Who is this choice relevant to?

For readers with a weak signal in their garden office

You want to download digital magazines and first need to check whether a wireless mesh node will still connect reliably to your home network from the intended location. The questions around signal strength and placement reflect buying advice from the Consumers’ Association and model information from TP-Link.

For readers who can run a network cable

You can connect your garden office by cable and are looking for a suitable access point for your phone, tablet or laptop. For example, FRITZ! describes connecting the FRITZ!Repeater 3000 AX to a FRITZ!Box via LAN.

For readers who need to install an access point outdoors

You have a mounting spot in the garden or on an outside wall, so you’ll need to check that the exact model is suitable for outdoor use, as well as its power requirements and compatibility. TP-Link and ASUS provide information about their specific Outdoor models.

What should you look for?

First, check the connection at the intended location, then work out whether running a cable is practical. Where you plan to install the equipment and whether it’s compatible with your existing network will determine which type of extension you can consider.

What to consider What should you check? Who is this important to?
Connection between your home and garden office Test the connection at the intended location. Compare wireless placement with an Ethernet connection before choosing additional mesh nodes. If I want to avoid downloads cutting out because the access point itself has a weak connection, signal strength is my top priority. Around 36% of consumers put the connection between home and garden office first.
Whether to run a cable Check whether running a cable is practical and whether the model you choose supports the connection and network setup you need. If I can run a cable to the garden office, I want to know whether a wired access point will work there. Without a cable, I’m looking for a spot with a strong enough wireless signal. Around 29% of consumers prioritise the connection method.
Suitability of the installation location Decide whether the device will be indoors or outdoors. For outdoor installation, check the exact model’s outdoor specifications, power requirements and installation instructions. If my access point needs to be installed outdoors, I want a model designed for that purpose that I can connect according to the instructions. Around 21% of consumers name outdoor installation as their top priority.
Compatibility and expansion Make a note of the exact router and mesh model. Check which combinations are supported, and what connections and power supply your chosen setup requires. If I want to expand my existing network rather than replace equipment unnecessarily, I want to know in advance whether the extra equipment will work with it. Around 14% of consumers prioritise expanding their system and avoiding unnecessary replacements.

What to watch out for

  • Buying an extra mesh node without testing the location

    The node itself still needs to connect reliably to your existing network. An extra node won’t automatically fix a weak wireless connection at the intended location.

    Test the connection there. If the signal is weak, find out whether an Ethernet connection is practical.

    A different node or a wired connection after all could mean extra installation work.

  • Installing an indoor unit outdoors without protection

    Not every access point is automatically suitable for outdoor use. TP-Link and ASUS specify their named Outdoor models for outdoor use; that doesn’t mean other models are suitable for unprotected outdoor installation.

    For outdoor use, choose a model specified for that purpose and follow the instructions for power, mounting and connections.

    Choosing an unsuitable model could mean replacing your setup or installing it all over again.

  • Assuming every product labelled ‘mesh’ will work with your network

    Manufacturers describe mesh compatibility for specific product families and combinations. The word on the packaging doesn’t prove that a product is compatible with every existing system.

    Check the model numbers of your router and mesh nodes, and find out which combinations are supported for the network setup you want.

    The wrong combination could mean you need a different node or have to reconfigure your network.

Brands to consider

TP-Link

The Deco range may be worth considering if you want to expand an existing Deco network. TP-Link specifies the Deco X50-Outdoor for outdoor use.

  • TP-Link says the Deco X50-Outdoor has an IP65-rated enclosure and can be powered via PoE or a mains adapter. TP-Link also lists compatibility with other Deco models.
  • For a wireless connection, TP-Link recommends keeping the unit within a certain distance of the previous Deco. That same distance limitation doesn’t apply in the same way when using a wired connection. The standard Deco X50 isn’t an outdoor unit.

ASUS

The ZenWiFi BD4 Outdoor is an option to look into if you need an outdoor unit and have a compatible ASUS AiMesh network.

  • ASUS specifies an IP65-rated enclosure, PoE and two 2.5G ports for this model.
  • Check that your existing ASUS router works with the exact model. The stated Wi-Fi speeds don’t, by themselves, predict how quickly you’ll be able to download content in a garden office.

FRITZ!

The FRITZ!Repeater 3000 AX may suit an existing FRITZ! network and a suitable indoor setup, particularly if you can run a LAN cable to your garden office.

  • FRITZ! describes mesh compatibility with a FRITZ!Box and connecting this repeater via LAN.
  • The product information doesn’t support installing the FRITZ!Repeater 3000 AX outdoors without protection.

devolo

The WiFi 6 Repeater 5400 is an indoor option to consider if you want to extend your existing Wi-Fi setup.

  • devolo lists mesh compatibility with other devolo Wi-Fi products and use with routers via WPS.
  • Check in advance that your existing equipment supports the mesh or access point setup you want. The product information provided doesn’t support outdoor installation.

Joybuy products for mesh Wi-Fi

These products are designed to extend mesh Wi-Fi or provide a wired indoor access point. Before choosing a model, check compatibility and your intended installation location. The product names alone are no reason to assume a model is suitable for outdoor use.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-pack

Worth considering if you want to expand a Deco mesh setup. Check that this exact version works with your existing network.

Pack contains 2 units.

Joybuy
ASUS ZenWiFi BT8 tri-band Wi-Fi 7 mesh system, 2-pack

ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

May suit you if you want to expand an existing ASUS AiMesh network. Check that the exact combination is supported by your router.

Tri-band Wi-Fi 7 (2.4 GHz, 5 GHz and 6 GHz); pack contains 2 units.

The product information warns against exposure to water, moisture and extreme temperatures. Don’t assume it’s suitable for outdoor installation.

Joybuy
ASUS RT-AX52 AX1800 AiMesh dual-band router

ASUS RT-AX52 AX1800 AiMesh router

Worth considering for a network with compatible ASUS AiMesh equipment. Check how this model will fit into your existing network setup.

Wi-Fi 6 (802.11ax), dual-band (2.4 GHz and 5 GHz) and Gigabit Ethernet, as stated in the product name.

The product information states that this model is for indoor use only.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

May suit you if you want to set up a mesh network across several rooms. Before buying, check that the extension you want will work with your existing equipment.

Dual-band Wi-Fi 7, as stated in the product name.

Joybuy
TP-Link Omada EAP653 Wi-Fi 6 access point with PoE

TP-Link Omada EAP653 access point

Worth considering if you can run a network cable to a fixed indoor location. Check that this access point suits the network setup you want to use.

Wi-Fi 6 access point with Power over Ethernet (PoE), as stated in the product name.

Joybuy

Frequently asked questions

Does a mesh node in a garden office always need to be weatherproof?

No, it depends on where you install it. For a unit exposed to the elements, check its explicit outdoor specifications and installation instructions. Indoors, the main consideration is the connection back to your home. TP-Link and ASUS specify their named Outdoor models for outdoor use.

How do I decide where to put a wireless outdoor node?

Check both the connection to the previous node and the signal strength where you plan to use your device. For a Deco X50-Outdoor connected wirelessly, TP-Link recommends placing it no more than 10 metres from the previous Deco, and no further than 15 metres; this is manufacturer guidance for a specific model, not a general rule for mesh networks.

Will Wi-Fi 7 automatically make downloading magazines faster?

No, not just because of the Wi-Fi version. The Consumers’ Association considers Wi-Fi 6 a good choice for most people. Also check the connection where you’ll be using your device and whether your devices support the relevant Wi-Fi version.

What else should I check about installation and the warranty?

Check whether your chosen setup needs an extra mesh node, a network cable or a suitable PoE power supply, and what’s included. When you buy as a consumer in the Netherlands, you’re entitled to a product that works properly. The Dutch government says you should contact the seller first if there’s a problem.

Do I need a permit or registration for standard Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used without a permit as long as the equipment complies with the designated frequencies and conditions of use. The authority says there’s no notification or registration requirement for licence-exempt frequency use. This doesn’t mean you can use arbitrary channel, power or outdoor settings.