Who is mesh Wi-Fi suitable for?

Gamer on an upper floor

Wants to download large updates on a floor where the connection to the current router is weak. ACM ConsuWijzer advises checking internet speed over a wired connection, close to the connection point; the Consumers’ Association highlights the importance of where you place your Wi-Fi points.

Resident with network cables between floors

Can connect mesh points by cable and wants to know which ethernet ports are suitable for the connections and their console or PC. Manufacturers describe ethernet backhaul for products including the TP-Link Deco X50 and ASUS ZenWiFi XD5.

Resident without cable runs

Needs to connect mesh points wirelessly and wants to position them so the connection between points remains usable. The Consumers’ Association advises keeping obstacles between Wi-Fi points to a minimum.

What should you look for when choosing?

Mesh points with ethernet backhaul

Choose this if: there are usable network cables between floors and you can connect the mesh points by cable.

Bear in mind: you’ll need cables and suitable ports on the points you choose; a wired mesh connection won’t automatically increase your internet speed.

Wirelessly connected mesh points

Choose this if: there are no cables between floors and Wi-Fi coverage where you play is inadequate.

Bear in mind: floors and obstacles can weaken the connection between points. Position each point where it can still receive a usable signal.

Check your connection or existing Wi-Fi first

Choose this if: a wired speed test at the connection point already gives disappointing results, or repositioning your existing router provides enough coverage throughout your home.

Bear in mind: buying a mesh system may not solve a problem with your incoming internet connection.

First compare a wired speed test at the connection point with one where you play. Then decide whether the connection between mesh points will be wired or wireless.

What to consider What should you look for when buying? Who is this important for?
Coverage on the floor where you play Check how many points are included in the set and measure where you could place them. Treat the stated square-metre coverage as a manufacturer’s claim, not a guarantee of coverage across three floors. If I game on the top floor, I want to know whether a point there will still have a good connection. Around 36% of consumers are most concerned about coverage on the floor where they play.
Connection between mesh points Check whether ethernet is available in the intended locations and whether the exact set supports ethernet backhaul. If there are cables between floors, I want to know whether I can connect the points by cable; without cables, the wireless connection is key. Around 29% of consumers prioritise the connection between points.
Download speed and ports Run a wired speed test at the connection point and check the ports on the exact mesh model and on your console or PC. If a game update is slow, I first want to find out whether the connection, Wi-Fi route or a port is the bottleneck. Around 21% of consumers focus mainly on actual download speed and connections.
Cost, management and lifespan Check whether the number of points suits your home and find out how updates and network management work. If I want to avoid buying unnecessary points, I also consider how the system is managed after installation. Around 14% of consumers are most concerned about overall costs and maintenance.

Common mistakes

  • Assuming a stated coverage area in square metres guarantees fast Wi-Fi through three floors

    Manufacturers publish coverage figures, but the connection between points and obstacles in your home affect where a point will work well. That’s why the Consumers’ Association advises taking obstacles and placement into account.

    Work out possible locations based on your home and your own measurements, not just the stated floor area.

  • Assuming a high Wi-Fi or combined speed is the same as the speed of a single game download

    Download speed can also be limited by your incoming internet connection, the route between mesh points or the device you’re using.

    Compare a wired speed test at the connection point with one where you play, and check the ports on the exact model.

  • Treating different Deco X50 models as if they were the same

    TP-Link lists three gigabit ports per unit and optional ethernet backhaul for the standard Deco X50. The separate X50-PoE model has PoE and two 2.5Gbps ports, according to the manufacturer; these features are not included on the standard X50.

    Compare the full model name, number of points, ports and power supply for the exact model.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system with ethernet backhaul; the X50-PoE is a separate model for a suitable PoE installation.

  • TP-Link lists three gigabit ports per unit and optional ethernet backhaul for the standard Deco X50.
  • The ports and power supply on the X50-PoE do not automatically apply to the standard X50. Coverage figures are manufacturer claims, not measurements taken in your home.

ASUS

The ZenWiFi XD5 can be set up for ethernet backhaul if suitable connections are available between floors.

  • ASUS says ethernet backhaul keeps the Wi-Fi bands free for wireless devices.
  • According to ASUS, 160 MHz support on 5 GHz may vary by region. Check the exact model and don’t assume a guaranteed download speed.

FRITZ!

The FRITZ!Mesh Wi-Fi Set 1600 contains three repeaters to extend an existing network; the FRITZ!Repeater 1700 is a separate option that can be connected by cable.

  • FRITZ! lists three FRITZ!Repeater 1200 AX units in the Set 1600. For the separate Repeater 1700, FRITZ! lists one gigabit LAN connection and connection to a router via LAN.
  • The Repeater 1700’s specifications do not automatically apply to the Set 1600.

Joybuy products

These three-point mesh systems are options to consider when planning coverage across several floors. Before buying, check that the exact model suits your cabling, ports and applicable product requirements.

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) dual-band Wi-Fi 6

Suitable for a home that needs several mesh points across different floors and has ethernet backhaul available.

Three-piece set; Wi-Fi 6 (802.11ax); three gigabit ports per unit and optional ethernet backhaul, according to TP-Link.

Check the applicable product requirements and documentation for the exact model.

View at Joybuy
TP-Link Deco S7 (3-pack), dual-band Wi-Fi 5

TP-Link Deco S7 (3-pack) dual-band Wi-Fi 5

A three-point set for placing around your home. Check beforehand how the points connect to each other and to wired devices.

Wi-Fi 5 (802.11ac); three ethernet ports per unit, according to the product information.

Check the applicable product requirements and documentation for the exact model.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack) tri-band Wi-Fi 6E

A three-point mesh system for placing around your home. Check that its features and connections suit your devices and network.

Tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax); three ethernet ports per unit, according to the product information.

Check the applicable product requirements and documentation for the exact model.

View at Joybuy
TP-Link Deco XE75 (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 (3-pack) tri-band Wi-Fi 6E

The three-point set can be placed around your home. Check that the ports and wireless features are compatible with your equipment.

Tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax); three gigabit ports per unit, according to the product information.

Check the applicable product requirements and documentation for the exact model.

View at Joybuy
TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (3-pack) dual-band Wi-Fi 6

Suitable for an installation that needs three mesh points and has ethernet cabling and power suitable for PoE.

Wi-Fi 6 (802.11ax); PoE support and two ethernet ports per unit, according to the product information.

Check the applicable product requirements and documentation for the exact model.

View at Joybuy

Frequently asked questions

How can I tell whether mesh will speed up my game update?

First, run a wired speed test close to the connection point, following ACM ConsuWijzer’s testing advice. If the connection is already slow there, look into your connection or broadband package. If it’s only slow on the floor where you play, check the Wi-Fi route and where the points are positioned.

Where should I place a wireless mesh point?

Don’t automatically put it where coverage is worst: the point itself still needs a usable connection to the previous one. The Consumers’ Association advises keeping obstacles to a minimum and suggests a central position if the signal is weak further into your home.

Do I need to maintain a mesh system?

Yes. Keep your router and Wi-Fi devices up to date, and protect your network with a strong password. The Consumers’ Association also recommends using a guest network as a security measure.

Do I need a licence or registration for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi uses licence-exempt frequencies and does not need to be reported or registered. Radio equipment placed on the market must still meet the applicable product requirements; the manufacturer applies the CE marking when the equipment meets all requirements.