Workshop participant who can’t afford dropouts
You’re taking part in a live workshop and want to find out whether interruptions are happening at your internet connection or between the router, access point and basement.
First, check that the connection works properly by the modem and whether the problem is mainly in the basement. If there’s a suitable network cable running to the basement, a wired access point or a mesh system with Ethernet backhaul could be a good fit. Without a cable, wireless mesh is mainly an option if the intermediate node itself still has a good connection. Check the ports and how it connects to your existing router, too – not just the advertised speed.
You’re taking part in a live workshop and want to find out whether interruptions are happening at your internet connection or between the router, access point and basement.
Wi-Fi works elsewhere in the house, but the signal doesn’t reach the basement well. Your choice will mainly depend on whether there’s a suitable spot for a wireless intermediate node or whether you can run a cable.
You want to improve the connection to the basement without automatically replacing your modem or router. So check the connection, operating mode and total cost.
When: if a working network cable can connect the router to an access point in or near the basement.
Trade-off: the nodes don’t use Wi-Fi bandwidth to connect to each other, but running a cable may take work or require additional materials.
When: if cabling isn’t possible and there’s a spot outside the basement where the connection to the router is still strong.
Trade-off: you’ll need to test the connection through floors and other obstacles at the chosen location.
When: if only one fixed workshop computer needs a connection and a network cable reaches the basement.
Trade-off: a direct cable doesn’t add Wi-Fi for other basement devices. An access point does, but it needs to be positioned and configured.
| What to consider | What should you check? | Who is this most important for? |
|---|---|---|
| Keeping the connection stable during the workshop | Test the connection by the modem and in the basement. Check that the system you choose supports Ethernet backhaul, then test a video call at your workstation. | If I’m taking a live class, I want to know whether the dropouts are coming from my internet connection or the link to the basement. Around 36% of consumers prioritise a stable connection during a workshop. |
| Coverage through the basement floor | Check where you can place the nodes and test whether the intermediate node still has a good connection to the router. | When Wi-Fi works upstairs but doesn’t reach my basement room well, I’m looking for a suitable spot for an intermediate node. Around 29% of consumers say basement coverage is their top priority. |
| Connecting to your router and computer | Check the supported setup, the number of ports and whether you’re buying or renting a device from your provider. | I want to keep using my existing router and workshop computer, and I want to know in advance which connection will work for them. Around 21% of consumers prioritise compatibility with their existing equipment. |
| Total cost of the setup | Compare buying with any rental costs, and work out whether you’ll need a cable, an extra node or a switch. | If I only want to improve the basement workstation, I don’t want to pay for nodes that won’t solve a specific coverage problem. Around 14% of consumers are mainly looking for the cheapest suitable setup. |
A wireless mesh node also needs a connection to the rest of the network. If you put it somewhere without a usable connection, it won’t automatically fix the weak signal to that spot.
Test an intermediate location first, and look into Ethernet backhaul if the connection struggles to get through the floor.
If the chosen spot doesn’t work, you may still need a cable or a different placement.
Specifications can’t account for the floors, obstacles and conditions in your home. A Wi-Fi label doesn’t prove that you’ll get a good connection at your workshop.
Check the connection at your workstation and between the nodes. Don’t give a Wi-Fi 7 label more weight than a working backhaul.
KPN states that rented SuperWifi nodes only work with KPN Internet.
Check whether you’re buying or renting the nodes, and which terms apply to your setup.
If you switch provider, you may need a different solution.
A set with two nodes and one with three won’t give you the same setup. The number of nodes you need for a single basement room depends on your home and where you place them.
Check the full model name, set size and ports on the version being offered.
You may need to buy an additional node if one is missing.
The Deco X50 range includes mesh Wi-Fi 6 units, each with three gigabit ports and an Ethernet backhaul option.
The FRITZ!Mesh Set 1700 contains three FRITZ!Repeaters 1700. A repeater can also connect via LAN.
The ZenWiFi BD4 range offers dual-band Wi-Fi 7, with two 2.5-gigabit ports per unit and a wired backhaul option.
SuperWifi is a provider option for extending your existing KPN network. KPN offers the option to buy or rent.
Nest Wifi Pro is a mesh option for which Google describes Ethernet backhaul between compatible units.
These mesh sets with multiple nodes are designed for setups where you want to build the connection to the basement via an intermediate node. Check that this node still has a good connection to the router where you plan to place it.
Image unavailable
This two-unit mesh set may suit a setup with an intermediate node. Check the connection where you plan to place it.
TP-Link’s product information lists tri-band Wi-Fi 7 and support for wired and wireless backhaul. Each unit is listed with 10, 2.5 and 1 Gbps WAN/LAN ports.
Image unavailable
With three units, you can consider several possible locations. Test whether the connection between the nodes and the router is usable in the places you have in mind.
TP-Link’s product information lists dual-band Wi-Fi 5 and two Ethernet ports per unit, with a maximum port speed of 100 Mbps. Bear this limit in mind if you want to connect devices by cable.
Image unavailable
This three-unit set gives you several possible locations to choose from. First, work out where an intermediate node can still get a good connection to the router.
TP-Link’s product information lists dual-band Wi-Fi 6 and three gigabit Ethernet ports per unit.
Image unavailable
This two-unit set may suit a mesh setup with an intermediate node. Check which installation method works for your home.
TP-Link’s product information lists Wi-Fi 6, PoE support and two Ethernet ports per unit.
Image unavailable
With three units, you can consider different locations for an intermediate node. Test how well the nodes connect to each other in those spots at home.
TP-Link’s product information lists tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz.
Not necessarily. First, compare the connection by the modem with the one at your workshop. An extra access point won’t change the internet connection itself. If there’s a problem with that connection, contact your provider.
Start somewhere the node can still receive the existing Wi-Fi signal well, rather than automatically putting it at the farthest point in the basement. Reduce the number of obstacles between the nodes and check the connection where you intend to place it.
It depends on the workshop service, the resolution and how you’re taking part. For a 720p group call in the app scenario described, Zoom Technical Library gives peak usage figures of 2.6 Mbps upload and 1.8 Mbps download. This is an example, not a requirement for every service. Test the call at the place where you’ll be taking part in the workshop, too.
Keep your router and access points up to date, and secure your wireless network. After installation, check that the nodes are still connected to each other as intended.
No. According to the Dutch government, there’s no fixed statutory warranty period in the Netherlands; a manufacturer’s warranty is an additional benefit. If a product is faulty, contact the seller.