Who is this guide for?

Presenter with weak Wi-Fi at the end of the corridor

You want to find out where an intermediate node can still get a usable connection before buying extra nodes.

User with a network cable in the corridor

You can connect a node by cable and want to set up the connection between mesh nodes to suit your needs.

Presenter who can’t find the screen

You want to find out whether the problem is with Wi-Fi reception or with how your device and the screen are connected to the network.

What should you look for when choosing?

Wireless mesh system

Choose this option if: there’s no cable, but you can find an intermediate spot where the node still gets good reception.

Bear in mind: placement and obstacles. A node in a spot with no usable incoming signal isn’t a reliable solution.

Mesh with ethernet backhaul

Choose this option if: there’s a usable ethernet connection at the end of the corridor and you can connect the nodes by cable.

Bear in mind: the cable route and connection method. Check that the system’s ports and settings are compatible with your router.

Extending an existing FRITZ! mesh

Choose this option if: you already use a compatible FRITZ!Box as your mesh master and can connect a suitable FRITZ!Repeater.

Bear in mind: the requirements for the FRITZ! devices you’re using, the LAN connection and FRITZ!OS.

Check the screen connection first

Choose this option if: your device has Wi-Fi at the presentation spot, but can’t find the screen.

Bear in mind: checking the network won’t fix a genuinely weak signal. Miracast also has its own requirements for devices.

Consumentenbond recommends placing Wi-Fi nodes with as few obstacles between them as possible. So check the connection at the spots you have in mind, rather than relying solely on a quoted home coverage area.

Concern What to look for when buying Who is this important for?
Usable coverage at the presentation spot Check the connection where you plan to place each node, and test it with your presentation devices at the end of the corridor. If I’m presenting at the back of the corridor, I want to know whether a node will still get usable reception there before I buy extra nodes. Around 36% of consumers put coverage at the presentation spot first.
Connection between mesh nodes Check whether ethernet backhaul is possible and how the nodes need to connect to your router or network equipment. If I have a network cable running towards the end of the corridor, I want to know whether I can use it to connect the nodes to each other. Around 29% of consumers say this is their top priority.
Being able to find the presentation screen Find out whether you use Google Cast or Miracast. For Google Cast, check the network and local network access. If my device has Wi-Fi but the screen doesn’t appear, I want to check network access and the presentation method first. Around 21% of consumers put screen discoverability first.
Managing and using extra nodes Check which features are available in the mode you choose, and factor in any cables and power sockets you’ll need, as well as ongoing power use. If I want to extend my existing network without unnecessary nodes or features, I look at how it’s managed and what the setup needs in day-to-day use. Around 14% of consumers say this is their top priority.

Common pitfalls

  • Assuming a coverage claim guarantees coverage in a long corridor

    The connection depends on where the nodes are placed and on any obstacles. A quoted home coverage area doesn’t necessarily tell you how good reception will be at the end of your corridor.

    Plan where to put the nodes and check the connection between them and at the presentation spot before deciding to extend your network.

  • Buying another node when the screen still can’t be found

    With Google Cast, the sending and receiving devices need to be able to find each other on the local network. Adding another Wi-Fi node won’t automatically fix a network access problem.

    Check the network, local network access and any settings for shared guest devices first.

  • Assuming mesh nodes are interchangeable

    The FRITZ! mesh setup described here requires a compatible FRITZ!Box as the mesh master. Backhaul connection requirements may vary depending on your setup.

    Check the exact model of your existing router and the documented connection method before choosing an extension.

Brands to consider

TP-Link

Deco is a standalone mesh option. According to TP-Link, the Deco X50 in the Netherlands is available in one-, two- and three-node versions.

  • TP-Link describes ethernet backhaul and connection in router and access point modes. For the Deco X50 in the Netherlands, the manufacturer lists three gigabit ports per node.
  • Some advanced Deco features aren’t available in access point mode. Quoted speeds and home coverage areas don’t tell you what coverage will be like in your corridor.

ASUS

The ZenWiFi XD5 is a standalone mesh option for wireless placement or connection to existing ethernet connections.

  • ASUS describes ethernet backhaul and the option to use one network name or separate names for each frequency band.
  • These features don’t tell you what speeds you’ll get at the presentation spot. Check the connection at the locations you have in mind.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend a compatible existing FRITZ!Box mesh.

  • According to FRITZ!, the repeater has two gigabit LAN ports. A compatible repeater can be added to FRITZ! mesh as a LAN bridge.
  • The extension described here isn’t necessarily compatible with other mesh brands. Check the requirements for the LAN connection and FRITZ!OS.

NETGEAR

The Orbi 370 series is a standalone dual-band mesh option for those also considering 2.5-gigabit connections.

  • NETGEAR lists dual-band Wi-Fi 7 and 2.5-gigabit ethernet for the Orbi 370 series.
  • Quoted coverage and performance apply to the configurations in question and haven’t been measured at your presentation spot. Check the placement too.

Joybuy product picks

This selection includes mesh systems with two or three nodes, including options for a wired connection between nodes. Check the connection at the locations you have in mind and make sure the connection method suits your existing network.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

An option to consider if you’re looking for a two-node mesh system with wired backhaul.

View at Joybuy
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

A two-node mesh system to consider if you want to explore wireless placement.

The product name specifies tri-band on 2.4, 5 and 6 GHz, and Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A two-node option to consider if you’re looking for a mesh setup that supports ethernet backhaul.

The product name specifies Wi-Fi 6.

View at Joybuy
TP-Link Deco M4 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 3-pack, dual-band Wi-Fi 5

A three-node option to consider if, after checking placement, you decide you need more nodes.

The product name specifies dual-band, 2.4 and 5 GHz, and Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

A three-node option if you want to assess several possible placements. Check the connection at every spot you have in mind.

The product name specifies dual-band, 2.4 and 5 GHz, and Wi-Fi 6 (802.11ax).

View at Joybuy

Frequently asked questions

Where should you place an extra Wi-Fi node?

Don’t place a wireless node only where the existing signal has already dropped out. Consumentenbond recommends having as few obstacles as possible between Wi-Fi nodes. If coverage is weak, try an intermediate spot, then check the connection by the screen.

Can you connect Deco to your existing router without using Deco’s router function?

Yes. TP-Link describes an access point mode with ethernet backhaul. The main router then manages the clients, and some advanced features aren’t available in the Deco app. Check which features you need beforehand.

Why can’t your device see the presentation screen when Wi-Fi is working?

With Google Cast, the sending device and receiver need to be on the same accessible Wi-Fi network, and the app needs local network access. Google Streaming Help also explains settings for shared devices on a guest network. If you use Miracast, check that both your laptop and screen support it.

What should you check about power use and additional requirements?

Factor in any cables you’ll need and the power use of nodes that stay switched on continuously. Also check the warranty and returns terms for the exact product on offer.

Do you need a permit or registration for normal Wi-Fi use in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi use on the designated frequencies and under the conditions of use is licence-exempt; licence-exempt use of frequencies does not require notification or registration. Radio equipment placed on the market in the Netherlands must also meet the relevant European product requirements. When buying, check the CE marking on the exact device on offer.