Video caller in the back room
Your laptop is at the end of the hallway and you want to check first whether the placement and Wi-Fi coverage, rather than your broadband package, are causing the dropouts.
First, check whether the Wi-Fi in the hallway is the problem or whether your internet connection itself is falling short: a faster broadband package or a mesh system won’t fix a weak connection on its own. If Wi-Fi is the cause, choose a location and connection between the Wi-Fi points that suit your home. Ethernet requires a cable route, while wireless mesh and powerline each have their own installation requirements. Also check that the system works with your existing router and that the version you’re considering carries the CE marking.
Your laptop is at the end of the hallway and you want to check first whether the placement and Wi-Fi coverage, rather than your broadband package, are causing the dropouts.
You can run an Ethernet cable to your workspace or a second Wi-Fi point, and want to make the connection between mesh points less reliant on Wi-Fi through the hallway.
You can’t install Ethernet and want to weigh up whether wireless mesh will be enough or a compatible powerline mesh system would suit your home.
Choose this when: you can’t run a cable through the hallway and can place an extra point somewhere it can still connect well to the network.
Trade-off: distance and obstacles can weaken both the connection between the points and the connection to your laptop.
Choose this when: you can use an Ethernet cable between compatible Wi-Fi points and want to avoid a wireless connection between them.
Trade-off: you’ll need a cable route or existing connections. The furthest point still needs to be well placed in relation to your laptop.
Choose this when: installing Ethernet is difficult and your chosen mesh points can connect over powerline, subject to the relevant electrical wiring requirements.
Trade-off: powerline backhaul doesn’t work with every mesh system or combination of models. After installation, check that the connection is working.
| What to consider | What to look for | Who should pay particular attention? |
|---|---|---|
| Coverage and placement | Test the Wi-Fi at your workspace and try a suitable location for your modem or Wi-Fi point before deciding how many points you need. | I want to check first whether my laptop still gets usable coverage at the end of the hallway; around 36% of consumers prioritise coverage and placement. |
| Connection between points | Check that the exact model supports Ethernet backhaul and that you have a cable route and suitable connections. | If I can run a cable between the points, I want to know whether that connection will work with my setup; around 29% of consumers prioritise the connection between Wi-Fi points. |
| Installation without Ethernet | Check how the system works with your existing router and whether your chosen powerline models are compatible. | Without a cable route, I’m looking for a setup that will work in my home; around 21% of consumers prioritise installation without running new network cable. |
| Purchase and running costs | After testing the coverage, work out how many points you need and allow for any cabling and the stated power consumption. | I want to know what complete setup I need, not just which Wi-Fi version is printed on the box; around 14% of consumers prioritise the overall purchase and running costs. |
A Wi-Fi point also needs a usable connection to the network. If that connection is weak, placing it next to your laptop won’t solve the problem on its own.
Try different locations and check the connection at your workspace before deciding how many points you need.
TP-Link distinguishes between models and powerline technologies. For example, Deco PX10 and PX50 can’t form a powerline backhaul with each other.
Check the full model names and, after installation, make sure the intended backhaul connection is actually working.
Distance, obstacles and the layout all affect the connection. A speed or coverage claim alone won’t tell you how Wi-Fi will perform at your workspace.
Assess the connection between the points and test the Wi-Fi where you make video calls.
The Deco X50 and PX10 offer different approaches to mesh Wi-Fi: the X50 can use Ethernet backhaul, while the PX10 has powerline backhaul.
The ZenWiFi XD5 is a Wi-Fi 6 mesh option for anyone comparing two- or three-point systems with Ethernet backhaul.
The WiFi 7 Mesh BE6500 is an option if you’re considering a Wi-Fi 7 system with several Ethernet ports.
According to eero, eero 7 is a dual-band Wi-Fi 7 mesh router that can serve as a main router or extend an existing eero network.
These mesh Wi-Fi options are for anyone looking to improve Wi-Fi at a workspace further inside the home. Before buying, check that the system works with your existing router and that the version on offer carries the correct CE marking; the Dutch Authority for Digital Infrastructure outlines this requirement for radio equipment.
No image available
Suitable if you’re considering a mesh system with two points and a wired or wireless connection between them.
The product description mentions setup using the Deco app and a shared network.
No image available
Suitable if you’re looking for a three-point system to provide Wi-Fi in several rooms.
The product description lists dual-band Wi-Fi 5 at 2.4 and 5 GHz, and two network ports per unit.
No image available
Suitable if you’re considering a mesh system with two points and a tri-band setup.
The title lists Wi-Fi 7 and tri-band at 2.4, 5 and 6 GHz; the product description mentions AiMesh compatibility.
No image available
Suitable if you’re looking for two mesh points and can run a cable between them.
The product description lists Wi-Fi 6 and optional Ethernet backhaul between the Deco units.
No image available
Suitable if you’re considering three connected mesh points and want to test the connection at your workspace.
The product description lists dual-band Wi-Fi 5 at 2.4 and 5 GHz, and a maximum speed of 1200 Mbps.
Not before checking the cause. Compare the connection on a computer plugged in with a cable against the Wi-Fi at your workspace: a weak Wi-Fi signal and a slow internet connection call for different solutions.
Try a spot where the point itself can still connect well to the network, then test the Wi-Fi at the end of the hallway. Distance, walls and the modem’s location all affect the connection, so check the final position in your own home.
Check the exact models before combining them. According to TP-Link, PX10, P9 and P7 can form a powerline backhaul with each other, but the PX50 uses a different powerline standard. A general Deco mesh connection doesn’t automatically mean powerline backhaul will work between models.
Before buying, check the CE marking on the version on offer; the Dutch Authority for Digital Infrastructure describes the marking as compulsory for the relevant equipment. For consumer purchases in the Netherlands, statutory warranty rights apply alongside any manufacturer’s warranty. According to ACM ConsuWijzer, statutory warranty has no fixed two-year term, and the retailer is your point of contact.
According to the Dutch Authority for Digital Infrastructure, you can use Wi-Fi frequencies designated for permit-free use without a permit, notification or registration, subject to the applicable conditions. This doesn’t remove the conditions of use or the requirements for radio equipment.