Who is this choice relevant to?

Working from home across two floors

You work downstairs and use a desk upstairs, perhaps for video calls. You want a reliable connection in both places.

Using a wired desk setup

You want to connect a computer or another device upstairs using Ethernet. That means both the available ports and the connection between the mesh nodes matter.

Living in a home without a cable between floors

You’ll need a wireless connection between the mesh nodes. Where you can place them and the signal between them are then important considerations.

What should you look for when buying?

First, work out whether there’s a suitable cable between the floors. Then choose based on the connections you need at your desk, your existing router and any ongoing running costs.

What to consider What to look for Who should pay particular attention?
Connection between floors Check where the nodes can be placed and test the connection at your desk, not just next to the router. With a wireless connection, distance or a floor can affect the link between nodes. If I work downstairs and need a reliable connection upstairs, I want to know whether both areas will be covered. Around 40% of consumers in this situation prioritise coverage and stability above all else.
Ethernet at your desk For each node, count how many ports will be left once the router and any Ethernet backhaul have been connected. If I want to connect my computer or docking station upstairs using a cable, I need ports available both for my desk and for the connection between nodes. Around 30% of consumers put their Ethernet needs first.
Existing router Check which operating mode will work with your router and which network features will remain available in that mode. If I want to keep my current router, I want to know in advance which features the mesh system will take over and which I’ll still manage. Around 20% of consumers give compatibility with their existing router top priority.
Running costs and maintenance Compare the power consumption of the whole setup, any subscriptions, and the update and warranty terms for the exact model. If I want to use the system long term, ongoing costs and maintenance matter as well as the purchase price. Around 10% of consumers put running costs first.

Common buying mistakes

  • Assuming advertised speed or coverage guarantees a good signal upstairs

    Manufacturer specifications don’t tell you how much signal will reach a desk on the other side of a floor.

    Consider where you can place the mesh nodes and test the connection where you work. Treat coverage claims as specifications, not as a measurement in your home.

  • Counting an Ethernet port twice

    A port may already be needed to connect to the router or another mesh node, so it won’t also be available for desk equipment.

    Before buying, map out which cables will connect to each node and how many ports will be left afterwards.

    If your setup doesn’t have enough ports, you may need an extra switch or different cabling.

  • Confusing access point mode with router mode

    With Deco, some network features aren’t available in the Deco app when the system is in access point mode.

    Before choosing an operating mode, check which router will handle the network features you want.

  • Looking only at the purchase price

    Power consumption and paid-for extra features can add to the cost, especially if your mesh nodes are switched on all the time.

    Compare the features available without a subscription and the power consumption of the whole setup.

    Subscriptions and power consumption can add ongoing costs, depending on the system and how you use it.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh option that supports wireless and wired connections between nodes. The X50-PoE is a different model, so don’t treat it as the same product.

  • TP-Link lists three gigabit ports per Deco X50 node and optional Ethernet backhaul.
  • In a 2024 test setup, wirelessly connected Deco X50 satellites performed less well than the main unit. That result applies to that particular test setup, not every home.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system worth considering if Ethernet backhaul or the choice between one network name and separate band names matters to you.

  • ASUS describes Ethernet backhaul for the XD5 when Ethernet connections are available.
  • Advertised top wireless speeds and coverage areas are manufacturer specifications, not measurements from a two-storey home.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Set 1600 can be connected behind an existing router or fibre modem. The FRITZ!Repeater 3000 AX is a separate option for extending a compatible home network.

  • FRITZ! lists automatic updates, one gigabit LAN port per repeater and a five-year manufacturer’s warranty for the Set 1600.
  • If you have a wired desk setup, check whether a port will still be free after connecting everything. The warranty mentioned applies to this set and doesn’t automatically cover other FRITZ! products.

NETGEAR

The Orbi RBK763S is a Wi-Fi 6 set with a router and two satellites. It’s worth considering if you want a dedicated wireless connection between the router and satellites.

  • NETGEAR lists a dedicated router-to-satellite connection and seven gigabit ports in total for the RBK763S.
  • These specifications don’t prove that the connection will perform better through a particular floor. One year of Armor is included with the set mentioned; check the terms after that.

Mesh products at Joybuy

This selection includes mesh products for connecting different areas of your home, including a workspace downstairs and a desk upstairs. Check that the connections and connection route for each model suit your setup.

TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 (3-pack)

A three-piece mesh system for connecting several areas of your home to one network.

Wi-Fi 5; two Ethernet ports per device. The stated maximum Ethernet data rate is 100 Mbit/s, which is worth bearing in mind if you need a faster wired connection upstairs.

View at Joybuy
TP-Link Deco M4 mesh system, 3-pack

TP-Link Deco M4 (3-pack)

A three-piece mesh system for connecting different areas of your home to one wireless network.

Wi-Fi 5; two Ethernet ports per device. According to the product description, setup is managed through the Deco app.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A three-piece mesh system to consider if you want to connect the nodes between floors using cables.

Wi-Fi 6; optional Ethernet backhaul and three gigabit ports per node.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band mesh router

Huawei eKit OptiX FG736 BE3600

A mesh router to consider if you want a network that can grow as you add extra units.

Dual-band Wi-Fi 7; according to the product description, several units can work together in one mesh network with a single network name.

View at Joybuy
Linksys Velop Pro 7 mesh system with two nodes

Linksys Velop Pro 7 (2 nodes)

A two-node mesh system to consider for coverage across several areas of your home.

Tri-band Wi-Fi 7; the product description says you can expand the system with extra nodes or compatible Linksys mesh devices.

View at Joybuy

Frequently asked questions

Do I need a network cable between downstairs and upstairs?

No, some mesh systems can connect the nodes wirelessly. According to their manufacturers, the TP-Link Deco X50 and ASUS ZenWiFi XD5 also support Ethernet backhaul. Check the available ports and test the connection at your desk.

Where should I place the mesh nodes if the connection upstairs keeps dropping?

Start by checking the router’s location and test the connection in both work areas. A wirelessly connected node still needs to reach the other node, so don’t place it only where the signal has already dropped out.

Can I keep using my existing router?

That depends on the system and the operating mode you choose. TP-Link describes an access point mode for Deco behind a main router, but some advanced features aren’t available in the Deco app in this mode. FRITZ! says that the Mesh Set 1600 can be connected behind an existing router.

What ongoing costs and terms should I check?

Check whether the features you want require a subscription, how much energy the whole setup uses, and which update and warranty terms apply to the exact model. FRITZ! lists a five-year manufacturer’s warranty for the Mesh Set 1600; this period doesn’t automatically apply to other models.

Do I need a permit for home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, licence-exempt use of frequencies, including Wi-Fi, doesn’t require notification or registration. Also check that the specific device being offered carries the required CE marking; the model name alone doesn’t prove this.