Who is this advice for?

Video caller with weak basement Wi-Fi

Does your call keep dropping out downstairs, even though the connection seems better elsewhere in the house? First, assess the Wi-Fi at your workstation and consider where to place the nodes. Consumentenbond and the Dutch Authority for Digital Infrastructure offer practical advice on Wi-Fi and node placement.

Home worker who can run a cable

If you can use or install an Ethernet cable to the basement, you can connect your mesh nodes with it rather than relying on Wi-Fi passing through the floor. Consumentenbond, TP-Link and ASUS highlight placement and wired connections as important considerations.

Buyer with an existing router from their internet provider

Want to extend your coverage in the basement without overlooking your existing connections or network configuration? Check the system’s operating mode and ports. Consumentenbond and FRITZ! cover how to connect to an existing network.

What should you look for when choosing?

Mesh with Ethernet backhaul

Suitable when: you can run a cable between floors and the wireless connection through the floor is unreliable.

Trade-off: you’re less reliant on a wireless connection between the nodes, but you’ll need a cable route and an available port.

Fully wireless mesh

Suitable when: you can’t run cables and can find a midway spot where the node still gets a good signal from the main network.

Trade-off: you have more flexibility when placing the nodes, but a weak connection between them remains a weak link.

Connect your laptop directly by cable

Suitable when: you take calls from one fixed location and can connect your laptop via Ethernet.

Trade-off: your laptop no longer relies on Wi-Fi, but this won’t automatically improve Wi-Fi coverage for other devices in the basement.

First, check the connection where you take calls and the route between the mesh nodes. Then choose based on the number of nodes, ports and router mode.

What to consider What to look for when buying Who is this important for?
Signal at your workstation Test the connection at potential node locations and check your upload connection too. If my call keeps dropping out downstairs, I want to know whether the node gets a good signal there and whether my upload connection is fast enough. Around 36% of consumers say signal at their meeting location is their top priority.
Cabling between floors Check for Ethernet backhaul, the ports available on each node and whether you can run a cable to the basement. If I can run an Ethernet cable downstairs, I want to know which system can connect the nodes with it and which ports will be left free. Around 29% of consumers put cabling at the top of their list.
Compatibility with your network Check the supported operating mode, how it connects to your current router and the connections available on your laptop. If I want to keep using my current router and devices, the system needs to work with my network. Around 21% of consumers focus mainly on compatibility.
Total cost and maintenance Compare the number of nodes included, any paid features, and information about updates and the warranty. If I have one fixed meeting location, I don’t want to choose nodes or features that my setup doesn’t need. Around 14% of consumers prioritise total cost and maintenance.

A higher advertised speed or a newer Wi-Fi standard doesn’t in itself prove that you’ll get a better connection in your basement. Building materials and node placement also make a difference.

Common pitfalls

  • Placing an extra node where the signal is already poor

    The node needs to connect to the rest of the network itself. A basement location with poor reception won’t automatically fix a weak connection.

    Try a midway location first, or check whether Ethernet backhaul is possible.

  • Assuming the advertised maximum speed guarantees coverage in your basement

    Actual throughput and coverage depend on factors including building materials, obstacles and connected devices. TP-Link also makes this limitation clear in the Deco X50 user guide.

    Check the connection where you take calls and the route between nodes before choosing based on speed claims.

  • Assuming a different pack size or model variant is the same product

    The number of nodes, connections and installation process can vary between versions. The model name alone may not be enough to compare two packs.

    Check the full model number, the number of nodes included and the ports on each node.

Brands to compare

TP-Link

The Deco X50 range may be worth considering if you’re comparing an expandable Wi-Fi 6 system with optional Ethernet backhaul. TP-Link lists three gigabit ports on each X50 node.

  • The manufacturer describes both wireless and optional wired connections between Deco units.
  • Check the pack size and full model number: the X50 and X50-PoE are different products. Coverage also depends on the building materials.

FRITZ!

The FRITZ!Mesh Set 1700 is worth comparing if you want to use the system with an existing router or FRITZ!Box.

  • FRITZ! says the set can be used with an existing router; the Repeater 1700 has a LAN port.
  • Check how to connect the nodes in your basement setup and how many connections you need. The Wi-Fi standard alone doesn’t guarantee coverage through the floor.

ASUS

The ZenWiFi BD4 is worth comparing if access point mode, wired backhaul and the available ports matter to you.

  • ASUS lists access point mode, wired backhaul options and two 2.5-gigabit ports on each node.
  • Check the exact pack variant and which connections will remain free after installation. A higher port speed or Wi-Fi 7 label doesn’t prove that your video calls will work better in the basement.

NETGEAR

Orbi is worth comparing if you want to look at the connection between the router and satellites in a supported system.

  • NETGEAR describes Ethernet backhaul for supported Orbi systems.
  • Not all Orbi variants have the same ports or features. Check the exact model and placement.

Joybuy products

These mesh Wi-Fi options are worth comparing for a basement workstation. For each system, check the backhaul, number of nodes and connections to make sure they suit your setup.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68, 2-pack

An option to consider if you’re looking at using two mesh nodes with a wired connection between them.

The product description lists tri-band Wi-Fi and wired and wireless backhaul.

View at Joybuy
ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

A two-node system to compare if you’re looking for a mesh setup for your basement workstation.

The product name lists tri-band and Wi-Fi 7; the product details specify two mesh nodes.

View at Joybuy
TP-Link AX1800 mesh Wi-Fi 6 system, 2-pack

TP-Link AX1800 mesh Wi-Fi 6 system, 2-pack

An option to compare if you’re looking for two nodes and want to use a wired connection between them.

The product description lists Wi-Fi 6 and Ethernet backhaul.

View at Joybuy
TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

This three-node system is worth comparing if you want to place nodes in several areas of your home.

The product details list two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

An option to compare if you’re looking for three mesh nodes and the option of Ethernet backhaul.

The product description lists optional Ethernet backhaul and three gigabit ports per node.

View at Joybuy

Frequently asked questions

Will an extra mesh node help if my internet connection is too slow for video calls?

Not necessarily. Test the connection and upload and download speeds at your workstation. If your internet connection is also too slow elsewhere, speak to your provider first. Microsoft Support notes that both people on a call need sufficient bandwidth.

Does a wireless mesh node need to be in the middle of the basement?

No, not necessarily. If there’s no cable, the node needs to maintain a good connection to the rest of the network. Try a spot with a stronger signal, then test the connection where you take calls. Ethernet backhaul lets you avoid relying on a wireless connection between the nodes.

Can I keep using my current router?

That depends on the mesh system’s operating mode and how it connects to your network. Check the instructions for the specific model: TP-Link lists access point mode for the Deco X50, ASUS for the ZenWiFi BD4, and FRITZ! explains how to use the Mesh Set 1700 with an existing router.

Does a two-year manufacturer’s warranty in the Netherlands always mean you’re covered for the full warranty period?

No. According to ACM ConsuWijzer, your statutory rights apply alongside any manufacturer’s or seller’s warranty. The seller must repair or replace a product free of charge if it develops a fault too soon under normal use; there is no single fixed statutory warranty period for every product.

Do I need a licence to use Wi-Fi at home in the Netherlands, and what should I look for on the equipment?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for home Wi-Fi as long as you use the designated frequencies and follow the conditions of use. Radio equipment placed on the EU market must meet conformity requirements; manufacturers apply the mandatory CE marking when their products comply. Check the marking on the specific device.