Who is this choice relevant to?

Groups with a weak connection between rooms

For people working in a room beyond the kitchen, the connection between mesh nodes matters before extending Wi-Fi coverage further afield is likely to help. The Consumentenbond recommends keeping obstacles between Wi-Fi nodes to a minimum.

Groups with a possible cable route

If you can run a network cable to the workspace, you can compare Ethernet backhaul with a wireless connection. In its test of the ASUS ZenWiFi BD4 3-pack, Tweakers reported strong performance with wired satellites.

Groups with lots of guest devices

Guest access can be useful when participants are joining temporarily. Also check the ports and security settings available on the exact set you’re considering; the Consumentenbond lists a guest network as a feature of the Deco X50 (3-pack).

What should you look for in mesh Wi-Fi for group work?

Wireless backhaul

When to choose it: if you can position the mesh nodes so they maintain a good connection to each other, without running cables through the kitchen.

Trade-off: in Tweakers’ test of the Deco X50, speeds were lower via more distant wireless satellites. This applied to the set and setup tested.

Ethernet backhaul

When to choose it: if you can run a network cable between the rooms and want a wired connection between the mesh nodes.

Trade-off: you’ll need a cable route. Tweakers found that the tested ZenWiFi BD4 3-pack was slower with wireless backhaul than with wired backhaul.

Powerline backhaul

When to choose it: if the wireless connection isn’t good enough, running an Ethernet cable isn’t practical and suitable sockets are available.

Trade-off: TP-Link describes the Deco PX10 as a system that uses Wi-Fi and your home’s electrical wiring to transfer data between units. You’ll need to check how well it works in your own home.

What to consider What to look for when buying Who is this important to?
Connection between rooms Decide where the nodes can go and compare wireless, Ethernet and, where available, powerline backhaul for the exact set. If the kitchen is between the router room and the workspace, I want the mesh nodes to connect well to each other. Around 36% of consumers put the connection between rooms at the top of their list.
Simultaneous use Look at tests of the exact set with wireless satellites and check which Wi-Fi versions the laptops and phones support. When several people are working at the same time, I want to know whether the connection remains usable through the mesh node in the workspace. Around 29% of consumers give simultaneous use top priority.
Installation and running costs Check how many nodes you need, what your cable options are and whether any features you want require a subscription. If I don’t want to run a cable, I weigh up the installation against the features I actually need. Around 21% of consumers put installation and running costs first.
Guest access and management Check whether the exact model offers guest access and how updates and security settings are managed. When participants change, I want to be able to give guests access and keep the settings easy to manage. Around 14% of consumers give guest access and management top priority.

Common pitfalls

  • Buying an extra mesh node without checking the connection to it

    A node on the other side of the kitchen may itself have a weak connection to the previous node. In the tested Deco X50 setup, speeds were lower via more distant wireless satellites.

    Test the connection between the nodes first, then see whether Ethernet backhaul or, if that isn’t practical, a suitable powerline option could work for you.

  • Assuming the advertised Wi-Fi speed is the speed every participant will get

    Backhaul, placement and participants’ devices all play a part too. A Wi-Fi class alone won’t tell you how well the connection will work in the workspace.

    Compare tests of the exact set and check which Wi-Fi versions the devices used during the project support.

  • Assuming all security and parental control features are free

    On the Deco X50 tested by Tweakers, advanced security and parental control features required a subscription.

    Before buying, check which features are available without a subscription on the exact model.

    So, if you need those extra features, a subscription could be an ongoing running cost.

Brands to compare

TP-Link

The Deco X50 and PX10 offer different options: wireless or Ethernet backhaul with the X50, and a powerline option with the PX10.

  • Tweakers described the Deco X50 they tested as easy to set up.
  • In that test, speeds were lower via more distant wireless satellites. TP-Link’s description of the PX10 explains the technology, but it isn’t an independent measurement in a kitchen-based setup.

ASUS

The ZenWiFi BD4 is worth considering if you can connect wired satellites and want to compare the ports available on the exact set.

  • Tweakers reported strong performance with wired satellites on the BD4 3-pack they tested.
  • In that test, performance was lower with wireless backhaul, and the number of Ethernet ports was noted as a drawback. This won’t necessarily apply to other sets or pack sizes.

AVM

A FRITZ Mesh set is another option to compare if installation and configuration options matter to you within a FRITZ setup.

  • In a 2024 comparison, Tweakers included a FRITZ Mesh set with two access points and three radio bands.
  • That tested configuration doesn’t show how a different or current FRITZ combination will perform in your home.

Netgear

The Orbi RBK762 is an example of a different tri-band option for nodes placed wirelessly.

  • Tweakers included the RBK762 in a 2024 comparison.
  • That test doesn’t cover every Orbi model or how a specific set will perform in your home.

Mesh Wi-Fi products at Joybuy

This selection includes mesh Wi-Fi products you can compare by their connections between rooms and relevant features for each model. Check which type of backhaul and which connections will suit your home.

TP-Link Deco E4 3-pack mesh Wi-Fi system

TP-Link Deco E4 (3-pack)

An option to compare for mesh coverage across several rooms; the listed Ethernet ports are limited to 100 Mbps.

Dual-band Wi-Fi 5 (802.11ac), 2.4 GHz and 5 GHz.

View at Joybuy
TP-Link Deco PX10 mesh Wi-Fi system

TP-Link Deco PX10

According to TP-Link, the PX10 offers a powerline option that uses Wi-Fi and your home’s electrical wiring to connect the units. Check how well it works with the sockets you plan to use.

Dual-band Wi-Fi 6 (802.11ax), 2.4 GHz and 5 GHz.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band mesh router

Huawei eKit OptiX FG736 BE3600

Compare the mesh router with the needs of your devices and the connection you need between rooms.

Dual-band Wi-Fi 7 (802.11be).

View at Joybuy
Linksys Velop Pro 7 tri-band mesh Wi-Fi system

Linksys Velop Pro 7

Compare the Wi-Fi versions supported by participants’ laptops and phones; a newer Wi-Fi generation alone won’t tell you how the connection will perform beyond the kitchen.

Tri-band Wi-Fi 7 (802.11be), 2.4 GHz, 5 GHz and 6 GHz.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack mesh Wi-Fi system

TP-Link Deco XE75 Pro (3-pack)

Check how the set can be connected at the locations you have in mind, and compare it with the devices participants will be using.

Tri-band Wi-Fi 6E (802.11ax), 2.4 GHz, 5 GHz and 6 GHz.

View at Joybuy

Frequently asked questions

Where should you put a mesh node if the kitchen is between the rooms?

Place a wireless mesh node somewhere it can still maintain a good connection to the previous node, then test the connection in the workspace. The Consumentenbond recommends keeping obstacles between nodes to a minimum; moving a node closer to the centre of your home may help if the signal is weak at the far end.

Do all devices need to support Wi-Fi 6 or Wi-Fi 7?

No. Devices with older Wi-Fi versions can still connect, but they won’t benefit from the improvements of Wi-Fi 6. Don’t choose a set based on its version number alone: placement and the connection between mesh nodes are still important.

What should you check if temporary participants need access?

Check whether the set offers a guest network, choose a strong password and keep the router and Wi-Fi devices up to date. The exact options depend on the model.

What are your rights if an online purchase doesn’t suit you or turns out to be faulty?

For online purchases, you generally have a statutory 14-day cooling-off period from delivery, subject to applicable exceptions. A seller must also put things right if a product doesn’t perform as you could reasonably expect under normal use; a manufacturer’s warranty doesn’t replace your statutory rights. ACM ConsuWijzer explains these consumer rights.

Do you need a licence to use Wi-Fi at home in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, you don’t need a licence to use Wi-Fi at home if you use the designated frequencies and comply with the conditions of use. Radio equipment is also subject to separate product requirements; this general information doesn’t confirm that a specific product meets them.