Who is this buying guide for?

For watching TV where the Wi-Fi signal is weak

Your internet works by the router, but the connection where you watch TV keeps dropping out. You want to find out whether an extra Wi-Fi node and a different position could help. The Consumers’ Association highlights coverage and ease of use as factors to consider when choosing Wi-Fi extenders and mesh systems.

For households with several devices connected at once

While you’re watching a film, phones, tablets or computers are also in use. You need coverage in the places where those devices are used and want to know which Wi-Fi standards they support. According to the Consumers’ Association, older devices can still connect, but won’t automatically benefit from the improvements offered by Wi-Fi 6.

For viewers with wired connections or an existing router

You want to connect your TV by cable or use a mesh system with your broadband provider’s router. The number of Ethernet ports and how the first mesh node connects are important here. ACM ConsuWijzer explains that consumers are allowed to choose their own router.

What should you look for?

Wireless mesh nodes

Choose this when: the TV and other devices in different rooms have a weak Wi-Fi signal, and there’s no network cable between those rooms.

Trade-off: each additional node still needs to be able to make a good connection to the network, so where you place it in your home matters.

Mesh with Ethernet backhaul

Choose this when: there’s already a network cable between the planned mesh node locations.

Trade-off: check that the system you choose supports Ethernet backhaul and how many ports will be left for your router and TV.

Mesh over powerline

Choose this when: a wireless connection between rooms is difficult and running a network cable isn’t practical.

Trade-off: with devolo Magic 2 WiFi next, the connection between adapters runs over your home’s electrical wiring. The advertised speed doesn’t tell you what speed you’ll get at home.

What to consider What to look for when buying Who should pay particular attention?
Coverage by the TV Check the connection by the TV and router. Then work out where an extra node can still maintain a good connection to the network. If there’s poor coverage where I watch films, I want to know whether a node could help, without overlooking the possibility that the network itself is the problem. Around 40% of consumers say coverage by the TV is their main concern.
Several devices at once Check which devices support Wi-Fi 6 and assess the connection in the places where they’re used. When phones, tablets or computers stay connected while I’m watching TV, I want to know which standards those devices use. Around 30% of consumers prioritise using several devices at once.
Connecting your TV by cable Count the Ethernet ports you’ll need on each node and check whether there’s a cable to the TV and, if needed, between mesh nodes. If my TV or streaming device needs a wired connection, it matters whether there’s a spare port and a suitable route for the cable. Around 20% of consumers say a wired TV connection is their main concern.
Existing router and devices Check how the first node connects to the router and whether the system supports the Wi-Fi standards used by the devices you plan to keep. If you want to keep your broadband provider’s router and older devices, clear connection instructions and compatibility information are useful. Around 10% of consumers prioritise keeping their existing equipment.

Common mistakes when choosing mesh Wi-Fi

  • Assuming the advertised Wi-Fi speed is the speed you’ll get for watching films

    The connection by your TV also depends on your internet connection, where you place the mesh nodes and how they connect to each other. So a high figure on the box doesn’t tell you how fast the connection to your TV will be at home.

    Check the connection by the TV and router. Then compare systems based on the set-up and connections that suit your rooms.

  • Putting an extra node in the spot with the weakest signal

    That node still needs to be able to get a usable connection to the rest of the network.

    Decide in advance where you can put the node. If there’s a network cable between rooms, check whether Ethernet backhaul is a suitable option.

  • Assuming expansion adapters are interchangeable

    According to devolo, the Magic 2 WiFi next can be expanded with adapters from the Magic range, but not with adapters from the dLAN range.

    Check the product family before choosing an extra adapter.

Brands to compare

TP-Link

The Deco X50 is available with one, two or three nodes. This range could be worth considering if Ethernet ports or a wired connection between nodes are important to you.

  • According to TP-Link, the Deco X50 has three gigabit ports and supports Ethernet backhaul.
  • The manufacturer’s coverage figure for a three-pack isn’t a measurement taken in your home, so check which pack size you need too.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option for households that want to keep using older Wi-Fi devices and may have Ethernet between nodes.

  • ASUS lists backward compatibility and support for Ethernet backhaul for the XD5.
  • Older devices won’t automatically get the improvements offered by Wi-Fi 6. ASUS also says that 160 MHz isn’t available in every region.

FRITZ!

The Mesh Set 1700 is also available as a two-piece set. According to FRITZ!, it’s designed to connect to an existing router or fibre-optic modem via LAN.

  • According to FRITZ!, your existing router doesn’t have to be a FRITZ!Box.
  • The Consumers’ Association notes that Wi-Fi 7 doesn’t automatically offer the average user more benefits than Wi-Fi 6. Check the specific model and its CE marking.

devolo

Magic 2 WiFi next combines mesh Wi-Fi with a connection over your home’s electrical wiring. It’s an alternative if there’s no network cable between rooms.

  • According to devolo, the Wi-Fi adapter has two gigabit LAN ports and can be expanded with adapters from the Magic range.
  • According to devolo, adapters from the dLAN range aren’t supported. The advertised transfer speed doesn’t measure the performance you’ll get at home.

Mesh Wi-Fi at Joybuy

These product picks focus on mesh Wi-Fi for several rooms, multiple connected devices and connections to an existing router or TV. Before buying, check that the specific model carries the required CE marking. The Digital Infrastructure Inspectorate states that radio equipment sold on the Dutch market must meet the relevant European requirements.

TP-Link Deco X50 three-pack mesh Wi-Fi system

TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

This three-node system could suit a home with several areas that need Wi-Fi, particularly if you’re considering Ethernet backhaul.

The product name specifies dual-band Wi-Fi on 2.4 GHz and 5 GHz. According to TP-Link, each unit has three gigabit ports and the X50 supports optional Ethernet backhaul.

Joybuy
Huawei eKit OptiX FG736 BE3600 Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 Dual-Band Wi-Fi 7 Mesh Router

This could be a good fit if you want to build a mesh network with several units. Check that your existing devices and router are suitable for the set-up.

The product name specifies dual-band Wi-Fi 7. According to the product description, several units can work together as a single mesh network with one network name.

Joybuy
TP-Link Deco XE75 Pro three-pack tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

This three-unit system could suit a household with several areas needing Wi-Fi and devices that support Wi-Fi 6E.

The product name specifies tri-band Wi-Fi on 2.4 GHz, 5 GHz and 6 GHz. The product description lists three Ethernet ports per unit; the stated port speeds vary, so check the specifications for the model you’re buying.

Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E mesh system

TP-Link Deco XE75 Tri-band Mesh Wi-Fi 6E

The product description lists three mesh units, which could suit a home where Wi-Fi is needed in several areas.

It specifies tri-band Wi-Fi on 2.4 GHz, 5 GHz and 6 GHz, support for several Wi-Fi generations and three Ethernet ports per unit. Check which ports and connections your set-up requires.

Joybuy
TP-Link Deco X50-PoE three-pack dual-band Wi-Fi 6

TP-Link Deco X50-PoE (3-Pack) Dual-Band Wi-Fi 6

This three-unit system could work for you if you want to connect the mesh nodes via Ethernet and use PoE in your set-up.

The product name specifies dual-band Wi-Fi on 2.4 GHz and 5 GHz. The product description lists PoE support and two Ethernet ports per unit.

Joybuy

Frequently asked questions

Should you buy mesh Wi-Fi straight away if a film keeps buffering?

No. First, check the connection by your TV and compare it with the connection by your router. Netflix recommends a stable connection of at least 15 Mbps for 4K streaming on its own service; that doesn’t guarantee a mesh system will stop buffering.

Can you keep using older phones and tablets with Wi-Fi 6 mesh?

Yes, if the system you choose supports the Wi-Fi standard used by the device. ASUS lists backward compatibility for the ZenWiFi XD5; according to the Consumers’ Association, older devices won’t automatically get the specific improvements offered by Wi-Fi 6.

How do you connect mesh if you’re keeping your broadband provider’s router?

Follow the instructions for the specific system and connect the first node as directed. FRITZ! describes connecting the Mesh Set 1700 to an existing router via LAN; this doesn’t mean every mesh system connects in the same way.

What are your rights on returns and guarantees when buying online in the Netherlands?

According to ACM ConsuWijzer, for a standard online purchase you’ll generally have a statutory 14-day cooling-off period after delivery, with some exceptions. You’re also entitled to a statutory guarantee if a product doesn’t perform as you could reasonably expect under normal use; this isn’t automatically limited to the manufacturer’s guarantee.

What should you look for when buying Wi-Fi equipment for the Dutch market?

Check the CE marking on the specific model. The Digital Infrastructure Inspectorate states that radio equipment sold on the Dutch market must meet the relevant European requirements and carry the required CE marking.