Who is this buying guide for?

Watching videos in a separate room

You want to keep accessing your library while videos are playing. First, check whether the room is in the same building and where a mesh node can still maintain a connection to the main network. The Consumers’ Association explains why the positioning of Wi-Fi boosters matters.

Owner of a detached hobby room

First, assess the connection between the buildings. A Wi-Fi node in the hobby room won’t automatically solve a lack of connection to the house. ASUS describes wired backhaul as an option when there’s a long distance between mesh nodes.

Using a local media server

You want your server, network nodes and playback device to be able to communicate over the local network. Plex explains the role of your local network setup, so check your router, access point and guest network settings too.

What should you look for when buying?

Start with the route to your hobby room: a room in the same building and a detached outbuilding don’t have the same connection requirements. Then check access to your media server and the connections you need.

Mesh with wired backhaul

Choose this option if: there’s a suitable Ethernet connection between the locations, especially if the wireless connection between nodes is weak.

Bear in mind: you’ll need a cable and possibly a switch. ASUS describes wired AiMesh backhaul as a configuration option, while Plex says Ethernet is generally faster and more reliable than Wi-Fi.

Fully wireless mesh

Choose this option if: you can’t run a cable and an intermediate mesh node can maintain a connection to the main network from the position you’ve chosen.

Bear in mind: distance and obstacles still matter. An advertised coverage area doesn’t guarantee a connection to a detached building.

Connecting to an outbuilding

Choose this option if: your hobby room is detached and a wireless mesh connection there proves inadequate. First, consider how you can establish a connection to the building.

Bear in mind: a Wi-Fi node rated for outdoor use may be relevant if it needs to be installed outside, but a weather-resistant casing doesn’t prove that the signal will be strong enough through walls.

The percentages below show consumers’ main buying priorities in this situation.

What to consider What to look for when buying Who is this important for?
Connection to the hobby room Check whether a cable is available and assess the connection at the positions where you plan to install the nodes. If my main concern is preventing the connection between my home and hobby room from disrupting playback, reliability comes first; around 36% of consumers say the connection to the room is their top priority.
Local access to the library Check the router or access point mode and test whether the player can reach the server on the intended local network. If you want your player to be able to access the media server, you should also check for network isolation; around 29% of consumers give local access top priority.
Ethernet ports Count the connections needed for backhaul, the server and the player on each mesh node, and check the exact model variant. If I want to connect my server or player by cable as well as using backhaul, I check the number of ports on each node; around 21% of consumers put wired connections first.
Installation and use Check app requirements, update support, energy use, and whether you’ll need any network cables or switches. If you want to keep installation and setup to a minimum, and need to account for using multiple nodes, compare these points in advance; around 14% of consumers make installation and ongoing costs their main priority.

Common buying mistakes

  • Assuming a large coverage area guarantees a signal in an outbuilding

    Distance and obstacles along the route affect whether the mesh nodes can reach each other. A coverage area on its own doesn’t tell you whether the connection to a detached hobby room will work.

    Work out where a node can still maintain a connection to the main network. If that wireless connection isn’t good enough, look into a wired option.

    You may still need network cables or have to install an access point somewhere else.

  • Connecting a player to an isolated guest network

    Wi-Fi and internet access don’t automatically mean that your player can reach the media server on the main network. TP-Link says that, when Deco is in router mode, the guest network and main network are isolated.

    Check the network mode and test whether the player can access the server locally before buying extra equipment.

  • Comparing only the advertised Wi-Fi speed

    For sharing videos, the connection between mesh nodes and the available ports matter too. A port used for backhaul can’t be used for another device at the same time.

    Count the ports needed for the server, player and backhaul on each node. ASUS describes wired AiMesh setups using a switch, so check that the model you choose suits this configuration.

    If you don’t have enough connections, you may need extra network cable or a switch.

Brands to consider

TP-Link

Deco models may suit a mesh setup where you’re considering the ports on each node and possibly a separate outdoor node.

  • TP-Link lists three gigabit ports per Deco X50 unit and app-based installation.
  • According to TP-Link, the X50-Outdoor has an IP65-rated casing and supports wired or wireless connections. This doesn’t tell you whether the signal will be strong enough in your particular hobby room.

FRITZ!

The FRITZ!Mesh Set 1700 is worth considering if you want to combine a mesh set with an existing router.

  • FRITZ! says it can be used with a FRITZ!Box or another router, and lists automatic updates.
  • Check the number of units in the set and how they connect. The manufacturer page cited describes a two-piece set; it doesn’t tell you whether other versions will suit the distance you need to cover.

ASUS

AiMesh and ZenWiFi setups are worth considering if you want to tailor the network layout or the connection between nodes.

  • ASUS provides guidance on wired backhaul, including setups with a switch and access point mode.
  • This guidance doesn’t guarantee measured performance for a particular model in your home.

NETGEAR

The Orbi 770 series may be worth considering if ports and wired backhaul are important to you.

  • NETGEAR lists an option for 2.5-gigabit wired backhaul for the series.
  • An advertised top wireless speed or coverage area won’t predict the measured throughput between your home and hobby room.

Joybuy products

These mesh options are intended for situations where you want to consider wired backhaul, wired connections or multiple Wi-Fi nodes when choosing a setup for a video library in a separate hobby room.

TP-Link Deco X50 3-pack mesh Wi-Fi system

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

May suit you if you want to use three mesh nodes and have the option of Ethernet backhaul.

Three gigabit ports per node; Wi-Fi 6 (802.11ax).

Joybuy
TP-Link Deco XE75 mesh Wi-Fi system, three-piece set

TP-Link Deco XE75, tri-band Wi-Fi 6E (3-pack)

May suit you if you want three mesh nodes and wired connections; also check that your media server is accessible on the local network.

Tri-band on 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 6E (802.11ax); three gigabit ports per node.

Joybuy
TP-Link Deco X50-PoE 3-pack mesh Wi-Fi system

TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

May suit you if you want three mesh nodes and are considering a wired power option for installation.

Wi-Fi 6 (802.11ax); PoE support; two Ethernet ports per node. Bear in mind the number of ports you’ll need for wired devices and backhaul.

Joybuy
TP-Link Deco X50 2-pack mesh Wi-Fi system

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

May suit you if you’re looking for two mesh nodes and want to factor Ethernet backhaul or wired connections into your plans.

Wi-Fi 6 (802.11ax); three gigabit ports per node.

Joybuy
ASUS ZenWiFi BD4 mesh Wi-Fi system

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

May suit you if you want to consider wired backhaul and 2.5-gigabit ports; bear in mind that this version includes one mesh node.

Wi-Fi 7 (802.11be); two 2.5-gigabit Ethernet ports; one mesh node included. You’ll need to add more nodes for a multi-node mesh setup.

Joybuy

Frequently asked questions

Do I need faster internet to stream locally to my hobby room?

Not just for local playback. Focus on the connection between your server, mesh nodes and player. This is about local network traffic, not remote access or the internet features of a particular media server.

Why can’t my player find the video library on the guest network?

According to TP-Link, Deco’s guest network and main network are isolated when it’s in router mode. An option for local access may be available in access point mode; the settings vary by model and software version. Check the settings or connect the player to the network that the server is accessible on.

How can I keep my video library network secure?

The Dutch Data Protection Authority recommends using strong passwords, changing default login details and regularly updating connected devices. Also check who has access to your shared library.

What can I do if a mesh node breaks sooner than I could reasonably expect?

In the Netherlands, statutory consumer rights apply in addition to any manufacturer’s warranty. ACM ConsuWijzer says that, if a product is faulty despite being used normally, the retailer must offer an appropriate solution free of charge. Statutory rights don’t simply have a fixed two-year time limit for every product.

Do I need a licence to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence to use Wi-Fi at home if you use the designated frequencies and comply with the conditions of use. This doesn’t automatically mean that every band or setting on every device is suitable for a particular outdoor setup, so check the relevant conditions.