Who is this for?

Families with weak Wi-Fi in the basement

You want to watch family videos downstairs and need to work out whether an additional point can get a usable connection there. The Consumers’ Association (Consumentenbond) recommends considering where you place Wi-Fi points and any obstacles between them.

Families with a local video library

You store videos on a device at home and want the player in the basement to find the files on your network. With a local media server, the server and player need to be able to communicate over the network.

Families who can’t run a cable

You want to keep your existing router and find a suitable spot for wireless mesh points, without assuming that a point will work well just anywhere in the basement.

What should you look for?

Start by checking the connection between rooms and whether your video files are accessible. Then decide whether to use a cable, wireless mesh or an adjustment to your existing network.

Adjust your existing network

When: if changing the placement gives you a usable connection in the basement, or one well-positioned Wi-Fi point is enough.

Bear in mind: changing the placement could mean you don’t need an extra set, but it won’t necessarily solve a signal that struggles to get through the floor.

Wired mesh point

When: if you have, or can run, an Ethernet cable to the basement and want to use wireless devices there too.

Bear in mind: the cable route and the ports needed for backhaul and playback equipment will help determine your setup.

Wireless mesh only

When: if you can’t run cables and there’s an intermediate spot where the mesh points can connect reliably.

Bear in mind: obstacles and positioning affect the connection. Adding a point in a basement where reception is already weak doesn’t guarantee smooth video playback.

Concern What to look for when buying Who is this important for?
Usable connection in the basement Check where the points can go and whether they can connect to each other. The Consumers’ Association recommends keeping obstacles between wireless points to a minimum. If I want to watch videos downstairs, I need a usable connection there too; around 36% of consumers make basement coverage their top buying priority.
Access to local videos Work out where the files are stored, how you’ll play them and whether the server and player can communicate through the network settings. Synology describes DLNA streaming to compatible devices on the same network. I want my player in the basement to find videos on a home server; around 29% of consumers prioritise access to local videos.
Installation without running a new cable Check the installation instructions and the router or access point mode of the system you choose. TP-Link describes Ethernet backhaul as a wired connection between Deco units. If I can’t run a cable to the basement, I want to know where wireless points can still connect reliably; around 21% of consumers prioritise installation without a new cable.
Cost and management Check how many points your setup needs and what update and security settings are available. The Consumers’ Association takes energy use into account because routers and Wi-Fi extenders are generally left on continuously. I want to limit the number of devices and the ongoing maintenance; around 14% of consumers name cost and management as their top buying priority.

Common mistakes

  • Focusing only on the advertised coverage area

    The stated coverage area doesn’t tell you whether the points will connect to each other in your home. Obstacles and positioning also play a part.

    Check the connection where you plan to watch and decide where the points can go. The Consumers’ Association recommends taking obstacles between wireless points into account.

    Depending on your setup, you may need a suitable switch or a different point.

  • Assuming a Deco E4 is the same as a Deco X50

    The Deco E4 and Deco X50 have different port specifications. The E4 listing specifies ports of up to 100 Mbps; TP-Link specifies gigabit ports for the X50. These details apply to the models listed and aren’t interchangeable.

    Check the full model name and the port specifications on the pack you’re considering.

Brands to consider

TP-Link

Deco mesh systems include wireless connections and, where cabling is available, Ethernet backhaul.

  • TP-Link provides documentation on wired connections and setup modes. According to TP-Link, the Deco X50 has three gigabit ports per unit.
  • The stated Wi-Fi speed and coverage aren’t a measure of the connection in your basement. Check the exact Deco model and the ports you’ll need.

FRITZ!

The FRITZ!Mesh Set 1700 is worth looking into if you want to use a mesh system with an existing router.

  • FRITZ! describes how to use the set with a FRITZ!Box or another router.
  • Check how many points and free connections are included in the pack you choose. Router compatibility doesn’t guarantee wireless coverage in the basement.

ASUS

The ZenWiFi BD4 could be relevant if Wi-Fi 7 and multiple 2.5-gigabit ports suit your setup.

  • ASUS specifies dual-band Wi-Fi 7 and two 2.5-gigabit ports per unit.
  • Those ports are only useful for equipment and connections that support them. Wi-Fi 7 alone doesn’t prove you’ll get coverage in the basement.

KPN

SuperWifi 2 is worth considering as part of an existing KPN network setup.

  • KPN describes SuperWifi points as available to buy or rent.
  • Check which modem you use and what terms apply. KPN says SuperWifi 1 doesn’t work with the KPN Box 14; this doesn’t automatically tell you anything about other models.

NETGEAR

The Orbi 770 series is a tri-band mesh option to compare if multiple points and connections matter to you.

  • NETGEAR specifies tri-band, enhanced backhaul and 2.5-gigabit connections for this series.
  • These are manufacturer specifications and claims, not independent measurements in your basement. First decide whether you need these features for your setup.

Mesh products on Joybuy

This selection includes mesh kits and mesh routers for extending your home Wi-Fi. Check the number of units, connections and whether the features listed suit your cable route and existing network for each model.

TP-Link Deco E4 (3-pack) dual-band mesh kit with Wi-Fi 5

TP-Link Deco E4 (3-pack), Wi-Fi 5

A set of three mesh units to consider if you need multiple points; placement will also affect the connection to the basement.

Dual-band: 2.4 and 5 GHz. Two Ethernet ports per unit, with a maximum speed of 100 Mbps.

Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), Wi-Fi 6

This three-unit mesh kit is worth considering if you want a wired connection between points and can run a cable to the basement.

Dual-band: 2.4 and 5 GHz. The product description specifies optional Ethernet backhaul and three gigabit ports per unit.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600, Wi-Fi 7

A mesh router to consider if you’re putting together a mesh setup; check which units and connections your planned setup requires.

Dual-band Wi-Fi 7. The product description says that multiple units can work together in a mesh network.

Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000, Wi-Fi 6

This mesh router is one option to compare with the other mesh products; check which points and connections you’ll need for your basement setup.

Dual-band Wi-Fi 6.

Joybuy
TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6 mesh kit

TP-Link Deco X50-PoE (2-pack), Wi-Fi 6

A set of two mesh units to consider if two points suit your setup; check in advance that PoE is compatible with your available equipment.

Dual-band Wi-Fi 6. The product description specifies PoE support and two Ethernet ports per unit.

Joybuy

Frequently asked questions

Will an extra mesh point in the basement always help?

No, not always. With wireless mesh, the new point also needs to be able to get a usable connection to the other points. Try a suitable intermediate spot; if you can run a cable, consider a point with Ethernet backhaul.

Why can’t my television find the family videos on my NAS?

Check whether your television or media player is compatible with the playback method and can access the server over the network. With Synology Media Server via DLNA, compatible devices need access on the same network; a guest network can affect that access.

What should I check after installation?

Check the placement and make sure that a system with Ethernet backhaul is actually using the wired connection. Update your router and other Wi-Fi devices, and use a strong Wi-Fi password.

What are my rights if a mesh system I’ve bought online isn’t suitable?

For eligible distance purchases, you’ll often have a 14-day cooling-off period, according to the Dutch Government. You’re also entitled to a product that works as it should; if there’s a problem, the seller must provide a solution. The cooling-off period and your legal guarantee are separate rights.

Do I need a permit or registration to use Wi-Fi at home in the Netherlands?

You don’t need a permit to use Wi-Fi at home if you use the designated frequencies and comply with the conditions of use. The Dutch Authority for Digital Infrastructure says that no notification or registration is needed for permit-free frequency use; this doesn’t apply outside the relevant conditions.