If you can run an Ethernet cable to the basement, start by looking at mesh systems with Ethernet backhaul. This uses a cable to connect the mesh units, rather than sending the signal wirelessly through the floor. If you can’t run a cable, test the wireless connection where you plan to put the unit. Powerline may be an alternative if your home’s electrical wiring is suitable. Mesh Wi-Fi doesn’t control who can access your project files, so set folder permissions separately.
Who is this buying guide for?
Basement user working with large files
You work in the basement and want to share project files with computers or storage elsewhere in your home. First, see whether you can run an Ethernet cable to a mesh unit. Tweakers and TP-Link Netherlands describe Ethernet backhaul as a wired connection between mesh units.
File sharer without a cable route
You can’t run an Ethernet cable. Test the wireless connection where you plan to put the unit, or look into a powerline setup that’s suitable for your home’s electrical wiring.
Shared-folder administrator
You want the right people to be able to open your project files. Microsoft Support explains that network sharing and file access need to be set up separately.
What should you look for when buying?
Ethernet backhaul
Choose this option: if you can run an Ethernet cable between the main unit and the basement unit. Tweakers and TP-Link Netherlands describe the cable as the connection between mesh units.
Bear in mind: running a cable may take some work. Check that the exact system supports Ethernet backhaul and that its connection options suit your setup.
Fully wireless mesh
Choose this option: if you can’t run a cable and the mesh unit has a usable connection to the main unit in its final position.
Bear in mind: distance and the floor can weaken the connection between units. An extra mesh unit doesn’t guarantee good coverage in the basement.
Powerline backhaul
Choose this option: if running a cable isn’t practical and testing the sockets near both mesh units gives you a usable connection.
Bear in mind: performance depends on your home’s electrical wiring and whether the units you choose are compatible.
| What to consider |
What should you check? |
Who should pay particular attention? |
| Connection to the basement |
Check whether you can run a cable and use Ethernet backhaul. If not, test the connection between the mesh units where you plan to put them. |
If the floor could weaken the connection between levels, first find out how the basement unit will connect to the main unit. Around 42% of consumers prioritise the basement connection. |
| File transfers |
Compare performance via a wireless satellite and check whether you can connect computers or storage devices by cable. |
Transferring project files through the basement unit matters more to you than a high advertised Wi-Fi speed alone. Around 25% of consumers give file transfers top priority. |
| File access |
Check whether devices can access the local network, and set folder permissions for the people who need them. |
If several people use project folders, you’ll want to decide who can open the files. Around 17% of consumers prioritise access management. |
| Installation and costs |
Compare the number of mesh units, cabling or powerline equipment required, available ports and any paid features on the exact model. |
If you want to keep installation and extra costs manageable, find out in advance which setup and features you need. Around 16% of consumers give installation and costs top priority. |
What to watch out for
-
Comparing advertised top speeds alone
A high wireless speed doesn’t necessarily tell you how quickly files will transfer through a wireless satellite. In an independent test of the Deco X50, client performance via wireless satellites lagged behind. This finding applies to the model tested.
Where possible, compare measurements taken via satellites and test the connection in its final position.
-
Placing a unit in the basement without checking the connection
The floor can weaken the connection between the mesh unit and the main unit. An extra unit therefore won’t automatically give you a usable boost in speed.
First, see whether Ethernet backhaul is possible. If you choose a wireless connection, check it at the planned location.
-
Assuming all powerline mesh units work together
According to TP-Link, the Deco PX50 doesn’t provide powerline backhaul with the Deco PX10, P7 or P9. Your home’s electrical wiring also plays a part.
Check the exact models and test the connection using the sockets you plan to use before choosing a setup.
-
Confusing mesh Wi-Fi with file management
A network connection doesn’t determine who can open a project folder.
Set folder permissions separately and grant access to the people who need it.
Brands worth considering
TP-Link
The Deco range includes Ethernet backhaul options, the XE75 Pro as a 6GHz option and the PX50 with G.hn powerline.
- TP-Link describes Ethernet backhaul for Deco units. The PX50 is a specific example of a mesh system with G.hn powerline.
- According to TP-Link, the PX50 doesn’t provide powerline backhaul with the Deco PX10, P7 or P9. An independent test found that client performance via wireless satellites lagged behind on the X50 model tested, and that some advanced features require a subscription.
ASUS
The ZenWiFi XD5 is a Wi-Fi 6 mesh system worth considering if you can use Ethernet backhaul.
- ASUS says the XD5 supports Ethernet backhaul when Ethernet ports are available.
- The manufacturer notes that some Wi-Fi 6 benefits require compatible devices. This isn’t a measure of performance in a basement.
FRITZ!
The Mesh Set 4200 is a Wi-Fi 6 option to consider if support and connecting to your existing network are important.
- FRITZ! lists a gigabit LAN port on each repeater in the two-piece set, along with updates and a five-year manufacturer’s warranty.
- This manufacturer information doesn’t show how the system will perform in a particular basement. Check how many units and connections your setup requires.
Joybuy product picks
These Joybuy product picks are mesh systems with multiple units. Check which connection options are available between the units and whether the ports suit your computers or storage devices.
No image available
TP-Link Deco X50 (3-pack)
An option to consider if you want to use Ethernet backhaul between Deco units.
Wi-Fi 6; three gigabit ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack)
A mesh system with multiple units and Ethernet ports on each, to consider for your basement setup.
Tri-band Wi-Fi 6E; three Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 (3-pack)
A three-unit system to consider if you need multiple network points.
Tri-band Wi-Fi 6E mesh; three gigabit ports per unit.
View at Joybuy
No image available
TP-Link Deco X50 (2-pack)
An option to consider if you want a two-unit mesh system with Ethernet backhaul.
Wi-Fi 6; three gigabit ports per unit.
View at Joybuy
No image available
TP-Link Deco E4 (3-pack)
A three-unit system to consider if you need multiple network points.
Wi-Fi 5; according to the product description, the Ethernet ports are limited to 100 Mbit/s, which is worth bearing in mind for wired file transfers.
View at Joybuy
Frequently asked questions
Will a mesh system automatically make my project folder available?
No. You need to share files or folders separately with the right people. Microsoft Support explains how to do this in Windows; other storage devices may have different settings.
How can I check whether a Deco unit in the basement is using the Ethernet cable?
According to TP-Link, you can check in the Deco app whether a satellite is using Ethernet backhaul. Also follow the connection instructions for your setup’s router or access point mode.
Can I combine a PX50 with an older powerline Deco?
Not for powerline backhaul with a Deco PX10, P7 or P9: TP-Link says the PX50 uses G.hn, while those other models use HomePlug AV. Also check that the sockets and electrical wiring are suitable for your setup.
What ongoing costs and support should I check?
Check which features require a subscription for the exact model you’re considering. An independent test mentions paid access for some advanced features of the Deco X50. FRITZ! lists regular updates and a five-year manufacturer’s warranty for the Mesh Set 4200; this information doesn’t automatically apply to other systems.
Do I need a licence for ordinary home Wi-Fi in the Netherlands?
According to the Dutch Authority for Digital Infrastructure, Wi-Fi on designated frequencies and under the applicable conditions of use is licence-exempt. Licence-exempt use of frequencies doesn’t require notification or registration. Use equipment with the required CE marking and follow the instructions for use.