Start by noting where the screens are and checking the internet connection there. A higher theoretical Wi-Fi speed won’t guarantee smooth streaming if your broadband connection or the link to a mesh node is inadequate. If network cables are already in place, compare mesh with Ethernet backhaul against wired access points. If there are no cables, the position of each node and the wireless connection between them become especially important. Also check the ports, compatibility with your existing router and the guest access you need, as recommended by Consumentenbond, TP-Link Netherlands and the Netflix Help Centre.
Who is this option for?
A studio with screens in several areas
For a studio where streams need to be available at several workstations. The position of the Wi-Fi nodes and their connection to the network matter more than the speed quoted on the box alone. Consumentenbond recommends placing Wi-Fi nodes where coverage is needed.
A studio with existing network cabling
For anyone who can connect nodes or fixed screens by cable and wants to compare mesh with Ethernet backhaul against separate access points. TP-Link Netherlands describes Ethernet backhaul as a way to connect Deco units to each other.
A studio with visitors and an existing router
For anyone who wants to set up guest access and decide in advance which network functions will remain with the current router. Ubiquiti describes client isolation as one of the features available for guest networks.
What should you look for when buying?
| What to consider |
What should you check? |
Who is this important for? |
| Several streams at once |
Count the streams running at the same time and check the internet connection where the screens are. |
If several screens are streaming at once, I want to know whether the internet connection and Wi-Fi can cope at every workstation. Around 33% of consumers say simultaneous streaming is their top buying priority. |
| Coverage in each studio area |
Map out the screen locations and possible positions for the mesh nodes; test the connection where you’ll use them. |
If screens are spread around the studio, I want a usable connection in every area without relying solely on the advertised range. Around 27% of consumers prioritise coverage in different areas. |
| Existing cables and ports |
Count the connections needed at each location and check the ports on the exact model; see whether you’ll need a switch. |
If network cables are already in place, I want to use them for fixed devices or the connection between nodes. Around 20% of consumers give existing cabling and connections top priority. |
| Router and guest access |
Check the operating mode, which device manages DHCP and whether the guest isolation you need is available. |
If visitors use the studio network, I want to know how guest access will work with my current router. Around 20% of consumers prioritise network management and guest access. |
Buying pitfalls
-
Assuming the combined top Wi-Fi speed is the speed each screen will get
The quoted radio speed doesn’t show what a screen will achieve in its own location. Your broadband connection and how many devices are in use at the same time also matter. The Netflix Help Centre lists the number of devices streaming simultaneously as a factor affecting picture quality.
Check the connection where the screens are located and assess simultaneous streams separately.
-
Buying extra mesh nodes without planning the connection between them
Each node needs a connection back to the network. Ethernet backhaul is an alternative to a fully wireless connection between mesh nodes.
For each area, check whether a network cable is available and where a node could practically be placed.
A wired setup may require cables or a switch. You’ll also need to position and power any additional nodes.
-
Assuming access point mode keeps all router features
According to TP-Link Netherlands, in Deco access point mode the existing router remains responsible for DHCP, and some Deco app features aren’t available.
Before you buy, check which router will manage guest access, DHCP and any other network features you need.
Brands to compare
TP-Link
The Deco X50 is a mesh option to consider if you’re looking for Ethernet backhaul and several ports on each unit.
- TP-Link Netherlands lists three gigabit ports per Deco X50 unit and support for Ethernet backhaul.
- In access point mode, the existing router manages DHCP and some Deco app features aren’t available. The number of ports may vary by model.
ASUS
The ZenWiFi BD4 is a dual-band mesh option to compare if you’re looking for AiMesh compatibility and 2.5-gigabit ports.
- ASUS Netherlands specifies Wi-Fi 7 and two 2.5-gigabit ports per BD4 unit.
- The quoted top wireless speed isn’t a measure of streaming performance in a shared studio. Check the pack size of the model you choose.
FRITZ!
FRITZ!Mesh is an option to compare if you’re considering extending an existing FRITZ! network.
- Techboer included the Set 1700 as a three-pack in a review focused on home use.
- A home-focused ranking isn’t a test in a shared design studio. Check the exact model and how it connects to your current router.
Google
Nest Wifi Pro is an option to consider if you’re looking at a Wi-Fi 6E mesh system with a wired connection between nodes.
- Google Nest Help explains how Ethernet can be used to connect Nest Wifi Pro points to each other.
- Google Nest Help states that Nest Wifi Pro can’t be combined with older Nest Wifi or Google Wifi points in a single mesh network.
Ubiquiti
UniFi access points are an option to compare if you’re considering a wired network design with separate guest access.
- Ubiquiti documents guest network features, including client isolation.
- An access point isn’t automatically a complete consumer mesh kit. Check what network equipment and configuration you’ll need.
Joybuy products for mesh and wired access points
This selection includes mesh kits for workstations spread across different areas and a separate access point for a wired network design.
No image available
TP-Link Deco BE68 (2-pack)
A two-unit mesh kit to consider for coverage across several studio areas.
The product description lists tri-band Wi-Fi 7, MLO and multi-gigabit ports.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6
A mesh kit to consider if you want to spread Wi-Fi nodes across different studio areas.
The product description lists three gigabit ports per unit and optional Ethernet backhaul.
View at Joybuy
No image available
TP-Link Omada EAP653
A separate access point to consider for a planned, wired studio network.
The product description lists dual-band Wi-Fi 6, PoE and VLAN mapping.
View at Joybuy
No image available
TP-Link Deco XE75, tri-band Wi-Fi 6E
A mesh option to compare if you want to spread coverage across several workstations.
The product name lists tri-band Wi-Fi 6E.
View at Joybuy
No image available
TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6
A mesh kit to consider for several studio areas where you’re planning to use PoE cabling.
The product name lists dual-band Wi-Fi 6 and two Ethernet ports.
View at Joybuy
Frequently asked questions
How can you tell whether your internet connection can handle several screens?
Count how many screens will be streaming at once and consider the picture quality you want. Then check the connection where the screens are located. The Netflix Help Centre points out that the number of devices in use at the same time can affect picture quality.
Can you use Deco with your existing studio router?
Yes, Deco supports access point mode. According to TP-Link Netherlands, the main router then remains responsible for DHCP, and some advanced features in the Deco app aren’t available. Ethernet backhaul is still possible.
What should you check after installation?
Check that the nodes are reachable and that your preferred router and guest network settings are active. Test the connection again if you move any screens or Wi-Fi nodes.
What warranty applies if a studio buys the equipment?
The Netherlands Authority for Consumers and Markets describes the statutory guarantee that applies to sales to consumers. Don’t assume the same consumer rules apply when a business makes the purchase. Check who the contracting party is and ask about the service terms for that purchase.
What sales requirements apply to mesh Wi-Fi equipment in the Netherlands?
According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the market in the European Union must meet the applicable requirements and carry a CE marking. Check the marking on the model being offered; a product listing alone doesn’t prove that these requirements have been met.