Watching from different floors
You want to watch the concert somewhere other than the room with the modem. Where you place extra Wi-Fi nodes may matter more than the router’s advertised speed alone.
First, measure your internet speed by the modem and in the places where you want to watch the concert. A faster router alone won’t fix a weak signal on another floor. If you have ethernet cables, consider wired access points or mesh with ethernet backhaul. Without cables, an expandable mesh system could be a good fit, provided the nodes have a usable connection where you place them. Also check how it connects to your modem and whether the specific model carries the CE mark.
You want to watch the concert somewhere other than the room with the modem. Where you place extra Wi-Fi nodes may matter more than the router’s advertised speed alone.
You have ethernet between floors and need connections for Wi-Fi nodes or the screen you’ll be watching on.
Several screens or other devices use the connection at once. You want the speed where you watch to meet the requirements of your streaming service.
First, measure the speed by the modem and where you plan to watch. Then check whether existing ethernet cables can provide the connection between floors.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Coverage across all floors | Measure the speed where you plan to watch, and check whether you can move or add Wi-Fi nodes. The advertised coverage won’t replace testing in your own home. | If I watch on another floor, I want usable Wi-Fi there too. Around 36% of consumers making this choice put coverage across multiple floors first. |
| Connection between nodes | Check whether ethernet runs to the floors, whether the system supports ethernet backhaul and which LAN ports will remain available. | For a live broadcast, I want to know how the Wi-Fi nodes connect to the modem, not just how strong the signal is by the screen. Around 29% of consumers prioritise the connection between nodes. |
| Speed when several devices are in use | Measure the speed on your viewing device while the network is being used as usual, and check the concert service’s speed requirements. | If several people are streaming or online at once, I want to know what speed reaches my screen. Around 21% of consumers focus mainly on speed where they watch and simultaneous use. |
| Existing equipment and connection | Check whether the system can work with your current modem, which operating modes are available and what’s included in the box. | I want to keep using my current equipment if possible, and avoid choosing a system that isn’t compatible with my connection. Around 14% of consumers put cost and compatibility first. |
A router’s Wi-Fi specification isn’t the same as the speed your streaming service receives on screen. For example, Netflix recommends 15 Mbps or higher for its own 4K UHD streams; that isn’t automatically the requirement for a concert service.
Measure the speed on the device you’ll watch on, in the place where you plan to follow the broadcast, and check the requirements of the service you’re using.
A node also needs to connect to the rest of the network. Placing one somewhere with no usable signal won’t automatically fix the weak connection.
Try different positions, and use existing ethernet cables if your chosen system supports ethernet backhaul.
If the wireless connection between nodes isn’t usable, you may need an extra node or cabling.
TP-Link describes these as different models, with different connections and placement options. The standard Deco X50 and the X50-PoE aren’t interchangeable just because both have X50 in the model name.
Check the full model name, version, power supply and connections of the system you’re considering.
The Dutch Authority for Digital Infrastructure states that equipment requiring CE marking must carry the mark. A similar model variant doesn’t confirm which mark is on the specific version you’re buying.
Check the mark on the device and follow the installation instructions. Make sure you also use the correct country settings.
The Deco X50 range includes mesh models with router and access point modes. The separate X50-PoE version is another option if powering the nodes over ethernet is useful.
FRITZ! describes mesh systems with repeaters that you can add to an existing router.
SuperWifi could be an option if you already use KPN Internet and want help with installation.
Magic 2 WiFi 6 next uses powerline technology over your home’s electrical wiring, with Wi-Fi adapters as an alternative when you don’t have ethernet.
This selection features wireless mesh systems for spreading Wi-Fi across multiple rooms or floors. Before buying, check the connection to your current modem and the CE mark on the specific version.
Image unavailable
A wireless mesh option if you want to spread Wi-Fi across several areas and HD streaming is enough for your needs.
Dual-band on 2.4 GHz and 5 GHz; Wi-Fi 5 (802.11ac). The system is described as having three units and supporting HD streaming.
Image unavailable
A suitable mesh option if you want to spread Wi-Fi across several floors and may be able to use existing ethernet cables to connect the nodes.
Dual-band on 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax). TP-Link lists three gigabit ports per node and optional ethernet backhaul.
Image unavailable
A mesh system for spreading Wi-Fi across several areas. Check that the available connections are suitable for your modem and any wired devices.
Tri-band on 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 6E (802.11ax). Each node is listed with two gigabit ports and one 2.5GbE port.
Image unavailable
A mesh option for multiple floors if you want to power the nodes over ethernet. This is the X50-PoE version, not the standard Deco X50.
Dual-band on 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax). This version lists PoE support and two ethernet ports per node.
Not necessarily. First, measure the speed by the modem and at each place you plan to watch. According to TP-Link, the Deco X50 has an access point mode. Check the settings for your modem and the exact system before choosing.
Don’t put a node only where Wi-Fi already drops out: it also needs to connect to the rest of the network. Test the speed where you plan to watch; the Consumers’ Association recommends using the installation app to decide where to place the nodes.
Check what’s included in the system, whether you’ll need ethernet cabling or extra Wi-Fi nodes, and what warranty and update terms apply. With KPN, it also matters whether you rent or buy: according to KPN, rented SuperWifi nodes only work with KPN Internet.
According to the Dutch Authority for Digital Infrastructure, you don’t need a permit for home Wi-Fi on the designated frequencies as long as you follow the terms of use. Use the correct country settings; incorrect settings can cause interference.
The Dutch Authority for Digital Infrastructure states that equipment subject to CE marking, including Wi-Fi routers, must carry the correct CE mark. Check the mark on the specific version; the model name alone doesn’t confirm which version you’ll receive.