does not mean that every mesh node can replace a modem directly.

Do you need a licence for standard Wi-Fi in your studio?

According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi at home or in a business building does not require a licence if you use the designated frequencies and comply with the conditions of use. This does not automatically mean that every setting is permitted for a specific outdoor installation.

What should you check when it comes to buying and support?

Check the exact model, the correct CE mark and the available updates. Also make a note of whether you are buying as a consumer or on behalf of the studio as a business; support terms may depend on how you buy.