Student in a distant study
You’re taking an interactive language lesson in a room far from the router and want to avoid the picture or sound cutting out. The connection where you’re sitting matters more than the advertised Wi-Fi speed alone.
If there’s an Ethernet cable to the study, or a suitable spot in between, mesh Wi-Fi with Ethernet backhaul is a sensible option; TP-Link lists this as a feature on certain Deco models. Without a cable, a wireless mesh setup depends on the signal between the nodes, so place and test a node somewhere it can still get a good connection to the network. First, test your internet connection using a wired device to make sure it’s working properly: Wi-Fi 7 or extra nodes won’t fix a problem with the connection itself.
You’re taking an interactive language lesson in a room far from the router and want to avoid the picture or sound cutting out. The connection where you’re sitting matters more than the advertised Wi-Fi speed alone.
You want to get a connection to the study without running a cable through the house. A wireless mesh node only works if it’s placed somewhere it can still get a good enough connection to the network.
You want to improve the connection for lessons without needlessly replacing your current modem or familiar network setup. So check in advance how a separate mesh system will work with your existing equipment.
The Consumers’ Association points out that walls and floors can interfere with the Wi-Fi signal. So assess the connection where you’ll be taking your language lesson.
| What to consider | What should you look for? | Who is this important for? |
|---|---|---|
| Signal to the study | Check whether Ethernet backhaul is possible. Without a cable, test an in-between spot where the mesh node can still get a good signal. | If I’m teaching in a room with weak Wi-Fi, I want to know whether the connection between the nodes will still work there. Around 36% of consumers are mainly concerned about getting a signal in the study. |
| Picture and sound during lessons | First, test your internet connection using a wired computer, then check the connection where you’ll be taking the lesson. Don’t choose based only on the stated Wi-Fi standard. | For an interactive lesson, I want to avoid the picture or sound cutting out, but I also want to know where the problem is occurring. Around 29% of consumers prioritise uninterrupted lessons. |
| Existing modem and network | Decide whether your broadband modem will remain the router. If you’re buying a separate system, check its access point mode and the recommended connection setup. | If I want to keep my current modem and network setup, the new system needs to work with them. Around 21% of consumers are mainly concerned about keeping their existing network. |
| Number of nodes and running costs | Compare the size of the system with the places where you can install the nodes, and check whether your provider already offers a suitable option. | I don’t want to buy more nodes or features than my home needs. Around 14% of consumers focus mainly on the total purchase and running costs. |
Distance, walls and floors all affect the signal. A manufacturer’s coverage claim isn’t a measurement of how the system will perform in your home.
Test the connection where you’ll be taking your lesson and check whether a wired connection is possible.
A mesh node also needs a usable connection to the rest of the network.
Try an in-between spot where the node can still get a strong enough signal, or check whether a wired connection is possible.
The Wi-Fi standard alone doesn’t determine how well the connection works where you’re taking the lesson. The problem could also be with your internet connection.
First, test your connection using a wired device, then check the Wi-Fi where you’ll be taking the lesson.
The Joybuy product page for the ASUS ZenWiFi BD4 is for a 2-pack, while the original external ranking lists a 3-pack. The number of nodes is therefore different.
Before you buy, check the full model name and how many mesh nodes are included in the box.
The Deco X50 is a mesh Wi-Fi range that supports wireless or wired connections between nodes.
The FRITZ!Mesh Set 1700 is an option for use alongside an existing router; the FRITZ!Repeater 3000 AX is a different product range.
ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh range with a wired backhaul option.
SuperWifi nodes are most relevant if you already use KPN equipment and want to manage it through MijnKPN.
SmartWifi Pods 6 are a provider option for a compatible Ziggo SmartWifi setup.
These mesh Wi-Fi systems are for homes with a room some distance from the router. Check for each model whether the listed connections and pack size suit your needs.
Image unavailable
The product description lists both wireless and wired backhaul. Check whether you can run a cable to a suitable location.
2-pack.
Image unavailable
The product description lists optional Ethernet backhaul. Check whether you can connect the nodes by cable if your home needs it.
Wi-Fi 6; 3-pack; three gigabit ports per unit.
Image unavailable
A mesh system with three units may suit a setup with several nodes. The connection where you’re taking your lesson also depends on placement and your home.
Tri-band; Wi-Fi 6E; 2.4, 5 and 6GHz bands; 3-pack.
Image unavailable
The product information lists Ethernet ports. Check whether they can be used for the wired connection you need.
Tri-band; Wi-Fi 6E; 2.4, 5 and 6GHz bands.
Image unavailable
The product description lists optional Ethernet backhaul. Check whether you can run a cable to a mesh node if you’re unsure about the wireless connection between nodes.
Wi-Fi 6; 2-pack; three gigabit ports per unit.
No. First, use a wired computer to check that your internet connection is working properly, and try moving the modem to a better spot if needed. If the Wi-Fi in the study is still the main problem, compare the options for getting a connection there.
Yes. According to TP-Link, Deco can operate in router or access point mode. In access point mode, your existing router continues to manage the network functions. Follow the setup instructions for the mode you choose; TP-Link warns that connecting multiple units incorrectly in router mode can create a network loop.
Place the node somewhere it can still get a good connection to the main network, rather than simply putting it in the spot with the weakest signal. Then test the connection at your desk during a lesson; walls and floors can affect the result.
Not necessarily: the Wi-Fi standard alone doesn’t determine how well the connection works in the study. The Consumers’ Association notes that Wi-Fi 7 doesn’t automatically offer more to the average user. First, check your internet connection, the placement and the signal where you’ll be taking the lesson.
Radio equipment placed on the market in the Netherlands must meet the applicable requirements of the Radio Equipment Directive and carry the required CE marking. The Dutch Authority for Digital Infrastructure gives Wi-Fi routers as an example; this general requirement doesn’t confirm that a particular product on sale carries the marking.