Who might benefit from mesh Wi-Fi in this situation?

Viewer whose picture keeps buffering beyond the kitchen

You want to find out exactly where the signal drops out, then position a mesh point that still has a good connection to the network. The Consumers' Association recommends testing with a wired connection. The Dutch Authority for Digital Infrastructure points out that 5 GHz has a shorter range than 2.4 GHz.

Resident who can run a cable

You can connect the mesh points using Ethernet and want to rely less on a wireless connection running past the kitchen. TP-Link Netherlands explains how to use Ethernet backhaul with compatible Deco systems.

Resident with an existing provider router

You want to keep your existing network and find out in advance how to connect the main mesh point and which mode is suitable. According to TP-Link, the main Deco mesh point cannot connect wirelessly to your existing router as a repeater.

What should you look for in mesh Wi-Fi?

First, test the connection at your router using a cable. Then decide whether you need better coverage where you watch, a suitable connection between mesh points, or compatibility with your existing network.

What to consider What should you check? Who is this most important for?
Stable picture where you watch Compare a wired test at the router with the Wi-Fi connection near your screen. Check that the mesh point itself still has a usable connection. If my documentary keeps buffering in the room beyond the kitchen, I mainly want the picture to stay stable there; around 40% of consumers prioritise a stable picture in that spot.
Connection between mesh points Check whether Ethernet is an option. If you don't have a cable, you can test the wireless connection. Powerline requires compatible points and a suitable electrical installation. If I can run a cable, I want to use it for the connection between rooms; around 30% of consumers prioritise the connection between mesh points.
Connection to your provider router Check which physical connection you need and whether access point or router mode is right for how you want your existing router to work. If you want to keep using your provider router, you'll want to know in advance how the main mesh point connects to it; around 20% of consumers prioritise how the system fits into their network.
Number of points needed and usage Compare how many mesh points you need and what installation involves. Don't focus only on the stated Wi-Fi version or theoretical top speed. If I need extra points or installation, I also want to factor in usage and the equipment required; around 10% of consumers prioritise the total cost.

Common buying mistakes

  • Upgrading to a more expensive package without testing the wired connection first

    A slow provider connection and a weak wireless connection inside your home call for different solutions. A mesh system won't automatically fix a poor connection at the router.

    Compare a wired test at the router with the connection near your screen before changing your package.

    A more expensive package can mean ongoing costs without fixing a local Wi-Fi problem.

  • Putting a mesh point in the middle of an existing dead zone

    The point needs a usable connection to the previous point. Placing it where the signal already drops out won't fix that connection.

    Try a spot before the problem room, where the point still has a good connection, or use Ethernet between the points if possible.

  • Assuming powerline is a guaranteed replacement for Ethernet

    Whether powerline works depends on your electrical installation and compatible points. Deco powerline models don't all use the same standard either.

    Check which points work together and test the connection directly from a wall socket, not through an extension lead.

    If the connection over your mains wiring isn't suitable, finding another position or running cables may take extra time.

  • Assuming the stated top Wi-Fi speed guarantees a good picture beyond the kitchen

    A theoretical speed on its own doesn't tell you how well the connection will work where you watch or between the mesh points.

    Focus on the connection where you watch and compare it with the wired test at your router.

Brands to compare

TP-Link

The Deco range includes options for Ethernet backhaul and powerline. Compare the specific set and the number of points you need.

  • TP-Link Netherlands lists gigabit ports and optional Ethernet backhaul for the Deco X50.
  • Powerline on the Deco PX10 depends on compatible points and your electrical installation.

ASUS

The ZenWiFi XD5 is worth considering if you can connect the mesh points using Ethernet.

  • ASUS explains that the XD5 supports Ethernet backhaul when Ethernet connections are available.
  • You need compatible devices to use Wi-Fi 6 features. Some 160MHz capabilities may be limited in certain regions.

NETGEAR

Orbi is a home mesh range. Compare specific sets by their features and the number of points you need.

  • The Dutch Orbi range includes Wi-Fi 7 systems.
  • A stated coverage range doesn't tell you how a particular set will work through your kitchen.

FRITZ!

FRITZ! may be a good fit if you already use compatible equipment from this home networking ecosystem.

  • FRITZ! explains how settings can be shared centrally with connected FRITZ! products.
  • Check the compatibility and features of the specific combination. This doesn't tell you how an individual set will perform in your home.

Mesh Wi-Fi products at Joybuy

This selection includes mesh systems for several rooms, with options for a possible wired, wireless or powerline connection between points. The Dutch Authority for Digital Infrastructure says that radio equipment sold in Europe must meet the applicable requirements and carry the correct CE marking. Check the marking on the device being offered: a retail listing is not an independent conformity test.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

This two-pack may suit a setup with mesh points in different locations. For wired connections, check which ports and cable routes are suitable for your home.

View product at Joybuy
TP-Link Deco PX10 mesh system with Wi-Fi 6, dual-band 2.4 GHz and 5 GHz

TP-Link Deco PX10, dual-band Wi-Fi 6 (2.4 GHz/5 GHz)

The PX10 is an option if you want to connect the mesh points using powerline. How well it works depends on compatible points and your electrical installation.

The product name lists Wi-Fi 6 (802.11ax) and the 2.4 GHz and 5 GHz bands. For powerline, use a wall socket rather than an extension lead.

View product at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

This two-pack is an option if you want to use mesh points in two locations. Check the connection at your chosen spots before relying on the coverage.

The product name lists Wi-Fi 7 (802.11be) and the 2.4 GHz, 5 GHz and 6 GHz bands.

View product at Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A three-pack may suit a setup with several mesh points. Plan where to place them based on the connection between the points and the area where you watch.

The product name lists Wi-Fi 6 (802.11ax) and the 2.4 GHz and 5 GHz bands. TP-Link Netherlands lists gigabit ports and optional Ethernet backhaul for the X50.

View product at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

This three-pack is an option if you want to place several mesh points. Check the connection between the points at the locations you're considering.

The product name lists Wi-Fi 6E (802.11ax) and the 2.4 GHz, 5 GHz and 6 GHz bands.

View product at Joybuy

Frequently asked questions

How can you tell if mesh will help with your documentary?

First, test the connection at your router using an Ethernet cable, then test it near your screen. If the wired connection is already poor, investigate your provider connection first. If the Wi-Fi is weak mainly in the other room, assess the placement of the mesh points and the connection between them. Netflix recommends 15 Mbps or higher for 4K, but that doesn't guarantee that the Wi-Fi connection in your home will work well.

Can you connect the first Deco point wirelessly to your provider router?

No. According to TP-Link, Deco doesn't support repeater mode for this purpose. The main mesh point needs a physical Ethernet connection to the modem, router or internet connection. A subsequent Deco point can connect wirelessly within the Deco network.

Where should you place a mesh point, and what should you check afterwards?

Choose a spot where the connection to both the previous point and your screen is usable. Don't simply put the point in the room where the signal already drops out. After installation, check the connection type in the app and keep the firmware up to date. For powerline, TP-Link recommends using a wall socket rather than an extension lead.

What do your statutory rights and the cooling-off period mean when you buy online?

For online consumer purchases in the Netherlands, there's generally a 14-day cooling-off period from delivery, subject to certain exceptions. This is separate from your statutory rights if a product develops a fault: if it breaks too soon under normal use, contact the retailer. ACM ConsuWijzer explains your statutory rights around faulty goods and the cooling-off period.

Do you need a licence or registration to use Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don't need a licence, notification or registration to use Wi-Fi at home on designated frequencies and within the conditions of use. Radio equipment sold in Europe must meet the applicable requirements and carry the correct CE marking; check this on the device. Being licence-exempt doesn't mean interference can't occur.