Who is mesh Wi-Fi suitable for?

Someone who works from home and uploads photos at the same time

You want to stop a large upload from disrupting your video call. Compare the connection with and without an upload, then check whether traffic prioritisation is available in the mesh mode you’ve chosen. Google Meet recommends temporarily pausing large uploads if you’re having connection problems.

Someone with a weak signal in their workspace

If your call mainly drops out in a particular room or on another floor, consider where to place the Wi-Fi points and how they connect to each other. The Consumers’ Association (Consumentenbond) notes that equipment placement matters when boosting Wi-Fi. A stated top speed alone doesn’t tell you how well the connection will work in your workspace.

Someone with existing network cables

You may be able to connect Wi-Fi points by cable and use them alongside your current router. Check the ports and the mode you’ve chosen: TP-Link states that certain Deco gateway features, including QoS, aren’t available in the Deco app when using access point mode.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Calling while uploading Compare with and without an upload, both close to the router and where you make calls. Check where prioritisation is set. If I’m uploading a photo album and making a video call at the same time, I want the call to remain usable. Around 36% of consumers put call continuity first.
Coverage where you make calls Test the rooms where you make calls and compare the number of points and where you could place them. If my connection mainly drops out in my workspace, I want a usable Wi-Fi signal there. Around 29% of consumers give coverage where they make calls top priority.
Connection between points Check whether you can use Ethernet; if not, compare the wireless backhaul and bands supported by the exact model. If I can run cables between the points, I want to know which wired connection is suitable. Without cables, I’ll look at the wireless connection. Around 21% of consumers put the connection between points first.
Setup and management Check which app you need, how the system works behind your router and which features remain available in that mode. I want to keep using my provider’s router without unexpectedly losing management features. Around 14% of consumers give setup and management top priority.

Common buying mistakes

  • Confusing fast Wi-Fi with a fast internet upload

    The stated Wi-Fi speed doesn’t automatically tell you the upload speed of your internet connection. A mesh system can’t make up for a lack of upload capacity.

    Test the connection with and without an upload before choosing a model based only on its Wi-Fi generation or speed rating.

  • Expecting QoS to work in every Deco mode

    TP-Link states that gateway features such as QoS aren’t available in the Deco app when using access point mode.

    Decide in advance whether your existing router will continue to manage the network, and check which device lets you prioritise your call.

  • Assuming Wi-Fi 7 also means 6 GHz

    ASUS describes the ZenWiFi BD4 as a dual-band system with 2.4 and 5 GHz bands. TP-Link’s Deco XE75 also has a 6 GHz band, so the Wi-Fi generation alone doesn’t tell you which bands a model uses.

    Compare the bands and ports on the exact version rather than relying on the Wi-Fi label alone.

  • Assuming mesh points are interchangeable

    Google states that Nest Wifi Pro can’t form a single mesh network with older Nest Wifi or Google Wifi points.

    Before buying, check whether your existing points are compatible with the system you want to add.

Brands to compare

TP-Link

The Deco X50 and XE75 offer different options for connecting mesh points.

  • TP-Link specifies optional Ethernet backhaul and three gigabit ports per point for the X50.
  • According to TP-Link, the XE75’s 6 GHz band can be used to connect points.
  • A wireless 6 GHz connection doesn’t guarantee better performance through walls or floors. Certain gateway features, including QoS, aren’t available in the Deco app when using access point mode.

ASUS

The ZenWiFi BD4 is a dual-band system for anyone also weighing up the ports and the option of a wired setup.

  • ASUS specifies two auto-detecting 2.5-gigabit WAN/LAN ports and an access point mode.
  • According to ASUS, the BD4 uses 2.4 and 5 GHz bands and doesn’t have a separate 6 GHz band. Check the exact package variant.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Set 1700 is designed to extend an existing router or modem. The two-piece set includes two FRITZ!Repeaters 1700.

  • The manufacturer lists compatibility with an existing router and automatic updates.
  • This information doesn’t show that the set performs better than other systems when uploading photos and making video calls at the same time. Check how many units you need and how they connect.

Google

Nest Wifi Pro is a mesh option for anyone considering Google Home controls and device prioritisation.

  • Google documents a device prioritisation setting.
  • According to Google, Nest Wifi Pro can’t be combined in the same mesh network with older Nest Wifi or Google Wifi points. Setup requires a Google Account and a compatible phone.

NETGEAR

The Orbi 770 range is a tri-band system for anyone looking into multiple points and 2.5-gigabit connections.

  • NETGEAR lists a 2.5-gigabit internet port and an option for wired backhaul.
  • Stated coverage and maximum Wi-Fi speed are manufacturer claims. They don’t prove that this system is necessary for uploading an album while making a video call.

Joybuy products

These Joybuy products are mesh systems for households weighing up coverage, the number of Wi-Fi points or the connection between them.

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack)

A two-point mesh system to consider if this number of points suits your home.

Tri-band with 2.4, 5 and 6 GHz bands; Wi-Fi 7 (802.11be).

View at Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4

An option to compare if you’re considering wired backhaul and the ports on the mesh points.

Dual-band on 2.4 and 5 GHz; Wi-Fi 7 (802.11be). ASUS specifies two 2.5-gigabit ports per point and an access point mode. This model doesn’t have a separate 6 GHz band.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A three-point set to consider if you want to connect several areas of your home. According to TP-Link, wired backhaul is an option.

Dual-band Wi-Fi 6 (2.4 and 5 GHz). TP-Link specifies three gigabit ports per point.

View at Joybuy
TP-Link Deco XE75 (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 (3-pack)

A three-point set to compare if you’re considering a wireless connection between points. TP-Link says the 6 GHz band can be used for backhaul; performance depends on your home setup.

Tri-band Wi-Fi 6E (2.4, 5 and 6 GHz). The product specifications list three gigabit ports per point.

View at Joybuy
TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack)

A two-point set to consider if two mesh points suit the areas you want to cover. TP-Link lists Ethernet backhaul as an option.

Dual-band Wi-Fi 6 (2.4 and 5 GHz). TP-Link specifies three gigabit ports per point.

View at Joybuy

Frequently asked questions

How can I tell whether mesh will help if my call drops out during a photo upload?

Compare the call with and without an upload, first close to the router and then where you usually make calls. If the call mainly drops out in that spot, it’s worth looking into local Wi-Fi coverage. If the problem continues even close to the router, check the upload connection first. Google Meet recommends pausing large uploads as a step to try when you’re having connection problems.

Can I use mesh with my provider’s router and prioritise my call?

That depends on the model and the mode you choose. TP-Link supports access point mode for Deco behind an existing router, but states that gateway features such as QoS aren’t available in the Deco app in this mode. So, check which router can set the priority.

Do I need to connect mesh points with a cable?

No, a cable isn’t always necessary: TP-Link lists both wireless connections and optional Ethernet backhaul for the Deco X50. If you can use cables, compare that setup with wireless backhaul. If you place the points wirelessly, test whether the more distant point has a usable connection where you plan to put it.

What should I consider for ongoing use and support after buying?

Consider how many points will be switched on continuously, and check what firmware support and setup app come with your chosen system. The Consumers’ Association (Consumentenbond) includes energy use in its Wi-Fi tests. In the Netherlands, statutory guarantees for faulty products are separate from any manufacturer’s or retailer’s guarantee. ACM ConsuWijzer advises customers to contact the retailer.