Family with weak Wi-Fi on another floor
Wants to open family videos in places where the signal is weak. The number of mesh nodes and where you place them are particularly important.
Start with the places where you want to share family videos, then check whether the mesh nodes connect well to each other there. For three floors, the Consumers’ Association’s guidance suggests starting with three nodes, but in many homes you can begin with two and add more if needed. If you have network cables, ethernet backhaul is an option. Without cables, you could consider wireless mesh or, in suitable conditions, powerline.
Wants to open family videos in places where the signal is weak. The number of mesh nodes and where you place them are particularly important.
Can connect the mesh nodes by cable and is looking for a set with suitable ethernet ports and connection options.
Wants to share videos between its own devices and needs to set up network access and file sharing properly, as well as ensuring good Wi-Fi coverage.
Suitable when: there’s a usable network cable between floors, or you can install one.
Bear in mind: you’ll need cables and sometimes a suitable switch; check how each model connects to your router.
Suitable when: cables aren’t practical and you can place the mesh nodes where they can reach each other over Wi-Fi.
Bear in mind: floors and placement affect the connection; the stated data speeds don’t predict the speed you’ll get in your home.
Suitable when: there’s no network cable and compatible mesh nodes can connect over the same electrical circuit.
Bear in mind: check model compatibility and the connection in your home; according to TP-Link, the Deco PX50 powerline backhaul isn’t compatible with the PX10, P7, P9 or standalone powerline adapters.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Coverage across multiple floors | Check the signal in the places where you watch videos and see whether you can add more nodes to the set. The Consumers’ Association suggests starting with three nodes for three floors, but also recommends beginning with two in many homes and adding more if needed. | If I want to open videos on different floors, I want to know whether the nodes provide coverage there. Around 36% of consumers give floor-by-floor coverage their highest priority. |
| Connection between mesh nodes | Compare ethernet, wireless and any powerline backhaul options. After installation, check how the nodes connect in your home. | If walls or floors make the connection between floors difficult, I want to know how the mesh nodes communicate with each other. Around 29% of consumers give this connection their highest priority. |
| Access to shared videos | Check that devices can access the same home network and set the required folder and user permissions. | If I want to share videos on my own devices, I want the right family members to be able to open the files. Around 21% of consumers give access to shared files their highest priority. |
| Connection to your existing network | Check the pack size, ports and available router or access point mode. Also allow for any cables or extra equipment you may need. | If I want to keep using my existing router, I want to know whether the set will connect to it without unnecessary extra equipment. Around 14% of consumers give cost and compatibility with their existing network their highest priority. |
Distance, walls and ceilings affect Wi-Fi. The speed or coverage area in a product description doesn’t automatically tell you what you’ll get in the places you use it at home.
Check the connection where you want to share videos and compare backhaul and expansion options, rather than looking only at the highest stated Mbps figure.
You may need an extra mesh node or cabling. This could also mean extra installation work and finding a different place for the equipment in your home.
For example, eero distinguishes between the 6+ router, which has two ethernet ports, and the 6+ Extender, which has none.
If you want to connect a device or backhaul by cable, check the version and ports on each node included in the pack.
With Deco, devices on the guest network can’t access devices on the main network. Network coverage also won’t enable file sharing automatically.
Keep guest access separate and set only the necessary file permissions on the family devices involved.
According to TP-Link, the Deco PX50’s powerline backhaul isn’t compatible with the PX10, P7 or P9.
Before expanding your system, check the full model name and supported backhaul.
An incompatible extra node may not work for the powerline connection you have in mind.
The Deco range includes models with ethernet backhaul and models with powerline backhaul. The right connection depends on your home’s infrastructure.
The ZenWiFi XT9 is a tri-band Wi-Fi 6 model for wireless setups; the BT10 is a separate Wi-Fi 7 range.
The Mesh Set 4200 is an option for expanding an existing FRITZ!Box or setting up a mesh system with another router.
The eero 6+ is a dual-band Wi-Fi 6 option for anyone looking to expand their home network. Check the differences between versions.
These mesh systems offer options with multiple placement points and wireless connections between nodes; check how many units and which connections you need for each version.
No image available
A two-piece mesh system to compare if you’re looking for wireless mesh with multiple radio bands; check whether two nodes will suit the places where you share videos.
Tri-band Wi-Fi 7 (802.11be) with 2.4, 5 and 6GHz bands.
No image available
The set with three mesh nodes is worth comparing if you want coverage across multiple floors; once they’re in place, check that the connection works in the locations you need.
Dual-band Wi-Fi 6 (802.11ax).
No image available
Worth comparing if you want to place a mesh node using an ethernet connection; check whether two units and the available connections are enough for your home.
Dual-band Wi-Fi 6 (802.11ax).
No image available
A set with three mesh nodes to compare if you’re looking for multiple placement points and tri-band Wi-Fi; check the connection on the floors where you use your files.
Tri-band Wi-Fi 6E (802.11ax) with 2.4, 5 and 6GHz bands.
No image available
The three-piece set gives you several mesh nodes to position around your home. Compare the Wi-Fi generation with your devices and needs before choosing.
Dual-band Wi-Fi 5 (802.11ac).
No, not always. The Consumers’ Association’s guidance suggests starting with three nodes for better Wi-Fi across three floors, but also says that in many homes you can begin with two and add more if needed. Check the signal in the places where you want to use your videos.
Check that the devices can access the same home network and that the right folder and users are set up. With Deco, devices on the guest network can’t access devices on the main network; Windows file sharing also has its own permissions.
According to TP-Link, the PX50 powerline backhaul isn’t compatible with the PX10, P7 or P9. Check the full model name and intended connection before expanding your system.
As well as any manufacturer’s warranty, statutory consumer rights apply: you’re entitled to expect a product to work properly for a reasonable length of time under normal use. According to ACM ConsuWijzer, the seller must resolve the issue free of charge if a product develops a fault sooner than reasonably expected; there’s no fixed statutory period that applies to every router.
According to the Dutch Authority for Digital Infrastructure, home Wi-Fi is licence-exempt when you use the designated frequencies and comply with the conditions of use. Radio equipment placed on the market in the Netherlands must also meet the relevant requirements, including the required CE marking. Check for the marking and follow the instructions for your specific device.