For an upstairs desk, ethernet backhaul is the most straightforward choice if you can run a network cable between floors. Without a cable, the connection and video playback depend more on the placement of the mesh points and the wireless link between them. Then check which ports will be available, how the system connects to your existing router, and whether your playback device supports the files directly.
Who is this choice for?
Video viewer with a cable upstairs
You can connect the floors using ethernet and want to watch locally stored video at your desk. Focus on the backhaul setup and the ports that will still be available afterwards. TP-Link Netherlands explains ethernet backhaul for Deco.
Video viewer without a network cable
You need the connection to pass through or around the floor wirelessly. The placement of both mesh points and the link between them are then important considerations. The Dutch Authority for Digital Infrastructure (RDI) notes that 5 GHz has a shorter range than 2.4 GHz.
Desk with wired devices
You want to connect a computer upstairs and may also want to connect your video server by cable. So count the usable ports on each mesh point, allowing for the backhaul connection. ASUS Netherlands describes the setup requirements for AiMesh and ZenWiFi ethernet backhaul.
What should you look for in mesh Wi-Fi for video and an upstairs desk?
First decide how the mesh points can connect to each other. Then look at ports, placement and how the system connects to your existing network.
Ethernet backhaul
Choose this when: there is a usable network cable between the floors, or you can install one.
Bear in mind: you will need to run a cable and configure the ports and router correctly. Check that there is still a port available for your computer.
Wireless backhaul
Choose this when: running a cable is not practical and you can position the points where they can maintain a connection to each other.
Bear in mind: distance, floors and placement affect the wireless connection; a quoted Wi-Fi speed is not a measurement of the speed at your desk.
Powerline between mesh points
Consider this when: ethernet is not an option and the floor significantly weakens the wireless connection. TP-Link lists the Deco PX50 as an option that uses your mains wiring to communicate.
Bear in mind: the product name does not tell you whether your home's electrical wiring is suitable. Also check the exact model and its ports.
| What to consider |
What should you check? |
Who is this important for? |
| Connection between floors |
Is ethernet backhaul possible? If not, where can you place the points, and which backhaul methods does the system support? |
If I want uninterrupted access to my video library upstairs, I need to get the connection between floors right first. Around 36% of consumers put this connection first. |
| Ports and local playback |
Count the ports left after connecting the router and backhaul. Also check that the playback device supports the container, codec and resolution. |
If I want to connect both the server and computer by cable, I need to check the usable ports and compatibility with my video files. Around 29% of consumers prioritise this combination. |
| Coverage and placement |
Work out where both points can go and whether the upper point can still connect to the lower one from there. |
If the floor and distance make the route difficult, I want to know where I can place the mesh points first. Around 21% of consumers put coverage and placement at the top of their list. |
| Compatibility and running costs |
Check the router or access point mode, how many points you need, and whether the software features you want require a subscription. |
If I want to keep using my existing router and understand the ongoing costs, I look at the setup and any extra features. Around 14% of consumers start with compatibility and costs. |
Common buying mistakes
-
Looking only at the quoted Wi-Fi range or top speed
Those figures do not tell you how well the connection will pass through your floor; the placement of the mesh points matters too.
First map out the possible route between floors and where each point could go. Only then compare the systems and their wireless specifications.
If the connection is not up to scratch, you may need to reposition the points, add another one or run a cable after all.
-
Counting a port that is already needed for backhaul
A mesh point may use a port to connect to the router or another point, leaving it unavailable for a computer.
Map out the connections for the router, server, mesh points and desk, then count the free ports on each point. TP-Link lists three gigabit ports per Deco X50 point; check which port your setup will use.
If there are not enough connections, you may need an additional network switch.
-
Blaming Wi-Fi for every glitch in locally stored video
Plex Support explains that direct playback depends on factors including a compatible container, bitrate, codec and resolution. If a file is not compatible with the playback device, the server may need to convert it.
If playback stutters, also check the playback mode and whether the device you are using supports the file.
-
Assuming a product listing confirms every model detail
The Joybuy listing mentioned for the Deco PX50 gives conflicting numbers of ethernet ports and says the product is no longer available.
Before buying, check the exact model and its ports against the manufacturer's specifications. Do not treat a listing with conflicting details as confirmation that the product is suitable.
Brands to consider
TP-Link
The Deco X50 is a Wi-Fi 6 mesh option with gigabit ports on each point. The Deco PX50 is a separate model that TP-Link describes as using mains wiring for communication between points.
- TP-Link explains ethernet backhaul for Deco and step-by-step setup using the app.
- The X50 and PX50 are different models; do not assume the port counts or backhaul features of one apply to the other.
ASUS
The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh option with AiMesh settings.
- ASUS Netherlands lists two 2.5G ports per point and supports access point and AiMesh node modes.
- There are setup requirements when using a switch for backhaul; two ports per point does not automatically mean two ports are free for devices.
NETGEAR
The Orbi 770 RBE772 is a tri-band option for a wireless connection between mesh points or a wired 2.5G backhaul.
- NETGEAR describes an improved tri-band backhaul and a wired 2.5G option.
- These are manufacturer specifications, not a measurement taken at an upstairs desk. Compare the connections with the devices and network setup in your own home.
Joybuy products
These Joybuy picks are mesh systems for connecting floors, where ethernet backhaul is an option. If you are buying equipment in the Netherlands, check that the specific device carries the CE marking; the RDI says this marking must appear on the equipment.
No image available
ASUS ZenWiFi BD4, dual-band Wi-Fi 7
Suitable for a mesh setup where wired backhaul and wired devices are important.
ASUS Netherlands lists two 2.5G ethernet ports per point; check which connection will be used for backhaul.
Joybuy
No image available
TP-Link Deco X50, 3-pack, Wi-Fi 6
A three-point system to consider if you want a setup with multiple mesh points.
TP-Link Netherlands lists three gigabit ports per X50 point. Remember to allow for the backhaul port before connecting wired devices.
Joybuy
No image available
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E
Suitable if you are considering a tri-band Deco mesh system with three points for connecting floors.
The product name lists tri-band Wi-Fi 6E and the 2.4 GHz, 5 GHz and 6 GHz bands. A newer generation of Wi-Fi does not, by itself, guarantee a better connection through the floor.
Joybuy
No image available
TP-Link Deco XE75, 3-pack, tri-band Wi-Fi 6E
A three-point system for anyone considering a Deco setup with multiple points.
The product name lists tri-band Wi-Fi 6E and the 2.4 GHz, 5 GHz and 6 GHz bands. Assess the connection between points based on where you can position them in your home.
Joybuy
No image available
TP-Link Deco X50, 2-pack, Wi-Fi 6
Suitable for a two-point setup to connect to a desk upstairs.
TP-Link Netherlands lists three gigabit ports per X50 point. Check which ports will be available after connecting the router and backhaul.
Joybuy
Frequently asked questions
Will faster internet automatically make my local video library easier to access?
Not necessarily. For playback on the same home network, the local network route and the capabilities of the playback device matter. Plex Support notes that upload speed can also be important when streaming from outside your home.
Where should I connect a Deco point for ethernet backhaul?
That depends on the router or access point mode you have chosen. TP-Link describes different connection options; after setup, check in the Deco app that the backhaul is actually using ethernet.
Do I need a licence or registration to use mesh Wi-Fi at home in the Netherlands?
According to the RDI, home Wi-Fi on the designated frequencies and in line with the conditions of use does not require a licence. The RDI says there is no notification or registration requirement for this licence-exempt frequency use.
What should I check when buying Wi-Fi equipment for use in the Netherlands?
The RDI says the correct CE marking must appear on the equipment. Check the marking on the specific device; a product description alone does not confirm that the item carries it.
What running costs might I have after buying?
Mesh points use electricity while they are switched on. Also check whether the management or security features you want are included with your chosen model or require a subscription.