Who is mesh Wi-Fi suitable for?

Watching films somewhere with a weak signal

You want a reliable connection for your TV or laptop, so you’re particularly interested in where to place the Wi-Fi nodes and how many you’ll need.

Housemates who are online at the same time

You want to stream while others use the internet, so you’re comparing the connection between mesh nodes with the capabilities of your own devices.

Keeping your existing router

You’re looking for a mesh setup to use alongside the shared router and want to agree in advance who will install and manage it.

What should you consider when choosing?

First, check whether the problem is with Wi-Fi where you watch or with the internet connection itself. Then consider whether a well-placed extra node will be enough, or whether a wired connection between nodes or keeping your existing router is more important.

Concern What to check Who is this most important to?
Coverage where you watch Test the connection by the TV and compare the number of nodes and where they’re placed. If the Wi-Fi is weak in my film room, I want to know whether a node there can still get a usable connection to the rest of the network. Around 36% of consumers are most concerned about coverage where they watch.
Streaming and browsing at the same time Test the connection at a busy time and check which Wi-Fi bands your devices support. If my housemates are online while I’m watching, I want to check that the connection between mesh nodes and my devices can handle this situation. Around 29% of consumers prioritise simultaneous use.
Existing router and management Check how the system connects to your current router and agree who will manage it. If I want to keep the shared router, I want to know in advance how the mesh system will work with it and who will manage the settings. Around 21% of consumers give keeping their existing router top priority.
Use and support Compare the number of nodes you need, update information, warranty terms and the specific model. For long-term use, I don’t want to choose more nodes or features than my situation calls for, and I want to know what support is available. Around 14% of consumers give the most weight to use and support.

Common pitfalls

  • Mistaking combined Wi-Fi speeds for streaming speed

    The stated speeds for each band don’t tell you what connection you’ll get where you watch or on your playback device.

    Test the connection where you watch and don’t base your choice solely on the highest advertised Gbps figure.

  • Placing an extra node where the signal is already weak

    A mesh node needs a usable connection to the rest of the network itself; simply adding another node won’t automatically solve the problem.

    Check the connection between nodes after installation and see whether you can use any existing Ethernet cabling.

  • Assuming you need 6 GHz or Wi-Fi 7 to watch one film

    A newer generation of Wi-Fi won’t automatically solve every problem, and your devices also need to support the relevant features.

    Choose these features only if your devices and the issue you’ve identified make them worthwhile.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 option; TP-Link describes the Deco XE75 as a tri-band Wi-Fi 6E option. Compare the exact pack size and model with the rooms and devices in your home.

  • TP-Link says Ethernet backhaul can be used to connect compatible Deco nodes by cable.
  • Advertised coverage and speed figures aren’t a measure of the connection in a shared home.

FRITZ!

The two-piece FRITZ!Mesh Set 1700 is worth considering if residents want to keep their existing router and connect a mesh system via LAN.

  • FRITZ! lists guest access, automatic updates and a five-year manufacturer’s warranty for this set.
  • The stated Wi-Fi speed doesn’t tell you what speed you’ll get where you watch. Also check who will manage the installation and router settings.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 option with two 5GHz bands. Compare the exact model with other tri-band options.

  • The Dutch specifications list versions with one or two devices.
  • ASUS warns that 160 MHz on 5 GHz may not be available in some countries or regions. The specifications don’t predict how the connection will perform in your home.

Joybuy products

This selection includes dual-band and tri-band mesh systems for homes with multiple rooms or simultaneous network use. Compare the number of nodes, Wi-Fi generation and connection options with your own devices and router. The Dutch Authority for Digital Infrastructure (RDI) states that radio equipment must meet the applicable European requirements. Since 1 August 2025, applicable RED 3.3 cybersecurity requirements have also applied to internet-connected radio equipment. Which requirements apply depends on the device, so check the specific model and relevant requirements before buying.

ASUS ZenWiFi BT8 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack) tri-band Wi-Fi 7

A good fit if you’re comparing a mesh system with three Wi-Fi bands for use across multiple rooms.

2-pack; tri-band on 2.4, 5 and 6 GHz; Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) dual-band Wi-Fi 6

A good fit if you’re looking for a mesh system with several nodes and want to consider wired connections between them.

3-pack; dual-band on 2.4 and 5 GHz; Wi-Fi 6 (802.11ax).

View at Joybuy
ASUS ZenWiFi BT10 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT10 (2-pack) tri-band Wi-Fi 7

A good fit if you’re comparing a tri-band Wi-Fi 7 mesh system for use with several active devices.

2-pack; tri-band on 2.4, 5 and 6 GHz; Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50-PoE 2-pack dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack) dual-band Wi-Fi 6

A good fit if you’re comparing a PoE mesh system and can plan the installation using Ethernet.

2-pack; dual-band on 2.4 and 5 GHz; Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E

TP-Link Deco XE75 tri-band Wi-Fi 6E

A good fit if you’re comparing tri-band mesh and want to check that your connected devices support the available bands.

Tri-band on 2.4, 5 and 6 GHz; Wi-Fi 6E (802.11ax).

View at Joybuy

Frequently asked questions

How can you tell whether mesh will stop a film from buffering?

Compare the connection on your playback device with the connection nearer the router. Netflix recommends a stable speed of at least 15 Mbps for one UHD/4K stream; this isn’t a guarantee for other services, devices or simultaneous streams. If the incoming internet connection itself is too slow, extra Wi-Fi coverage won’t fix it.

How do you connect Deco nodes using a network cable?

The right connection depends on the Deco mode you’ve chosen. According to TP-Link, in router mode a wired satellite node must connect to the LAN side of the main node. TP-Link describes different connection options for access point mode. Check the instructions for your model and configuration.

Do you need to replace your internet provider’s router to use mesh?

No, not always. ACM ConsuWijzer says you can choose your own router and can also continue using your provider’s router; just check how your chosen system connects. The manufacturer says the two-piece FRITZ!Mesh Set 1700 can be used via LAN alongside an existing router.

What about updates and the warranty?

Check how the manufacturer provides updates and keep your proof of purchase. According to ACM ConsuWijzer, the retailer remains responsible for the statutory guarantee if a product is faulty; a manufacturer’s warranty doesn’t replace this right. ACM ConsuWijzer’s information doesn’t set a fixed statutory warranty period for all mesh systems.

Which Dutch requirements are relevant when buying?

According to the RDI, radio equipment placed on the market must meet the applicable European requirements and carry the correct CE marking. Since 1 August 2025, applicable RED 3.3 cybersecurity requirements have also applied to internet-connected radio equipment; which requirements apply depends on the device. Check the specific model, as a product listing alone doesn’t confirm that all applicable requirements have been met.