Who is this choice relevant to?

Working in a distant study

If you work remotely, you’ll want a reliable connection in your study. Consider whether running a cable is practical or whether mesh nodes would be a better fit. Consumentenbond recommends placing range extenders where you need extra coverage, while TP-Link Netherlands explains Ethernet backhaul for Deco units.

Shared design studio

A studio with several devices needs to decide which workstations should be wired and how many network ports need to remain available. TP-Link Netherlands and Ubiquiti describe the connection options for their respective equipment.

Studio with visitors

If you want to give visitors access, check whether the guest network keeps them sufficiently separate from devices and files used for shared work. Ubiquiti describes network isolation as a setting that can be enabled for this purpose.

What should you look for when choosing?

First, decide whether you can run a cable to the study and whether you want to keep your existing router. Then compare the connections you need and the guest access settings.

What to consider What to look for Most relevant to
Coverage in the study Check whether you can run Ethernet to the room and where a mesh node will still get a good connection. If I work remotely, I need a reliable connection in that particular spot. Around 36% of consumers say coverage in the study is their top priority.
Using the network at the same time Count the wired devices and check how many ports will be free once the network equipment is connected. Having enough connections matters when several people are working at the same time. Around 29% of consumers say shared, simultaneous work is their top priority.
Guest access and separation Check whether the guest network restricts access to the local network and whether you need to enable additional isolation. If visitors need Wi-Fi, I want to be able to separate their access from the devices used for studio work. Around 21% of consumers say this separation is their top priority.
Installation and equipment required Check whether you can keep using your existing router and whether your chosen set-up requires cables, extra mesh nodes or PoE power. If you want to keep installation simple, it’s worth checking in advance what equipment and connections you already have. Around 14% of consumers say ease of installation and the overall set-up are their top priority.

Common buying mistakes

  • Choosing based only on Wi-Fi speed or stated coverage

    A stated coverage range doesn’t tell you whether a wireless connection will remain reliable through the walls and across the distance to your study.

    First, consider the route to your workspace and check the connection where you want to use the network.

    Depending on your set-up, you may still need an extra mesh node or a cable.

  • Assuming an access point is a complete router

    According to Ubiquiti, the UniFi U6+ is an access point with a GbE uplink and PoE power. It doesn’t automatically replace the router and power supply functions of the complete set-up.

    Before you buy, work out which device provides your internet connection and how the access point will receive data and power.

    A suitable set-up may also require network cabling, PoE power and additional router equipment.

  • Assuming every guest network automatically provides enough separation

    Access to local devices depends on the features and settings of the network you choose.

    Check the capabilities of the exact model and explicitly enable network isolation where needed. Ubiquiti describes isolation as a setting for separating networks.

Brands to consider

TP-Link

Deco mesh could suit you if you want to connect several rooms and may be able to use Ethernet between the units.

  • TP-Link Netherlands lists Wi-Fi 6 and three gigabit ports per unit for the Deco X50; Ethernet backhaul is optional.
  • The manufacturer’s stated coverage isn’t a measurement of your studio. Check the number of units in the set and where to place them.

ASUS

ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system with a guest network.

  • ASUS Netherlands lists two 2.5G ports per unit and an access point mode.
  • The stated BD4 specification uses 2.4 and 5GHz bands; the Wi-Fi 7 label doesn’t mean it also has a 6GHz band.

FRITZ!

The expandable Mesh Set 1700 could work with an existing router set-up.

  • FRITZ! says the set can also be used behind another router.
  • Automatic integration and transfer of settings are described for a FRITZ!Box with FRITZ!OS 7 or later.

Ubiquiti

UniFi access points could suit a managed, wired set-up in a shared workspace.

  • Ubiquiti lists a GbE uplink and PoE power for the U6+; its network documentation describes network isolation.
  • An access point alone won’t fully replace the router, power supply and configuration your installation requires.

Joybuy products for mesh Wi-Fi

These products are mesh Wi-Fi options for several rooms, including a shared studio and a more distant study. For each set, check the number of units, the connections available and how you plan to connect the nodes.

TP-Link Deco X50 mesh set with 3 units

TP-Link Deco X50 (3-pack)

A mesh set with three units, giving you several placement options in your studio and study.

Dual-band Wi-Fi 6 and three gigabit ports per unit. TP-Link Netherlands lists optional Ethernet backhaul for the Deco X50.

View at Joybuy
TP-Link Deco XE75 Pro mesh set with 3 units

TP-Link Deco XE75 Pro (3-pack)

A mesh set with three units for anyone looking to cover several rooms with mesh nodes.

Tri-band Wi-Fi 6E with 2.4, 5 and 6GHz bands.

View at Joybuy
TP-Link Deco X50-PoE mesh set with 3 units

TP-Link Deco X50-PoE (3-pack)

A mesh set to consider if PoE support suits the wired installation you’re planning.

Dual-band Wi-Fi 6, PoE support and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 mesh set with 2 units

TP-Link Deco X50 (2-pack)

A mesh set with two units to consider for connecting two workspaces.

Dual-band Wi-Fi 6 and three gigabit ports per unit. TP-Link Netherlands lists optional Ethernet backhaul for the Deco X50.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4

A mesh option to consider if its stated features suit your network and guest access requirements.

Dual-band Wi-Fi 7, with 2.4 and 5GHz bands and two 2.5G ports per unit, according to ASUS Netherlands. This model includes one mesh node; check whether you need additional compatible equipment for your space.

View at Joybuy

Frequently asked questions

Do I need to replace the router straight away for the study?

Not if distance is the main issue. First, consider running a cable to an access point or placing a mesh node somewhere suitable. Consumentenbond points out that a Wi-Fi version number alone doesn’t tell you everything about performance.

Where should I place a wireless mesh node?

Place it where it still has a reliable connection to the previous node, rather than where the signal has already dropped out. Then check the connection in your study.

Can I use my own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you have the right to use your own router. Before replacing your provider’s equipment, check which connection and settings you need, and keep the device up to date.

Do I need a licence for normal Wi-Fi use in the Netherlands?

For Wi-Fi within the designated licence-exempt frequency bands, the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) does not require a licence or registration. Use equipment and settings that meet the applicable requirements; this answer does not assess non-standard radio installations.

What warranty applies if the studio buys the equipment?

The statutory consumer guarantee described by ACM ConsuWijzer applies to purchases made by consumers and cannot automatically be applied to a business purchase by the studio. For business purchases, check the terms of the specific offer.