If you can run cables to your Wi-Fi points, wired backhaul is a sensible option to explore: traffic between those points won’t need to travel over a wireless connection. If cables aren’t an option, you could consider tri-band mesh, but placement, internet speed and call quality in busy work areas will still be key. Choose managed access points when wired connections and control over guest access are important, and check what additional network equipment you’ll need.
Who is this relevant to?
A studio with lots of simultaneous calls
You want to know whether upload speeds and connections at workstations will remain adequate when several video calls are taking place at once. Zoom publishes bandwidth recommendations for different calls and video modes; TP-Link explains Ethernet backhaul for Deco.
A studio with workstations spread across the space
You want Wi-Fi in several areas and need to decide where to place your network points based on the available cabling and the connection between them. TP-Link describes the 6GHz band for connections between XE75 Deco units; Ubiquiti points out that wireless connections between access points can reduce available throughput.
A studio with visitors and shared equipment
You want to give visitors internet access without making the work network unnecessarily accessible. TP-Link describes guest networks for Deco; Ubiquiti outlines features such as client isolation for guest Wi-Fi.
What should you consider when choosing?
Mesh with wired backhaul
Best when: you can run cables to suitable node locations and want to avoid a wireless connection between the nodes. TP-Link describes Ethernet backhaul for Deco.
Bear in mind: running cables requires installation work. Your internet connection and the connection between your laptop and node can still be separate bottlenecks.
Wireless tri-band mesh
Best when: running cables to every node isn’t practical and you can place the nodes where they have a usable wireless connection to one another. For the Deco XE75, TP-Link lists the 6GHz band for connections between units.
Bear in mind: distance, obstacles and wireless hops still have an impact. The stated band specification doesn’t guarantee call quality in your studio. Ubiquiti explains that each wireless hop can reduce available throughput.
Managed access points with wired uplinks
Best when: wired placement and configurable separation between guests and studio equipment are important. Ubiquiti lists a 2.5GbE uplink and PoE+ for the U7 Pro.
Bear in mind: a standalone access point isn’t a complete network. Check whether you’ll also need a router, power supply, switch or additional access points.
| Consideration |
What should you check? |
Who is this important for? |
| Call quality |
Measure upload speeds and call quality at workstations during peak use; if needed, compare them with a computer connected by cable. |
If several calls are happening at once, I want to know whether upload speeds and connections will remain adequate at each workstation. Around 36% of consumers put call quality under simultaneous load first. |
| Coverage and backhaul |
Decide where to place the nodes, check cabling options and test the connection between wireless nodes. |
I want a connection at workstations across the studio and need to know whether the nodes communicate with each other by cable or wirelessly. Around 29% of consumers give coverage and backhaul top priority. |
| Guest access |
Check which isolation features are supported by your chosen equipment and operating mode, then test what a guest device can access. |
Visitors need internet access, but I want to keep studio equipment separate. Around 21% of consumers prioritise guest access and network separation. |
| Connection and setup |
Check your existing router, ports, cabling, power supply and preferred router or access point mode. |
I want to know what will connect to my existing network and which components or configuration I’ll need. Around 14% of consumers put connectivity and setup costs first. |
Common pitfalls
-
Assuming the combined Wi-Fi speed is available to every caller
Product specifications describe radio capabilities, but call quality also depends on upload speeds, placement and network load. A higher advertised Wi-Fi speed alone doesn’t tell you whether your internet connection can support several calls.
Measure available upload speeds and call quality during a busy period, and test the workstations where calls take place.
-
Adding wireless nodes without checking the connection between them
A node will only help a workstation if its connection to the rest of the network is usable too. Wireless hops can reduce available throughput.
Plan node locations and possible cable routes first; after installation, check which type of backhaul each node uses.
-
Assuming a guest network name means complete isolation
Guest access and separation between devices and networks are features that need to be configured separately.
Set up the isolation you need, then use a guest device to test which studio equipment can be accessed.
-
Taking consumer terms or included power supplies for granted
The terms may depend on the setup you choose and whether the studio purchase is mainly for business use. The power supply for an access point is another thing to check separately.
Check the package contents, power options and applicable business sales and service terms before ordering.
Brands to compare
TP-Link
The Deco range includes dual-band mesh, PoE models and tri-band mesh with 6GHz support. Features vary depending on the model you choose.
- TP-Link describes Ethernet backhaul for Deco and various installation and power options for the X50-PoE.
- Check the ports and the number of nodes included with each version. According to TP-Link, some advanced Deco features may not be available in access point mode.
ASUS
According to ASUS, the ZenWiFi XT9 is an AiMesh option with a 2.5GbE WAN port, guest network and router or access point mode.
- These connectivity and network features give you useful points of comparison when considering a setup.
- According to ASUS, WPA/WPA2-Enterprise isn’t available in AiMesh mode. Check which authentication method and operating mode you need for this model.
Ubiquiti
The UniFi U7 Pro is a managed access point for wired installation, where guest isolation may be important.
- Ubiquiti specifies a 2.5GbE uplink and PoE+ for the U7 Pro.
- One access point on its own isn’t a complete mesh or router system. Check which router, power supply, switch and other access points you’ll need.
NETGEAR
The Orbi 770 series is a tri-band mesh option with Wi-Fi 7 to compare if you’re looking at a complete set.
- The series offers a separate mesh option for anyone considering tri-band and Wi-Fi 7.
- Stated speeds, coverage and capacity are manufacturer claims, not measurements of simultaneous video calls in this studio. Check the exact set and connections.
eero
The eero 6+ is a dual-band mesh option. According to eero, an eero 6+ router can also be used as a node in an existing eero network.
- The option to expand your network may be useful if you already use eero.
- According to eero, the standalone eero 6+ Extender doesn’t have Ethernet ports, unlike the eero 6+ router. Check what’s included in the set if you need wired connections.
Joybuy products
These products offer tri-band mesh or mesh with wired connections, for studios considering wireless or wired links between network points.
No image available
TP-Link Deco BE68 (2-pack)
An option to compare if you’re considering several network points and both wired and wireless backhaul.
Tri-band mesh with Wi-Fi 7 and 6GHz support; the set contains two units. The product description lists 1, 2.5 and 10 Gbps Ethernet ports.
Joybuy
No image available
ASUS ZenWiFi BT8 (2-pack)
An option to compare if you want to combine tri-band mesh with wired connections at your network points.
The product listing mentions Wi-Fi 7, tri-band on 2.4, 5 and 6 GHz, and 1 and 2.5 Gbps Ethernet ports.
Joybuy
No image available
Linksys Velop Pro 7
An option to compare for a tri-band mesh setup with several network points and Ethernet connections.
The product listing mentions Wi-Fi 7, 2.4, 5 and 6 GHz bands, 1 and 2.5 Gbps Ethernet ports and two mesh units.
Joybuy
No image available
TP-Link Deco XE75 (3-pack)
A tri-band mesh option to compare if you can place nodes wirelessly or use available Ethernet connections.
The product listing mentions Wi-Fi 6E, 6 GHz, three units, three Gigabit Ethernet ports per unit and a guest access feature. The product description states that the system is for indoor use only.
Joybuy
No image available
TP-Link Deco X50-PoE (3-pack)
A mesh option to compare if you want to connect your network points by cable and are considering PoE power.
The product listing mentions dual-band Wi-Fi 6, PoE, two Ethernet ports per unit and a guest access feature. Check which compatible PoE power supply your setup requires.
Joybuy
Frequently asked questions
How can I tell whether my internet connection can handle several video calls?
Measure available upload and download speeds during your busiest period, and check call quality at each workstation. Zoom publishes bandwidth recommendations for different calls and video modes. Don’t simply multiply them to calculate guaranteed capacity, as usage and network conditions vary.
Can mesh Wi-Fi work behind my existing provider router?
Yes. TP-Link describes how to connect Deco to an existing router and use access point mode. In this mode, the main router manages the clients, and some advanced Deco features aren’t available. Check which features you need in advance.
How do I check my Wi-Fi setup after installation?
Check which connection each node is using and test calls at different workstations. TP-Link explains how to check a Deco node’s backhaul in the app; the Authority for Consumers and Markets (ACM) highlights the importance of updates for your own network equipment.
What extra equipment and terms should a studio check?
Check whether your chosen setup needs cables, a switch or a compatible power supply. ACM ConsuWijzer says that consumer protection doesn’t apply when a contract is used mainly or exclusively for business. Make sure you read the terms that apply to your purchase.
What rules apply to Wi-Fi and radio equipment in business premises in the Netherlands?
According to the Dutch Authority for Digital Infrastructure, Wi-Fi in business premises is licence-exempt if you use the designated frequencies and follow the conditions of use. Radio equipment sold in the Netherlands must meet the applicable European requirements and carry a CE mark. Check that the version you’re considering is suitable.