Who is this choice relevant to?

Gamer upstairs

Wants to avoid interruptions while gaming, so looks at the connection between mesh points and whether there’s an Ethernet port for the PC or console.

Loft user with weak Wi-Fi

Wants Wi-Fi in a converted loft room too. The position of the intermediate point and the connection between floors matter more than the claimed coverage area alone.

Household keeping its existing router

Wants to keep the current modem or router and needs to check how a mesh system connects to it and is managed.

What should you look for in mesh Wi-Fi?

First, find out how the mesh points communicate with each other. Then consider where to place them, which ports are available and how the system connects to your existing router.

What to consider What to look for Who is this most relevant to?
Stability while gaming Check for Ethernet backhaul and how many ports remain free for your PC or console once the backhaul is connected. If I need a stable connection while gaming, I look at the cable route and a wired connection upstairs. Around 26% of consumers put gaming stability first.
Wi-Fi in the loft Test where to position the intermediate point and check the signal in the loft room; a claimed coverage area doesn’t predict how well Wi-Fi will pass through floors. If you mainly need Wi-Fi in a converted loft room, pay attention to the connection from the intermediate point. Around 26% of consumers give loft coverage their top priority.
Cable route See where an Ethernet cable could run and check the connections required by the system. If the option to run cables between floors will determine my choice, I want to know whether it’s practical to install one. Around 21% of consumers say the cable route is their main priority.
Existing router Check the installation guide, operating mode and compatibility with your current router or provider system. If I want to keep my modem-router, I check how the mesh system connects to it and which device manages the network. Keeping the existing router is the top priority for around 16% of consumers.
Purchase and running costs Compare how many points you need, check power consumption and look for any paid features included with particular versions. If you want to avoid unnecessary purchase and running costs, first work out how many points and features you actually need. Around 11% of consumers say total running costs are their main consideration.

Common buying mistakes

  • Putting a mesh point in the loft and nowhere else

    A wireless mesh point also needs a usable connection to the rest of the network. If the incoming signal is weak where you place it, that won’t automatically solve your Wi-Fi coverage in the loft.

    Try an intermediate location using the system’s placement assistant, then check the connection in the loft. Compare this with Ethernet backhaul if you can run a cable.

  • Assuming a high Wi-Fi rating or coverage figure guarantees low ping

    Wi-Fi generation, your home’s layout and the connection between mesh points are all separate factors. The Consumers’ Association notes that the Wi-Fi version alone doesn’t determine performance.

    Choose your backhaul and placement first. Then check which Wi-Fi features and ports your devices can actually use.

  • Assuming every mesh product will extend your current system

    A system connected behind a router from another brand may create its own mesh network. Google also states that Nest Wifi Pro isn’t compatible with earlier Nest Wifi or Google Wifi versions.

    Check the exact model, system size and installation guide for your existing router and mesh points.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 option with three gigabit ports per unit; the Deco XE75 is a separate tri-band Wi-Fi 6E option.

  • According to TP-Link, Deco supports Ethernet backhaul, allowing the units to communicate via a cable.
  • The X50’s port layout doesn’t automatically apply to the XE75. Claimed Wi-Fi speeds or coverage aren’t the same as measured gaming performance in a loft.

ASUS

ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system with two 2.5G WAN/LAN ports per unit and access point mode.

  • The ports and available modes are specifications for the BD4 model.
  • If you connect backhaul and several wired gaming devices, check how many ports will remain available. Wi-Fi 7 alone doesn’t prove that you’ll get better performance in your home.

FRITZ!

The FRITZ!Mesh Set 1700 is an expandable option for anyone who may want to keep their existing router.

  • The installation guide says the system can also be used behind a router from another brand.
  • In this setup, a repeater from the system takes on the role of Mesh Master. Check the exact system designation and how many units you need.

KPN

SuperWifi is a provider-specific option for anyone looking to extend an existing KPN home network.

  • KPN describes installation and management via MijnKPN.
  • Check your modem type and how the system connects; don’t assume it will work with a mesh system from another brand without checking compatibility.

Google

Nest Wifi Pro is a Wi-Fi 6E option for anyone looking to add Nest Wifi Pro points while keeping their existing modem.

  • Google describes Nest Wifi Pro as a system that can be expanded with Nest Wifi Pro points.
  • According to Google, Nest Wifi Pro isn’t compatible with earlier Nest Wifi or Google Wifi versions. The claimed coverage per router doesn’t guarantee a signal through a floor into the loft.

Mesh systems at Joybuy

This selection includes mesh systems for providing Wi-Fi in several areas, including models that support wired backhaul. Check the ports, placement options and suitability for your setup for each system.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack)

This three-unit system may suit you if you want to extend Wi-Fi to several areas; check that the port speed meets the needs of your wired devices.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz); two Ethernet ports per unit, with a stated maximum of 100 Mbps.

Before buying, check that the specific product carries the required CE marking.

View at Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4

This system may suit you if you want to connect mesh points by cable and also connect a gaming device upstairs via Ethernet.

Dual-band Wi-Fi 7 (2.4 GHz and 5 GHz); wired backhaul; two 2.5G Ethernet ports per unit.

Check how many ports will remain free when you connect the backhaul and a gaming device. Before buying, also check that the specific product carries the required CE marking.

View at Joybuy
TP-Link Deco X20, Wi-Fi 6 mesh system with 2 units

TP-Link Deco X20 (2-pack)

An option to compare if you’re looking for a two-point system that supports wired backhaul.

Wi-Fi 6; mesh system with two units; Ethernet backhaul is listed for the Deco X20 system.

Before buying, check that the specific product carries the required CE marking.

View at Joybuy
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack)

This three-unit system may suit you if you want Wi-Fi in several areas; the Deco app is described as helping you find a suitable position.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz); two Ethernet ports per unit.

Before buying, check that the specific product carries the required CE marking.

View at Joybuy
TP-Link Deco X50 (3-pack), Wi-Fi 6

TP-Link Deco X50 (3-pack)

This three-unit system may suit you if you want to cover several areas and are considering wired backhaul.

Wi-Fi 6; three Ethernet ports per unit; TP-Link says Ethernet backhaul is supported for Deco units.

Before buying, check that the specific product carries the required CE marking.

View at Joybuy

Frequently asked questions

Does the mesh point need to be in the loft?

Not necessarily. With wireless mesh, the point itself still needs a good connection to the network. Use the placement assistant, then check coverage in the loft. If you run a cable between the points, placement is less dependent on that wireless connection.

Can I keep my existing modem-router?

That depends on the system and how it connects. For example, FRITZ! describes installing the Mesh Set 1700 behind a router from another brand, with a repeater from the system becoming the Mesh Master. This doesn’t automatically mean the existing router is part of that mesh.

Which costs and support should I check?

Check how many points you need, power consumption, available security updates and the terms for any extra features. The Consumers’ Association includes energy use and security in its tests; check the costs and features for the specific version you’re considering.

Do I need a permit or registration to use Wi-Fi at home in the Netherlands?

According to the Netherlands Authority for Digital Infrastructure, you don’t need a permit, notification or registration to use Wi-Fi on licence-exempt frequencies, although the conditions of use still apply. Radio equipment sold in the Netherlands must also meet the relevant European requirements and carry a CE marking. Check the specific product and follow the instructions for use.