Who is mesh Wi-Fi for?

Families with weak Wi-Fi in other rooms

You want to watch family videos while phones and TVs are spread around the house. Where you place the Wi-Fi nodes, and how well they connect to each other, will affect what a system can deliver in your home. The Consumentenbond and KPN Community Knowledge Base both highlight coverage and placement as important considerations.

Households with several phones and TVs

You want your devices to find each other for Cast or AirPlay. Google and Apple list the network connection of the devices involved as a requirement. So, a mesh system’s Wi-Fi specification alone won’t tell you whether your devices can reach each other.

Families sharing videos from home storage

If you often stream content locally, check whether you can run a cable to a Wi-Fi node or a wired device, and how many Ethernet ports will still be free. ASUS and TP-Link describe wired options for specific models.

What should you look for?

Wireless mesh system

A good fit if: you want Wi-Fi in more rooms and can place an extra node somewhere it can still connect to the network.

Trade-off: the wireless connection between nodes depends partly on their placement and any obstacles. Adding more nodes doesn’t guarantee better coverage.

Mesh with Ethernet backhaul

A good fit if: you have usable network cables between the planned node locations, such as by a TV or home storage device.

Trade-off: you’ll need a suitable cable route and connections on the version you choose. ASUS says Ethernet backhaul on the ZenWiFi XD5 frees up the Wi-Fi bands for wireless devices; this doesn’t mean every home will see a measured speed increase.

Check your existing network first

A good fit if: you’re not yet sure whether buffering is caused by poor coverage, your internet connection or the device storing the video.

Trade-off: check coverage and device discovery first; client isolation can prevent communication with Google Cast devices.

What to consider What should you check? Who is this important for?
Coverage between rooms Compare the number of nodes and possible locations between them. Check where your existing connection drops out; advertised coverage doesn’t guarantee coverage in your home. If family videos keep buffering in rooms where we use phones and TVs, I want to know whether an extra node will still have a connection there. Around 31% of consumers put coverage and the connection between rooms at the top of their list.
Devices finding each other Check which phone, app, TV or receiver you use. Google lists being on the same Wi-Fi network and having AP isolation switched off as requirements for Cast; Apple says AirPlay video requires devices to be on the same Wi-Fi network. If my phone can’t find the TV or receiver, I want to check first that they’re on the right network and support the feature. Around 25% of consumers prioritise devices working together.
Home storage and cabling Check whether you can use Ethernet and how many ports the exact version has. Remember to allow for the connections needed for your modem and backhaul. If videos are stored at home, I want to know how the storage, mesh nodes and playback devices can be connected. Local video streaming is also a top priority for around 25% of consumers.
Management and features Check which app and account you’ll need, which features are included and whether the features you want require a subscription. Also check for the CE mark on the version being offered. If easy management and clarity about ongoing costs matter to you, check which app and features come with the system. Around 19% of consumers prioritise management and additional conditions.

Common buying pitfalls

  • Mistaking combined Wi-Fi speeds for the speed on a single device

    According to TP-Link, actual throughput and coverage depend partly on network conditions, devices and environmental factors. The Consumentenbond also notes that the Wi-Fi standard alone doesn’t determine performance.

    First, work out where coverage drops off and how the device playing the video connects to the network.

  • Buying more mesh nodes when your devices can’t find each other

    Google warns that AP isolation can prevent communication with Cast devices. A stronger Wi-Fi signal won’t automatically fix this kind of network problem.

    Check your home network and the settings on the devices involved before choosing extra hardware. Only change security settings on your own trusted network.

  • Assuming you’ll have an extra Ethernet port or that paid features are included

    Backhaul and wired devices use up ports. TP-Link also states that some advanced HomeShield features require a subscription.

    Check the number of ports on the exact system and find out which features are included and what subscription terms apply.

    A wired connection may also mean you need to install a suitable cable route.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range designed to provide coverage in several rooms. Optional Ethernet backhaul is worth considering when comparing systems.

  • TP-Link lists three gigabit ports on each Deco X50 node.
  • The manufacturer says actual throughput and coverage depend on factors including obstacles and connected devices. Some HomeShield features require a paid subscription.

ASUS

The ZenWiFi XD5 offers a documented wired backhaul option. The ZenWiFi BD4 is a separate dual-band Wi-Fi 7 range.

  • ASUS lists two 2.5-gigabit ports for the BD4. The XD5’s wired backhaul could be useful if you already have Ethernet installed.
  • The BD4’s specifications don’t prove it will perform better with older devices or in a particular home. Check how many nodes are included in the version you choose.

FRITZ!

The Mesh Set 1700 is worth comparing if you want to keep your existing router and extend your network with several mesh nodes.

  • FRITZ! describes connecting this range to an existing router and providing automatic updates.
  • Check the number of nodes and available ports on the version you choose. FRITZ!’s performance claims are manufacturer claims.

KPN

SuperWifi is mainly worth comparing if you use KPN for your home network and the MijnKPN app.

  • KPN describes placement guidance and network management through its app.
  • This doesn’t show that the solution will suit every setup with another provider or every video app.

Google

Nest Wifi Pro is a Wi-Fi 6E mesh option to compare with, among other things, an existing modem.

  • Google says you can expand the system with additional Nest Wifi Pro routers.
  • According to Google, Nest Wifi Pro isn’t compatible with earlier Nest Wifi or Google Wifi points. The advertised coverage is a manufacturer figure.

Joybuy products

These products are mesh Wi-Fi options for coverage in several rooms, with differences in cabling, ports and management.

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

A mesh system with two nodes for using Wi-Fi in several areas of your home.

The product description lists Wi-Fi 6 and Ethernet backhaul between the nodes.

View at Joybuy
TP-Link Deco X50, 3-pack

TP-Link Deco X50, 3-pack

The three mesh nodes are an option to consider if you want to place nodes around your home.

Dual-band Wi-Fi 6 (802.11ax); three gigabit ports per node, according to the product description.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 Dual-Band WiFi 7 Mesh Router

Huawei eKit OptiX FG736 BE3600 Dual-Band WiFi 7 Mesh Router

The product description says that multiple units can work together to form a single network.

Dual-band Wi-Fi 7, according to the product name.

The product description lists management through the HUAWEI SmartLife app.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 Dual-Band WiFi 6 Mesh Router

Huawei eKit OptiX FG630 AX3000 Dual-Band WiFi 6 Mesh Router

A mesh router to compare if you want to manage your home mesh network through an app.

Dual-band Wi-Fi 6, according to the product name.

The product description lists management through the Huawei AI Life app.

View at Joybuy
TP-Link Deco X50-PoE, 2-pack

TP-Link Deco X50-PoE, 2-pack

A mesh system with two nodes to consider if you can use Ethernet cabling.

Dual-band Wi-Fi 6 (802.11ax) and two Ethernet ports per node, according to the product description.

The product description lists PoE, which delivers power and data over a single Ethernet cable.

View at Joybuy

Frequently asked questions

Will mesh Wi-Fi let your iPhone send video to any TV?

No, not automatically. For AirPlay video, Apple requires a compatible receiver and a connection to the same Wi-Fi network. Check the TV or connected receiver separately.

Why isn’t my Google Cast device appearing?

Check that your phone and receiver are on the same Wi-Fi network and that AP or client isolation isn’t preventing them from communicating. Google lists these network requirements for Cast; only change settings on your own trusted home network.

Do you need to replace your provider’s modem to use mesh Wi-Fi?

Not always: FRITZ! describes connecting the Mesh Set 1700 to an existing router. Before buying, check that the connection and management options on the exact system will work with your modem.

When is wired backhaul worth considering?

Wired backhaul is worth considering if suitable network cables run between your mesh nodes or you can install them. ASUS says Ethernet backhaul on the ZenWiFi XD5 frees up the Wi-Fi bands for wireless devices; this doesn’t prove you’ll get a speed increase in every home.

What should you check about the CE mark on a mesh system?

Check the mark on the exact version being offered. The Dutch Authority for Digital Infrastructure states that radio equipment must meet the applicable requirements and carry the correct CE mark; a general model page doesn’t necessarily show the mark on the individual device.

Are all the features of a mesh system included?

Not always: TP-Link states that some advanced HomeShield features require a subscription. Check which features are included with the exact system and what subscription terms apply.