Who is this buying guide for?

Anyone working from home downstairs

If you regularly work or make video calls downstairs, first check whether you can use an Ethernet cable. The Panelwizard survey commissioned by VodafoneZiggo looked at problems with video calls at home, not specifically at downstairs workspaces.

Anyone living in a multi-storey home

If you want Wi-Fi on several floors, decide where the nodes need to go and how they’ll connect to each other. Consumentenbond recommends positioning them according to the areas where you need coverage.

Anyone looking to extend their existing network

If you want to keep your current router, check that your preferred network mode and any extension are compatible with your existing system. This can determine which features remain available.

What should you look for when buying?

Mesh with Ethernet backhaul

Choose this if: there’s an Ethernet cable between the router and the floor where you work, or one can be installed.

Bear in mind: you’ll need cabling, and your chosen network mode may have some limitations.

Wireless mesh

Choose this if: running cables isn’t practical and you can position the nodes where they’ll maintain a connection to each other.

Bear in mind: the wireless connection between nodes can be affected by interference, so test it in the planned locations and at your workspace.

Wired access point or extender

Choose this if: you want to keep a suitable router and mainly need extra Wi-Fi downstairs.

Bear in mind: compatibility and features vary by system. A repeater isn’t automatically a replacement for a router.

Consumentenbond recommends placing Wi-Fi extenders where you need coverage. For a downstairs workspace, the connection between that point and the router matters too.

What to consider What to look for when buying Who is this important for?
Connection between floors Check whether Ethernet backhaul is possible. If not, choose positions where the wireless connection between nodes remains reliable. If I work downstairs, I want the mesh node there to stay well connected to the router. Around 36% of consumers put this connection at the top of their buying priorities.
Coverage on multiple floors Decide which rooms need coverage and test the positioning. Don’t rely on the advertised coverage area alone. I want to be able to work downstairs and have Wi-Fi on the other floors too. Around 29% of consumers prioritise coverage across multiple floors.
Keeping your existing router Check the network mode, compatibility with your existing system and which features remain available in that mode. If my current router still suits my network, I’d rather keep it than replace it unnecessarily. Around 21% of consumers say keeping their existing router is their top priority.
Running costs and support Compare energy use and support for the exact model. Keep your statutory rights separate from any manufacturer’s warranty. I want to know in advance what to expect after installation and who can help if something goes wrong. Around 14% of consumers prioritise running costs and support.

Buying pitfalls

  • Placing a wireless node where the Wi-Fi signal is already very weak

    An extra node still needs a connection back to the router. If that connection is weak where you place it, the node won’t automatically solve the problem there.

    Check the connection at the planned location, and look into Ethernet backhaul if it isn’t good enough.

    Adding another node or installing cabling later may increase the scope of the installation.

  • Assuming advertised coverage guarantees a signal at your workspace

    An advertised coverage area isn’t a measurement of your home and, on its own, doesn’t tell you how well the connection will perform downstairs.

    Don’t treat the advertised coverage as a guarantee. Test the connection at your workspace and compare systems on the same basis.

  • Assuming access point mode retains all router features

    TP-Link states that some Deco router features aren’t available in access point mode.

    Decide which router will provide the network features, and check before buying which features remain available in your chosen mode.

  • Assuming a similarly named version is the same product

    A Joybuy listing for the Deco X50-PoE is for a different version from the Deco X50 reviewed here. According to the relevant product information, the number of ports on each node differs.

    Compare the full model name, version, power supply and ports. Don’t treat the X50-PoE as an identical replacement for the X50.

    A different port layout or power requirement may mean you need to adapt your planned setup.

Brands to compare

TP-Link

Deco is worth considering if you’re looking for a complete mesh kit that you can expand and that supports Ethernet backhaul.

  • According to TP-Link, the Deco X50 can connect wirelessly or via Ethernet backhaul. The Dutch product page lists three gigabit ports per node.
  • The advertised coverage isn’t a real-world test in a multi-storey home. According to TP-Link, not all Deco router features are available in access point mode.

ASUS

ZenWiFi and AiMesh are worth considering if you want to be able to configure the backhaul and network mode.

  • ASUS describes the ZenWiFi AX (XT8) as a tri-band Wi-Fi 6 system. According to ASUS, Ethernet backhaul is also possible.
  • A wireless 5GHz connection doesn’t guarantee a signal through your floors. ASUS also specifies port and configuration requirements for certain wired AiMesh setups using switches.

FRITZ!

A FRITZ!Repeater may be a good option for extending an existing FRITZ!Box network.

  • According to FRITZ!, the FRITZ!Repeater 3000 AX can connect via LAN and be added to FRITZ! Mesh with a FRITZ!Box running FRITZ!OS 7 or later.
  • The repeater alone isn’t a complete replacement for your existing router.

NETGEAR

Orbi is worth considering if you’re looking at a router with matching satellites and different backhaul options.

  • NETGEAR documents both wireless and wired backhaul for applicable Orbi systems.
  • Ports and performance vary by version. NETGEAR recommends updating the firmware before setting up a wired configuration.

Mesh products on Joybuy

These products are mesh kits for getting Wi-Fi in several areas of your home. They include wireless options and models whose product information mentions Ethernet backhaul. For radio equipment placed on the EU market from 1 August 2025, check the applicable conformity information and visible CE marking for the exact version you choose. The Dutch Authority for Digital Infrastructure sets out the safety requirements that apply from that date.

TP-Link Deco E4 mesh kit, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack) Wi-Fi 5

For anyone looking for mesh Wi-Fi in several areas of the home; the product name specifies a three-unit set.

Dual-band (2,4 GHz/5 GHz); Wi-Fi 5 (802.11ac).

View on Joybuy
ASUS ZenWiFi BT8 mesh kit, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack) Wi-Fi 7

For anyone looking for a mesh kit with two nodes; the product information mentions AiMesh.

Tri-band (2,4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be).

View on Joybuy
TP-Link AX1800 mesh kit, 2-pack, Wi-Fi 6

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 (2-pack)

For anyone looking to use two mesh nodes and considering a wired connection between the Deco units.

Mesh Wi-Fi 6 system; the product information mentions Ethernet backhaul.

View on Joybuy
TP-Link Deco X50 mesh kit, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) Wi-Fi 6

For anyone looking for a mesh kit with three nodes and wanting to use Ethernet backhaul.

Dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax). The product information mentions optional Ethernet backhaul.

View on Joybuy
TP-Link Deco S7 mesh kit, 3-pack, dual-band Wi-Fi 5

TP-Link Deco S7 (3-pack) Wi-Fi 5

For anyone looking for mesh Wi-Fi in several areas of the home; the product name specifies a three-unit set.

Dual-band (2,4 GHz/5 GHz); Wi-Fi 5 (802.11ac).

View on Joybuy

Frequently asked questions

How many mesh nodes do I need for multiple floors?

Consumentenbond’s buying guide suggests two nodes for a two-storey home and three for a three-storey home, but recommends starting with a two-unit kit in most homes and adding more later if needed. Above all, check the connection and coverage at your workspace.

Can I keep my existing router?

With Deco, you can use access point mode. Your existing router then manages the network addresses, and Ethernet backhaul remains supported. According to TP-Link, some Deco router features aren’t available in this mode. Check the instructions for the exact version.

What can I do if the connection between the nodes isn’t good enough?

First check the position and connection status of the nodes. If you can run an Ethernet cable, look into Ethernet backhaul. TP-Link and NETGEAR describe configurations for this, but the connection method depends on the system and network mode.

What costs and rights should I consider after buying?

Compare the energy use of the nodes, as they’ll be switched on for long periods. According to the Dutch government, the seller is responsible under Dutch statutory warranty law for ensuring that a product is of satisfactory quality. Any manufacturer’s warranty is separate.

Do I need a licence to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used on the designated licence-exempt frequencies without a licence, notification or registration, as long as the conditions of use are met. That doesn’t automatically make any imported radio equipment suitable for the Dutch market: check the version and its accompanying conformity information.