For anyone with a Wi-Fi dead spot
You mainly want coverage in your hobby room and can place a node in or near the hallway. The signal at that intermediate location will determine whether wireless mesh is a practical solution.
Start with where to place the mesh nodes and how they connect, rather than with the highest advertised Wi-Fi speed. A wireless node needs a usable connection to the previous node; if the hallway or walls get in the way, ethernet backhaul is the more reliable option, provided you have suitable cabling and ports. Then work out how many nodes you need and which connections are required, and test the final setup in your own home.
You mainly want coverage in your hobby room and can place a node in or near the hallway. The signal at that intermediate location will determine whether wireless mesh is a practical solution.
You can connect the nodes by cable and don’t want to rely on a wireless signal travelling through the hallway. Check the available ports and the connections required for your chosen system.
You want to keep your existing internet connection, start with as few extra nodes as possible and manage the setup easily. Check whether the system works with your current router and whether you can add more nodes later.
For consumers looking to improve Wi-Fi in a hobby room beyond a narrow hallway, the choice mainly depends on where the intermediate node goes and how the mesh nodes connect.
| What to consider | What should you check? | Who should pay particular attention to this? |
|---|---|---|
| Coverage in the hobby room | Check the signal at the intended intermediate location and in the hobby room; don’t base the number of nodes solely on the stated coverage area. | If I mainly need Wi-Fi in the hobby room, I want to know whether the intermediate node will still have a usable connection there. Around 36% of consumers prioritise coverage in the hobby room. |
| Connection between the nodes | Check whether cabling is an option, whether the exact model supports ethernet backhaul and how the nodes communicate with each other. | If I need a stable connection at the back of the house, I don’t want it to depend solely on a weak wireless signal travelling through the hallway. Around 29% of consumers prioritise the connection between the nodes. |
| Connection to your existing router | Check the router or access point mode you’ve chosen, the available ethernet ports and the setup instructions for the exact model. | If I want to keep using my current router, I want to know in advance how the mesh system connects to it and is managed. Around 21% of consumers prioritise being able to expand easily while keeping their current router. |
| Long-term costs and management | Consider how many nodes you actually need, whether any features require a subscription and which cables or connections you’ll need. | If I want to avoid unnecessary nodes or recurring costs for features, I compare the complete setup with what I’ll actually use. Around 14% of consumers prioritise the overall cost and management. |
Devices connected to the furthest node still depend on the connection between the mesh nodes. Adding another node won’t automatically help if the signal reaching it is already weak.
First check the signal at the intermediate location. If the wireless route through the hallway isn’t good enough, consider ethernet backhaul.
An extra node can mean more equipment without making the connection more usable.
Real-world performance also depends on placement, walls and the connection between the nodes. In a 2024 Tweakers test, performance fell off with more distant wireless Deco X50 satellites; this doesn’t predict how a system will perform in your home.
Compare how the nodes connect to each other, and test in the places where you work or enjoy your hobby.
The right cabling depends on the operating mode and the specific system. TP-Link warns that Deco can create a network loop if connections aren’t made according to the instructions.
Follow the connection diagram for the exact model and chosen mode.
You may need to spend extra time on setup or connect a cable or switch differently.
These brand references relate to specific product ranges and features; the features mentioned won’t, on their own, predict coverage in your home.
The Deco X50 range may be worth considering if you want to compare app-based setup and ethernet backhaul. Check the exact version and number of nodes in the pack.
The ZenWiFi XD5 is worth considering if you want to look at ethernet backhaul and the available settings for network names.
The FRITZ!Repeater 1200 AX and compatible mesh systems may be worth considering if you already have a suitable FRITZ!Box.
The Orbi RBK762 is a tri-band Wi-Fi 6 system worth comparing if the connection between the router and satellite needs to be wireless.
These Joybuy products are mesh systems for extending your connection towards the hobby room. For each version, check the number of nodes, supported backhaul and the ports you need.
No image available
A two-node mesh system for setting up a mesh connection towards your hobby room.
The product description lists tri-band Wi-Fi 7 and wired and wireless backhaul.
The listed ports are 10, 2.5 and 1 Gbps.
No image available
A two-node mesh system to compare if you want to extend coverage towards your hobby room.
The product name lists tri-band Wi-Fi 7 with 2.4 GHz, 5 GHz and 6 GHz bands.
The product description lists AiMesh integration and setup via the ASUS Router app.
No image available
This mesh Wi-Fi system is worth comparing if you want a wired connection between the nodes.
The product description lists Wi-Fi 7, two 2.5 Gbps ethernet ports and support for wired backhaul.
The product description also mentions setup via the ASUS Router app.
No image available
A three-unit system to compare if you want to place multiple nodes along the route through the hallway.
The product name lists dual-band Wi-Fi 5. The product description mentions roaming between Deco units and one wireless network.
The product description mentions setup via the Deco app and help with placement.
No image available
A three-node mesh system to compare for coverage along the route to your hobby room.
The product name lists dual-band Wi-Fi 6. TP-Link lists three gigabit ports per node and optional ethernet backhaul for the standard Deco X50.
The product description mentions setup via the Deco app.
Place the node somewhere it can still get a usable connection to the previous node. Don’t simply put it as close as possible to the hobby room; check the connection in that room afterwards. Without details about walls, power sockets and signal strength, it isn’t possible to guarantee an exact location.
That depends on the operating mode and connections supported by your chosen system. TP-Link provides separate connection instructions for Deco in router and access point modes; check the manual for the exact model and your current router before connecting the nodes by cable.
Allow for electricity to power the active nodes, as well as any cables or extra nodes you may need. Also check whether the features you want require a subscription; Consumentenbond includes energy consumption in its tests, and Tweakers mentioned subscription costs for certain advanced features on the Deco X50 it tested in 2024.
According to the Dutch government, the retailer must provide a solution if there’s a problem. So contact the retailer; a manufacturer’s warranty is separate from your statutory rights.
Radio equipment placed on the market in the European Union must meet the applicable requirements and carry a CE marking, as the Radiocommunications Agency Netherlands states. Check the marking on the product you choose and follow the instructions for use.