Who is mesh Wi-Fi for?

Designer with slow uploads

You send large design files to an online workspace and want to find out whether the delay is caused by Wi-Fi or your internet connection. The Consumentenbond recommends checking your speed over an Ethernet cable too.

Home worker out of range of the router

You work on another floor or behind walls where the Wi-Fi signal drops. The placement of the mesh nodes and the connection between them are important things to consider.

Shared household with several devices

You upload files while other people are using the network, so you also want to consider the connections, management options and security settings.

What should you look for when choosing?

First, identify the problem you want to solve: an unreliable upload from one workspace, weak Wi-Fi coverage, several people using the network at once, or a kit with more nodes than you need.

What to consider What should you look for? Who is this important for?
Reliable uploads Measure your upload speed over a wired connection and check whether you can connect your work device to a mesh node. If I send design files from one permanent workspace, I want a reliable connection. Around 36% of consumers put upload reliability first.
Coverage at your workspace Check how many nodes are in the kit and whether the next node will still have a usable connection in its intended location. If Wi-Fi drops on my floor or behind walls, I want a signal at my workspace too. Around 29% of consumers give coverage their top priority.
Multiple devices Check how many Ethernet ports there are and what management and security settings the kit offers. If other people are using the network while I upload files, I want to be able to manage devices and access properly. Around 21% of consumers prioritise shared use and management.
The right kit size Check whether you’re choosing a 1-, 2- or 3-pack, and which cables and connections you’ll need for your planned setup. If I mainly need one well-connected permanent workspace, I don’t want to install more mesh nodes than necessary. Around 14% of consumers care most about choosing a kit that suits their setup.

Pitfalls to avoid

  • Assuming faster Wi-Fi means faster internet uploads

    Wi-Fi and your internet connection are two different potential bottlenecks. An advertised Wi-Fi speed doesn’t tell you how fast you can upload to your online workspace.

    First, measure your upload speed using a computer connected to your home network with an Ethernet cable. If that connection is slow too, look into your internet service before choosing mesh.

  • Putting a mesh node somewhere with no signal

    The extra node also needs a usable connection to the network. Walls, floors and distance can all affect that connection.

    Test the connection in the intended location. If you have an Ethernet cable available, check whether the kit supports Ethernet backhaul.

  • Confusing an add-on with a complete kit

    A single-node kit or an add-on may have different contents from a pack designed for several rooms.

    Before choosing, check the exact model, the number of nodes and the ports included.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range available with one, two or three nodes. It may be worth considering if coverage and the option of Ethernet backhaul are important to you.

  • TP-Link lists three gigabit ports per unit and optional Ethernet backhaul.
  • The coverage quoted by TP-Link doesn’t guarantee signal throughout a particular home or a specific upload speed. Gigabit ports aren’t 2.5G ports.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh range. It may suit anyone looking for two 2.5G connections per unit and a choice of network modes.

  • ASUS specifies two auto-detecting 2.5G WAN/LAN ports and router, access point and AiMesh node modes.
  • The specified frequency bands are 2.4 and 5 GHz. Check the contents and specifications of the pack you’re considering.

devolo

The WiFi 7 Mesh BE6500 range is available as a 2-pack, 3-pack and add-on, and may be worth considering if you want to connect several devices by cable.

  • devolo lists one 2.5G port and three gigabit ports per unit.
  • The advertised total Wi-Fi data rate isn’t a measured upload speed to an online workspace.

Mesh Wi-Fi at Joybuy

This Joybuy selection includes Wi-Fi 6 mesh kits and Wi-Fi 7 mesh routers for a design workspace. Focus your comparison on the kit size, wired connections and support for Ethernet backhaul.

TP-Link AX1800 mesh Wi-Fi system, Wi-Fi 6, 2-pack

TP-Link AX1800 mesh Wi-Fi system, Wi-Fi 6, 2-pack

This Wi-Fi 6 mesh kit with two nodes may suit a workspace where the signal drops in several places.

The kit is described as supporting optional Ethernet backhaul between the units.

Joybuy
TP-Link Deco X50, Wi-Fi 6, dual-band, 3-pack

TP-Link Deco X50, Wi-Fi 6, dual-band, 3-pack

This three-node kit is worth considering if the Wi-Fi signal drops in several workspaces or on different floors.

The bands are 2.4 and 5 GHz. Each unit is listed with three gigabit ports and optional Ethernet backhaul; these aren’t 2.5G ports.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

This mesh router is worth considering if you’re looking at a Wi-Fi 7 setup; the product designation doesn’t measure upload speed.

The product description mentions multiple units working together, with setup and management via the SmartLife app.

Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

This mesh router is worth considering if you’re looking at a Wi-Fi 6 setup for your workspace.

The product description mentions mesh and roaming, with management via the Huawei AI Life app.

Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7 mesh system

Linksys Velop Pro 7 tri-band Wi-Fi 7 mesh system

The listed port combination may be useful if you want to connect several devices by cable at your workspace.

This Wi-Fi 7 system uses the 2.4, 5 and 6 GHz bands. The product details list two mesh units, one 2.5G Ethernet port and four gigabit ports.

Joybuy

Frequently asked questions

How can you tell whether mesh Wi-Fi could help with slow design uploads?

First, measure your upload speed using a computer connected to your home network with an Ethernet cable, then compare it with your Wi-Fi experience at your workspace. If the wired connection is slow too, look into your internet connection or contact your provider; mesh won’t increase its capacity. The Consumentenbond recommends testing over a wired connection.

Where should you put an extra mesh node?

Place the node somewhere it still has a usable connection to the network. Test the Wi-Fi at your workspace and take walls and floors into account. If you can use cabling, check whether your chosen kit supports Ethernet backhaul.

Do you need Wi-Fi 7 to upload design files?

Not necessarily: first find out whether Wi-Fi or your internet connection is limiting your upload. According to the Consumentenbond, Wi-Fi 6 remains a good-value choice for many consumers. Your devices need to support a newer Wi-Fi version to take advantage of its features.

What warranty applies to a mesh kit in the Netherlands?

When you buy as a consumer, the seller is responsible if the product doesn’t do what you could reasonably expect under normal use. According to ACM ConsuWijzer, your statutory rights aren’t automatically limited to any manufacturer’s warranty offered; what you could reasonably expect from the product matters.

What should you look for in the CE marking on a mesh system?

Radio equipment sold in the Netherlands must meet the applicable European requirements. The Dutch Authority for Digital Infrastructure states that manufacturers apply the CE marking when a product conforms. A CE statement on a sales page is not, on its own, an independent product assessment.