Which clubs is this for?

Clubs with an archive that has no Wi-Fi

These clubs want to know where an additional node can still connect to the existing network, and whether the signal can then reach the archive. The Consumers’ Association and the Dutch Authority for Digital Infrastructure identify placement and coverage as relevant considerations.

Clubs with an Ethernet cable to the archive

A wired connection may be appealing if the club doesn’t want the link between nodes to rely on wireless backhaul. TP-Link and eero describe Ethernet backhaul for suitable mesh setups.

Clubs with restricted archive data

If the archive contains personal data, clubs should consider not only Wi-Fi coverage but also who has access. The Dutch Data Protection Authority explains security and access rights for personal data.

What should you look for when choosing?

Wireless mesh backhaul

Choose this when: there’s no cable and there’s a suitable spot in the corridor with a strong signal.

Consider: obstacles and node placement affect the connection; test by the archive door and inside the archive.

Ethernet backhaul

Choose this when: there’s an Ethernet cable, or one can be installed, to a suitable location near the archive.

Consider: cables and any switches need to be installed; also check the connection mode and backhaul support of the units you choose. TP-Link describes different ways to connect Deco in router and access point modes.

Mesh nodes with PoE

Choose this when: there’s a suitable Ethernet cable but no convenient power socket near the desired installation point.

Consider: the model must support PoE, and the power supply must be suitable for that version. TP-Link lists PoE and wall and ceiling mounting for the Deco X50-PoE; these features aren’t automatically available on the standard Deco X50.

Consideration What to check when buying Who is this most important for?
Coverage in the archive Check whether the system can be expanded, and test the connection between the nodes, by the archive door and inside the archive. If I mainly need access in the archive, I want to know whether the intermediate node itself still has a good connection. Around 36% of consumers give coverage at the archive location their highest priority.
Connection between the nodes Check the cable route, Ethernet ports, backhaul support and configured connection mode. If the wireless connection through the corridor is unstable, I want to know whether I can connect the nodes by cable. Around 29% of consumers are most concerned about the reliability of this connection.
Access to archive data Check whether the archive contains personal data, and review both network access and permissions in the archive application. If the archive contains personal data, I want to know who can access it; Wi-Fi security alone doesn’t control permissions in the application. Around 21% of consumers put access security first.
Costs and management Compare the number of nodes you need, the power supply, included features and any subscriptions. If I need a connection for the archive, I don’t want extra nodes or features to manage if they aren’t needed for that purpose. Around 14% of consumers give purchase and management costs their highest priority.

Common buying mistakes

  • Treating the advertised coverage area as a guarantee

    Building materials, obstacles and device locations all affect the actual coverage. A figure on the packaging won’t tell you whether the archive will get a connection in this corridor.

    Test the intended locations and check the connection in the archive before deciding how many nodes you need.

  • Putting the last wireless node in a dead zone

    A node may broadcast Wi-Fi even when its connection back to the network is weak; devices nearby won’t automatically get a usable connection.

    Place the node where it can still receive a signal, then check the connection between the mesh nodes after installation. Consider Ethernet backhaul if there’s a suitable cable route.

  • Confusing the standard Deco X50 with the Deco X50-PoE

    TP-Link lists PoE and specific mounting options for the X50-PoE; these features aren’t automatically included with the standard X50.

    Check the full model name, version, connections and compatible power supply before choosing a system.

  • Securing Wi-Fi access alone

    If the archive contains personal data, securing the network doesn’t replace setting access permissions for the data itself.

    Decide who can access the archive data and set permissions separately in the archive application. The Dutch Data Protection Authority emphasises the importance of appropriate security and access rights.

Brands to consider

TP-Link

The Deco range includes expandable mesh options. The Deco X50-PoE is designed for situations where PoE power and wall or ceiling mounting are suitable.

  • TP-Link lists three gigabit ports per unit for the standard Deco X50. For the X50-PoE, TP-Link lists PoE and two 2.5 Gbps ports.
  • Advertised coverage doesn’t guarantee a signal in this corridor. The standard X50 and X50-PoE are different versions.

ASUS

The ZenWiFi BD4 is a dual-band mesh option with Wi-Fi 7 and AiMesh.

  • ASUS lists wired backhaul as an option and two 2.5 Gbps Ethernet ports for the BD4.
  • Wi-Fi 7 or an advertised total speed doesn’t prove that the signal will travel better through the corridor. Check the version and the plugs supplied with the system you choose.

eero

eero describes systems that support wireless or wired connections between compatible units.

  • The manufacturer documents Ethernet backhaul for compatible eero units.
  • Not every eero model has an Ethernet port. According to eero, certain advanced features don’t work well in bridge mode; check that the mode you choose supports the features you need.

Linksys

The Velop Pro 6E is a tri-band mesh option with wired and wireless backhaul.

  • Linksys lists a 6GHz band and gigabit connections for this model.
  • The extra band doesn’t prove that the connection will be better through this long corridor; assess placement and backhaul first.

Mesh systems at Joybuy

This selection includes mesh systems for wired connections between nodes, PoE-powered nodes and setups with multiple mesh units. The right option depends on the cable route, your existing router and where you can place a node near the archive.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

Worth considering if you can run an Ethernet cable to a mesh node near the archive.

The set includes 2 nodes and lists both wired and wireless backhaul. Each unit has 10 Gbps, 2.5 Gbps and 1 Gbps ports; test the coverage at the site.

View at Joybuy
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack

A mesh option with 2 nodes to consider if you use compatible ASUS equipment.

The product description lists tri-band, Wi-Fi 7 and AiMesh compatibility. Check the connection you need and test whether the chosen location reaches the archive.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4

Worth considering if you can connect a mesh node by cable near the archive.

The product description lists Wi-Fi 7 and wired backhaul as an option. This doesn’t predict coverage in the corridor; check how it connects to your existing router.

View at Joybuy
TP-Link Deco M4 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 3-pack

Worth considering if you want to place several mesh nodes and would find help with installation and choosing their locations via the Deco app useful.

The product description lists three stations that form a single network, with Wi-Fi 5. Once installed, check that the connection in the archive is usable.

View at Joybuy
TP-Link Deco X50-PoE 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE 2-pack

Worth considering if there’s a cable route but no convenient power socket where you want to place the node.

The product description lists PoE, Wi-Fi 6 and two Ethernet ports per unit. Check which compatible PoE power supply suits the version you choose, and test the placement in the archive.

View at Joybuy

Frequently asked questions

Where should you place an additional node if there’s no signal in the archive?

Place the node somewhere it can still connect to the existing network, then test the connection in the archive. If a cable is available, you can connect a unit near the archive using Ethernet backhaul, provided the system you choose supports it.

Can a mesh system work behind the club’s existing router?

It depends on the system and its configuration. TP-Link describes different ways to connect Deco in router and access point modes; choose the right mode and follow the corresponding connection instructions.

Does a mesh system always include PoE?

No. Check whether the exact model supports PoE and which compatible power supply it needs. TP-Link lists PoE for the Deco X50-PoE; don’t assume this feature is available on the standard X50.

Are advanced security features always available at no extra cost?

No, availability varies by provider and operating mode. eero lists security features that are available separately and notes that some features are limited in bridge mode; check the terms for the specific model.

Does a club in the Netherlands need a frequency licence for ordinary Wi-Fi?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi is licence-exempt under the applicable conditions, with no notification or registration requirement. Check that the equipment and country settings you use are intended for the Netherlands.

Is a stronger Wi-Fi network enough to protect personal data in the archive?

No. If the club processes personal data, it must protect it properly, according to the Dutch Data Protection Authority. Also decide who can access the archive application; Wi-Fi coverage or a guest network alone doesn’t replace those access permissions.