Who is this guide for?

People with a weak signal at the back of their home

You want to get Wi-Fi to your hobby room and find out whether an intermediate point can still receive a usable signal there, or whether you need an Ethernet cable.

Households streaming on several screens

You want to know whether the connection will hold up when several devices are in use at once. So check the speed on the screens themselves, rather than relying only on the Wi-Fi figure on the box.

People with an Ethernet cable to a room at the back of the home

You may want to use the cable to connect mesh points and check in advance how many Ethernet ports will then be available for your screens.

What should you look for when choosing?

Wirelessly connected mesh points

Choose this option if: you can’t run a cable to the hobby room and an intermediate point still receives a usable signal.

Bear in mind: the connection between the points also uses Wi-Fi, and walls and placement can affect it.

Mesh with Ethernet backhaul

Choose this option if: you have an Ethernet cable running to or towards the hobby room and want to use it to connect the mesh points.

Bear in mind: the cable route you’ll need and the correct connection method for your chosen system.

Extending your provider’s Wi-Fi

Choose this option if: you already use compatible equipment from your provider and want to build on it.

Bear in mind: instructions for products such as KPN SuperWifi apply to the relevant equipment and aren’t a general guarantee for every router.

What to consider What to look for Who should pay particular attention?
Coverage in the hobby room Test the intended location and check whether you can place an intermediate point there or use Ethernet backhaul. If you mainly need a connection at the back of your home, you’ll want to know whether an intermediate point can receive a usable signal there. Around 36% of consumers rank coverage as their top priority.
Streaming on multiple devices at once Test the connection on your screens while they’re all in use, and check the requirements of the streaming services you use. If several screens are in use at the same time, you’ll want to assess the connection in those locations rather than relying on an advertised Wi-Fi speed. Around 29% of consumers prioritise streaming on multiple devices at once.
Cables and ports Work out which ports you’ll need for your router, mesh points and wired screens. If you want to use an existing or planned Ethernet cable, you’ll also want to know how many ports will be left for your screens. Around 21% of consumers prioritise cabling and ports.
Connecting to your network Check your router model, the mode you want to use and whether the installation instructions are compatible with your equipment. If you want to keep using your current router or provider equipment, you’ll want to know in advance how the mesh system connects to it. Around 14% of consumers give connecting to existing equipment top priority.

Things to watch out for when buying

  • Treating the advertised coverage area as a guarantee

    A manufacturer’s claim doesn’t tell you how strong the signal will be through the walls and over the distances in your home.

    Test the connection where you plan to use it and work out whether an intermediate point will be enough or you’ll need a cable between the points.

    If you need more points than the set includes, you may need to buy an extra one.

  • Assuming every mesh system has gigabit ports

    Port speeds and the number of ports vary by model. TP-Link lists gigabit ports for the Deco X50, but that doesn’t automatically apply to other Deco models.

    Check both the port speed and the number of free ports on the version you’re considering.

    If there aren’t enough ports available, you may need additional networking equipment.

Brands to compare

TP-Link

Deco mesh systems, including the Deco X50, are worth comparing if you’re considering a wireless or wired connection between points.

  • According to the official specifications, each Deco X50 unit has three gigabit ports and the system supports Ethernet backhaul.
  • The advertised coverage isn’t a measurement of performance in your hobby room. Also check how to connect the system in router or access point mode.

ASUS

ZenWiFi includes models for different connection needs. The XD5 and BD4 each have their own specifications to consider alongside your network plan.

  • ASUS describes Ethernet backhaul for the XD5 and lists two 2.5G ports for the BD4.
  • These are model specifications, not proof of better performance. Advertised Wi-Fi speeds don’t guarantee the speed you’ll get on your screens.

FRITZ!

The FRITZ!Mesh Set 1700 is an option for anyone who wants to keep using an existing router or fibre-optic modem.

  • FRITZ! says the set can connect via LAN to an existing router or fibre-optic modem.
  • Check what’s included in the set you choose: a pack with two points isn’t the same as one with three.

KPN

SuperWifi points are an option if you want to extend an existing KPN Wi-Fi network.

  • KPN describes how to install the points with a KPN modem, including the installation instructions for SuperWifi.
  • Compatibility depends on your equipment and the generation of the points; this isn’t a general compatibility claim for other routers.

Mesh Wi-Fi products on Joybuy

These product options are intended to extend Wi-Fi around your home, with a focus on connections between mesh points, ports and covering multiple rooms.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68, 2-pack

A two-piece mesh system to compare if you need two mesh points. Check that its connections suit your network plan.

Joybuy
ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

A two-piece mesh system to compare if you’re looking for a tri-band Wi-Fi 7 system. Check that it’s compatible with your existing equipment and suits your needs.

The product name lists tri-band, Wi-Fi 7 and the 2.4 GHz, 5 GHz and 6 GHz bands.

Joybuy
TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

A set with three mesh points to compare if you want to connect several areas of your home. Check the ports for the devices you want to connect by cable.

The product name lists dual-band, 2.4 GHz and 5 GHz, and Wi-Fi 5.

Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

This version is worth considering if you want to run a cable between mesh points. Check the port layout for your router and wired screens.

TP-Link lists three gigabit ports per unit for the Deco X50, as well as support for Ethernet backhaul. Check the connection method for the mode you’ve chosen.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600, dual-band Wi-Fi 7 mesh router

A mesh router to compare if you want to extend Wi-Fi across several rooms. Check which additional units and connections suit your network plan.

The product name lists dual-band and Wi-Fi 7.

Joybuy

Frequently asked questions

How can you tell whether your screens are getting enough speed?

Test the connection on your screens in their final locations, ideally while the other screens are streaming too. Netflix recommends a stable connection of at least 15 Mbps for one 4K UHD stream. Check the requirements for other streaming services separately.

How do you connect Deco points to each other with a cable?

Follow TP-Link’s connection instructions for the mode you’ve chosen. In router mode, TP-Link says a wired satellite must be connected to the LAN side of the main Deco. In access point mode, TP-Link also describes connecting via the main router or modem.

Can you use your own mesh router in the Netherlands?

ACM ConsuWijzer confirms that you can choose your own router, subject to security requirements and the settings you need. The Dutch Authority for Digital Infrastructure says that using Wi-Fi at home does not require a licence, provided you use the designated frequencies and comply with the terms of use. Also check that the device has the correct CE marking.