First, check whether the weak connection starts in the loft or is already present at your internet connection point. If you can run an Ethernet cable upstairs, a mesh node with wired backhaul is a sensible option. Without a cable, wireless mesh can work if the node in between still has a good connection. Also check your router’s connection mode, the ports on the exact kit you’re buying and the CE marking on the version actually supplied.
Who is this guide for?
Workshop host with a weak loft signal
You want to stay connected for video, audio and interaction in your converted loft. The Consumentenbond recommends placing Wi-Fi points where you want to boost the signal; TP-Link warns that actual coverage also depends on your surroundings.
Homeowner with a cable to the loft
You can connect a network point upstairs and are looking for a suitable wired connection between the mesh points, with enough ports for your devices. TP-Link explains how to connect a Deco satellite by cable.
Homeowner with an existing provider-supplied modem
You want to extend your coverage without accidentally creating a second router network. TP-Link sets out different connection rules for Deco in router and access point modes; check the manual for the version you choose.
What should you look for?
Compare the connection in the loft with the one at your internet connection point before choosing your equipment. ACM ConsuWijzer recommends using a computer connected by Ethernet close to that point, among other things, for a reliable internet speed test.
Mesh with Ethernet backhaul
Choose this if: there’s a usable network cable to the loft, or you can run one.
The trade-off: the connection between the mesh points runs over the cable, but you’ll need to check the cable route, ports and connection mode.
Fully wireless mesh
Choose this if: running a cable isn’t practical and you can place an intermediate point where it still has a good connection to the other point.
The trade-off: you can position the point more flexibly, but a point in an existing dead zone may also have a weak connection.
Cable straight to the workshop computer
Choose this if: you mainly need to connect one computer in the loft and can run a cable to it.
The trade-off: the computer won’t use Wi-Fi, but that won’t automatically improve wireless coverage for your other devices.
Powerline as an alternative to test
Choose this if: running a cable isn’t practical and the wireless connection between floors proves weak.
The trade-off: TP-Link describes the Deco PX50 as a system that connects the points over your mains wiring; you’ll need to assess how well it works in your own electrical installation.
| What to consider |
What should you check? |
Who is this important for? |
| Coverage and positioning |
Test the connection between the points in the places where you plan to position them. With wireless backhaul, the intermediate point still needs to connect to the other point. |
If I need video and audio in the loft, I want to know whether the signal reaches across the floors. Around 36% of consumers make loft coverage their top priority when buying. |
| Cause of connection problems |
Compare with repeated tests close to the connection point, preferably using a wired connection. Also check the requirements of the workshop service you use. |
If my workshop connection keeps dropping, I first want to find out whether the problem is the loft Wi-Fi or the internet connection itself. Around 29% of consumers want to pinpoint the cause of interruptions to video and audio first. |
| Connection to your modem |
Check the router or access point mode, the connection sequence and how many Ethernet ports you need for backhaul and your computer. |
If I want to keep my provider-supplied modem, the mesh kit needs to connect to it without accidentally creating a second router setup. Around 21% of consumers prioritise compatibility with their existing network equipment. |
| Version and running costs |
Check what’s included, which security features are optional and what connections the exact kit has. Also check the CE marking on the version supplied. |
If I want to avoid unnecessary spending, I want to know which features and connections I really need. Around 14% of consumers put total costs and avoiding extra spending first. |
Common buying mistakes
-
Placing an extra point right in the dead zone
A wireless mesh point needs its own connection to the rest of the network. If it’s in a spot where that connection is already weak, it may not be able to restore the connection in the loft.
Check the connection where you plan to place it. Consider wired backhaul if the floor weakens the wireless connection between points.
You may still need an extra point or to run a cable.
-
Taking claimed coverage as a measure of loft performance
TP-Link says that actual throughput and coverage can vary due to factors including building materials, obstacles and devices.
Check both the connection where you’ll use your workshop and the connection between the mesh points. Don’t base your decision on the figures on the box alone.
-
Not checking the ports and operating mode
Not every mesh point has Ethernet ports, and with Deco, the right way to connect it also depends on the mode you choose.
Count the ports you need for backhaul and your computer, and follow the manual for the exact version.
Depending on your setup, you may need a different kit or to run an additional cable.
-
Confusing the manufacturer’s warranty with optional features
A manufacturer’s warranty and optional security features are two different things. ACM ConsuWijzer also makes clear that your statutory rights are separate from a manufacturer’s warranty.
Check which software features are included as standard and look into any additional warranty services separately.
Some HomeShield Pro features may incur extra costs.
Brands to compare
TP-Link
The Deco X50 is a mesh range worth considering if you need wired backhaul or multiple Ethernet ports. TP-Link also lists the Deco PX50 as an alternative that connects the points over your mains wiring.
- TP-Link lists three gigabit ports on each Deco X50 point.
- The stated coverage isn’t a measurement in your home. Some HomeShield Pro features may incur a charge.
ASUS
The ZenWiFi BD4 may be worth considering if you’re specifically looking for higher-rated Ethernet port speeds or an access point mode.
- ASUS lists two 2.5GbE ports per BD4 point and an access point mode.
- The BD4 is dual-band; radio speeds don’t prove how well it will perform for a workshop in a loft. Package contents may vary by region.
eero
eero systems are worth considering if you’re weighing up wireless and wired connections between mesh points.
- According to eero, compatible eero points can be connected via Ethernet.
- Not every model has Ethernet ports: eero lists the Beacon and 6 Extender as exceptions.
FRITZ!
Techboer included the FRITZ!Mesh Wi-Fi Set 1700 (3-pack) in its ranking for larger homes on 21 October 2026. That reflects the publisher’s positioning, not a performance test for a workshop in a loft.
- The set mentioned is an option to compare if you’re looking for a mesh kit with three points.
- Check the connection options and exact version before deciding whether it’s right for your cable route.
Joybuy products
These mesh systems are relevant if you’re looking to extend Wi-Fi coverage to a converted loft. Check the ports, operating mode and CE marking on the device supplied for each version.
No image available
TP-Link Deco BE68 (2-pack)
Worth considering if you’re looking at a mesh setup with wired backhaul; check which ports and connection mode are available on this version.
View at Joybuy
No image available
ASUS ZenWiFi BT8 (2-pack)
Could be a good fit if you’re looking for a mesh kit with Ethernet ports on each point; check the port layout on this version for your wired setup.
Tri-band; 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be).
View at Joybuy
No image available
ASUS ZenWiFi BD4 (2-pack)
One to compare if you want to use wired backhaul; check the ports and connection mode on this exact kit.
Dual-band; 2.4 GHz and 5 GHz; Wi-Fi 7 (802.11be).
View at Joybuy
No image available
TP-Link Deco M4 (3-pack)
The three-station version may be useful if you want to cover several areas of your home; check that its connection options suit your chosen backhaul.
Dual-band; 2.4 GHz and 5 GHz; Wi-Fi 5 (802.11ac).
View at Joybuy
No image available
TP-Link Deco X50 (3-pack)
Worth considering if you want to use Ethernet backhaul between Deco points; check the ports and connection rules for your chosen mode.
Dual-band; 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax).
View at Joybuy
Frequently asked questions
Does the second mesh point need to be in the loft?
Not necessarily. With a wireless connection, the point still needs a good connection to the other point, so try a spot with as few obstacles between them as possible. If you have a cable running upstairs, you can choose a position that focuses more on the coverage you want in the loft.
How can I check whether mesh will solve my workshop connection problem?
Compare the connection in the loft with repeated tests close to your internet connection point. ACM ConsuWijzer recommends using an Ethernet cable at that connection point for a reliable test, among other things. If the connection is already poor there, an extra Wi-Fi point won’t fix it by itself.
Can I use mesh with my existing router?
That depends on the system and the operating mode you choose. For Deco, TP-Link describes router and access point modes, with different connection rules for wired satellites. Follow the manual for the exact kit.
What should I look out for with security and maintenance?
Keep your router up to date, use a strong password and secure your Wi-Fi network; these are the Consumentenbond’s recommendations. Also check which security features are included with your version and which require an optional paid subscription.
Do I still have rights after the manufacturer’s warranty expires?
Your statutory rights don’t automatically end when the manufacturer’s warranty expires. According to ACM ConsuWijzer, your statutory rights may apply for as long as you could reasonably expect the product to last under normal use; the retailer is your point of contact.
How do I check the CE marking on a mesh kit?
Check the version actually supplied rather than relying on the model name alone. The Rijksinspectie Digitale Infrastructuur states that radio equipment must carry the correct CE marking and advises against using equipment without the correct marking.