Who is this buying guide for?

Home worker with a weak signal downstairs

You want to know whether the signal reaches your workspace. The placement of the Wi-Fi nodes and the connection between them are important considerations.

Home worker with an existing Ethernet cable

You may be able to use a cable and want to weigh up whether a wired access point or mesh node is right for the connection downstairs.

Renter who wants to be able to move their equipment

You’re looking for a setup with standalone equipment and want to work out how many nodes you need, without making permanent changes to your home straight away.

What should you look for in Wi-Fi for a downstairs workspace?

First, check whether an Ethernet cable already runs downstairs. If not, see whether you can place an extra wireless node somewhere it can still get a usable signal. If the wireless connection between floors is too weak, powerline is an alternative worth testing.

What to consider What should you look for? Who is this important for?
Signal in the workspace Check the signal in your workspace and where you would place the extra Wi-Fi node. If I work downstairs, I want to know whether the signal is usable where the extra node will go. Around 36% of consumers prioritise signal coverage downstairs.
Connection between the nodes Check whether Ethernet backhaul is possible and count the Ethernet ports you’ll need at your workspace. I want to know whether a cable can provide the connection between floors and whether I can connect my work device by cable. Around 29% of consumers prioritise this connection.
Reversible installation Check which power sockets are available and which router or access point mode will work with your modem. I want to be able to move my equipment and avoid making significant changes to my rented home. Around 21% of consumers prioritise a simple, reversible installation.
Total cost Check how many nodes you need and whether the features or power supply you want require extra equipment. I don’t want to buy more equipment than I need for one workspace in a compact home. Around 14% of consumers prioritise keeping the total cost down.

Pitfalls to avoid when buying

  • Looking only at the stated coverage or Wi-Fi speed

    A stated coverage range doesn’t guarantee that the signal will reach your workspace through the floor. Obstacles and node placement also play a part.

    Check the signal both in your workspace and where you want to place the second node.

    If the floor blocks the signal, you may need to try a different position or connection method.

  • Placing a wireless node where the signal is weakest

    The extra node also needs a connection to the main network. If the signal is already very weak in that spot, the connection may not be good enough.

    First, find a spot where the node can still receive a usable signal. If the connection between floors is a problem, check whether an existing cable or powerline could help.

  • Assuming powerline speeds are guaranteed

    TP-Link says that actual powerline throughput varies depending on network and environmental factors, including the electrical wiring.

    Test the connection using the power sockets you plan to use and check the seller’s returns policy.

    If the sockets you plan to use don’t provide a usable connection, you may need to try a different connection method.

  • Assuming all mesh nodes and ports are interchangeable

    According to Google, Nest Wifi Pro cannot form a single mesh network with earlier Nest Wifi or Google Wifi nodes. The number of Ethernet ports on each unit also varies between the Deco models mentioned.

    Before expanding a set, check the full model name, generation, ports on each unit and compatibility with your existing equipment.

    An incompatible set could mean replacing your existing nodes or buying additional networking equipment.

Brands to consider for this setup

TP-Link

Deco models offer different ways to connect mesh nodes, including wirelessly, via Ethernet backhaul and, with the PX10, via powerline.

  • The official comparison lists three gigabit ports per unit for Deco X50 V1 and two for Deco X20 V1. Check that the version matches the set you’re considering.
  • TP-Link says the actual powerline throughput of the PX10 depends on network and environmental conditions, so results in your home aren’t guaranteed.

FRITZ!

FRITZ! says the Mesh Set 1700 can be used with a FRITZ!Box or a router from another brand.

  • The two-piece set may be worth considering if you want to keep your existing router.
  • For the version you choose, check that the features you want work with your router and that it has the right connections for your workspace. The set won’t automatically guarantee coverage between floors.

Google

Google describes Nest Wifi Pro as an expandable Wi-Fi 6E mesh system that can be used with your existing Wi-Fi modem.

  • According to Google, you don’t necessarily need to replace your existing modem with the mesh system.
  • According to Google, Nest Wifi Pro can’t be combined with older Nest Wifi or Google Wifi nodes to form a single mesh network. Stated coverage doesn’t guarantee that the signal will reach through the floor in your home.

ASUS

ASUS presents ZenWiFi AX (XT8) as a tri-band Wi-Fi 6 system for larger homes and multiple floors.

  • The tri-band setup may be worth comparing if the wireless connection between nodes is a key consideration.
  • The coverage described by ASUS doesn’t automatically mean an XT8 set is suitable or necessary for a compact rented home.

Linksys

Linksys describes Velop Micro 6 as a mesh router that can be expanded with nodes.

  • The manufacturer lists connections on the router and recommends placing it in an open area.
  • Check the ports on the router and node separately: the router ports listed by Linksys don’t prove that a node downstairs has the same connections.

Joybuy products for a downstairs workspace

This selection includes access points and mesh nodes for connecting to a downstairs workspace. For each model, check whether you’ll need an Ethernet cable, a compatible PoE power supply or a wireless connection.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 system

ASUS ZenWiFi BD4 Wi-Fi 7

Suited to a setup where you can use a wired connection between the nodes.

Dual-band Wi-Fi 7 (802.11be); the product information lists two 2.5 Gbit/s Ethernet ports and wired backhaul.

View at Joybuy
TP-Link Deco X20 Wi-Fi 6 mesh set, 2-pack

TP-Link Deco X20 (2-pack)

A two-piece mesh set to consider if you want to place an extra node downstairs.

Wi-Fi 6; the product information lists both wireless connection and Ethernet backhaul between Deco units.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

Suited to a wired Wi-Fi extension if an Ethernet cable runs to the access point’s location.

Dual-band Wi-Fi 6, Ethernet and PoE support. It can be wall- or ceiling-mounted; using PoE requires a compatible PoE power source.

View at Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 mesh set, 2-pack

TP-Link Deco X50-PoE (2-pack)

A mesh option for a setup with Ethernet cabling to the nodes.

Dual-band Wi-Fi 6 and PoE support; the product information lists two Ethernet ports per unit. PoE requires a compatible power source and Ethernet cabling.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh set, 2-pack

TP-Link Deco X50 (2-pack)

Worth considering if you’re looking for a two-node mesh set and can use a cable between the nodes.

Wi-Fi 6; the product information lists optional Ethernet backhaul and three gigabit ports per unit.

View at Joybuy

Frequently asked questions

Do you need a permit or registration to use Wi-Fi at home in the Netherlands?

Using Wi-Fi on designated frequencies is licence-exempt, provided you comply with the applicable conditions. The Dutch Authority for Digital Infrastructure says there is no notification or registration requirement; do check that your chosen radio equipment meets the relevant requirements.

Do you need permission to install an Ethernet cable in a rented home?

It depends on the work involved. According to the Dutch government, permission isn’t needed for minor alterations that can be reversed without too much expense; it is needed for renovations. A freestanding Wi-Fi node is different from making a permanent change to the home.

Will a mesh set work with your current modem?

This depends on the system and setup. TP-Link lists an access point mode for the Deco X20 and X50 versions compared; FRITZ! says the Mesh Set 1700 can be used with routers from other brands. Check that the features you want work with your modem for the exact model you’re considering.

Can powerline mesh help if Wi-Fi doesn’t pass through the floor properly?

Powerline mesh may be an option because the Deco PX10 can use your home’s electrical wiring to connect nodes. TP-Link warns that actual throughput varies depending on network and environmental factors, so test the power sockets you plan to use before relying on this option.

What are your rights if a set bought online isn’t suitable or breaks down too soon?

For a standard online consumer purchase, you generally have a 14-day cooling-off period after delivery, subject to legal exceptions. Your statutory guarantee is separate from any manufacturer’s warranty: if a product doesn’t perform as you could reasonably expect under normal use, the seller is responsible for providing an appropriate solution.