Who is this relevant to?

Working from home downstairs

You want a reliable connection at a workspace below a floor or behind several walls. Compare the connection between the mesh nodes with the ports available at your desk. The Consumentenbond recommends connecting a PC or laptop using a network cable when running a speed test.

A household streaming on multiple screens

If several screens are streaming at once, check the internet speed where you watch as well as the connection between the mesh nodes. Netflix recommends a stable connection of at least 15 Mbps for its own 4K UHD stream.

Living with difficult-to-reach areas

If you cannot run a cable or your modem is in an awkward position, the location of the nodes and the connection in the places where you actually work and watch are important. A quoted coverage area does not automatically predict reception in your home.

What should you look for when choosing?

Mesh with wired backhaul

When: if there is already a network cable between floors or you can install one.

Trade-off: the connection between nodes then runs over ethernet, but you will need a suitable cable route. TP-Link describes wired backhaul as more stable and faster than the wireless connection used by Deco; this does not tell you how it will perform in a particular home.

Wireless mesh

When: if running a cable is not practical and you can place an additional node where it still has a usable connection to the main network.

Trade-off: positioning is less dependent on a cable route, but walls, floors and distance can affect the connection between nodes and the connection to your devices.

Measure first and check your existing network

When: if you are not yet sure whether the internet connection, modem location or Wi-Fi coverage is the limiting factor.

Trade-off: a wired speed test and a different modem location can help you decide whether you need a new system, but they will not solve every coverage problem.

What to consider What to look for when buying Who should prioritise this?
Coverage between floors Decide where the main node and downstairs node can go. Check whether wired backhaul is possible; if not, test the wireless connection in those locations. I want to work downstairs without an additional node having a weak connection of its own. Around 36% of consumers say coverage between floors is their main consideration.
Several screens at once Check the speed where you watch while the network is in use. Netflix recommends a stable connection of at least 15 Mbps for its own 4K UHD stream; this is not a universal requirement for other services or for multiple streams combined. If several screens are streaming at once, I want to know whether the connection is strong enough in each viewing area. Around 29% of consumers give simultaneous streams the highest priority.
Wired connections downstairs Count the ethernet ports you need and check the ports on each individual mesh node. Allow for a port that may be used for backhaul. I may want to connect my computer or another work device downstairs using a cable. Around 21% of consumers prioritise wired connections at their workspace.
Compatibility with your existing network First, measure the speed using a wired connection to the modem. Then check the connection order for router or access point mode, and what is included in the system you choose. I want to know whether my modem and the system I choose will work together before buying any equipment. Around 14% of consumers focus mainly on compatibility with their existing network.

Common pitfalls

  • Treating quoted coverage as a measurement of your home

    Floors, walls and distance affect reception. Manufacturer figures do not show what connection speeds you will get at your downstairs workspace.

    Decide where the nodes can go in advance, then test the connection at your workspace and by your screens after installation.

    If the connection is not good enough, you may need an additional node or a different cable route.

  • Assuming every node in a system has the same ports

    For the Linksys Velop Micro 6, Linksys lists wired ports for the LN1100, while the LN1200 specifications list only a USB-C power port.

    Check the exact model you plan to put downstairs and count how many ports you will need there.

  • Buying a new system before measuring your connection

    A slow connection could be down to Wi-Fi or your internet service. Without measuring it, you will not know which needs attention.

    Test the connection to your modem using a cable first, and see whether the modem's location affects reception before comparing systems.

  • Expecting older Google mesh nodes to extend Nest Wifi Pro

    Google states that Nest Wifi Pro will not form a single mesh network with older Nest Wifi or Google Wifi nodes.

    Check the generation of your existing nodes before choosing an extension.

Brands to compare

TP-Link

Deco systems may be worth comparing if you want wired backhaul and can follow the correct connection order for your network mode.

  • TP-Link lists three gigabit ports per node for the Deco X55; this specification does not automatically apply to other Deco models.
  • According to TP-Link, the connection order depends on whether you use router or access point mode. The stated benefits of ethernet backhaul are not a measurement of performance in your home.

ASUS

The ZenWiFi BD4 is worth comparing if AiMesh, wired backhaul and 2.5GbE connections matter to you.

  • ASUS specifies two 2.5GbE ports for the BD4, as well as an option for wired backhaul.
  • The BD4 is dual-band. The manufacturer's stated speed and coverage do not guarantee reception at a particular downstairs workspace.

FRITZ!

The FRITZ!Mesh Set 1700 is a three-piece system to consider if you want to place several nodes and keep your existing router or modem.

  • The manufacturer lists three FRITZ!Repeaters 1700 in the 3-pack and support for Wi-Fi 7.
  • Check the connection options on the exact system and the node you plan to put downstairs; the system name does not prove what coverage you will get in your home.

Google

Nest Wifi Pro may suit you if you want to assess the Google Home environment and the connections on each individual Pro router.

  • Google specifies two gigabit ethernet ports per Nest Wifi Pro router.
  • Google states that Nest Wifi Pro will not form a single mesh network with older Nest Wifi or Google Wifi nodes.

Linksys

With the Velop Micro 6, compare the main LN1100 router with the secondary LN1200 nodes.

  • According to Linksys, the LN1100 has wired ports.
  • Linksys lists only a USB-C power port for the LN1200, so do not assume every node has the same wired connections.

Joybuy products

These TP-Link Deco mesh systems are options to compare if you want network nodes in several rooms. Check the number of nodes, connections and support for wired backhaul for each model.

TP-Link Deco E4 (3-pack), Wi-Fi 5

TP-Link Deco E4 (3-pack), Wi-Fi 5

This three-unit system may suit you if you want to spread mesh nodes across several rooms.

The description lists two ethernet ports per unit, with speeds of up to 100 Mbps.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

This system may suit you if you want to compare a two-piece mesh set-up with a wired connection between the Deco units.

The description lists Wi-Fi 6 and support for ethernet backhaul between the units.

View at Joybuy
TP-Link Deco M4 (3-pack), Wi-Fi 5

TP-Link Deco M4 (3-pack), Wi-Fi 5

This three-piece system may suit you if you want to spread nodes across several rooms.

The description lists roaming between the Deco units and two ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 (3-pack), Wi-Fi 6

TP-Link Deco X50 (3-pack), Wi-Fi 6

This three-unit system may suit you if you want to spread mesh nodes across different rooms.

The description lists three gigabit ethernet ports per unit for wired connections.

View at Joybuy
TP-Link Deco S7 (3-pack), Wi-Fi 5

TP-Link Deco S7 (3-pack), Wi-Fi 5

This three-piece system may suit you if you want to place network nodes in several rooms.

The description lists three ethernet ports per unit.

View at Joybuy

Frequently asked questions

Should you upgrade to a faster internet plan if streams keep buffering downstairs?

Not before measuring your connection. First, test it using a cable connected to the modem, then check the speed where you watch. Netflix recommends a stable connection of at least 15 Mbps for its own 4K UHD stream; other services and simultaneous use may have different requirements.

How do you connect Deco nodes to your existing modem using a cable?

According to TP-Link, the connection order depends on the mode you have set. In router mode, connect the wired satellite to the LAN port on the main Deco or to a switch connected to it. In access point mode, TP-Link also describes connecting through the main modem or router. Check in the app that ethernet backhaul is active.

Where should you place the mesh nodes?

First, test whether moving the modem to a more central location improves reception, then check the connection at your workspace and by your screens. Walls and ceilings affect the signal, so assess the placement where you actually use the network.

Are you always entitled to only two years' warranty on a mesh system in the Netherlands?

No. ACM ConsuWijzer explains that your statutory rights exist alongside any manufacturer's or seller's warranty. With normal use, the product must meet what you could reasonably expect from it. If the product is faulty, the seller is responsible for providing an appropriate solution.

Can you use or sell an imported mesh system in the Netherlands?

Radio equipment placed on the market must meet the applicable European requirements and carry the required CE marking. The Dutch Authority for Digital Infrastructure advises checking the marking and the installation and user instructions for the specific device; a foreign product name does not, by itself, prove compliance.