Who is this choice relevant to?

A household with thick internal walls

You want to use a media server in several rooms and are mainly looking for a reliable connection between your Wi-Fi points. Ethernet backhaul and powerline, as used in the Deco PX50 setup, are different options to consider.

A household with a shared media server

You want to know whether TVs and other playback devices will still find the server on your home network after you install a new mesh router or set up a guest network. Synology Knowledge Center explains how a media server makes media available to devices on the local network.

A household with existing network cables

You can connect your mesh points by cable and want to make sure the connections work for your server and wired playback devices. Check the ports on each point and plan where to run the cables.

What should you look for when choosing?

Ethernet backhaul

Suitable when: you can use network cables between suitable locations.

Bear in mind: the cables and available ports determine where you can place the points; wired backhaul doesn’t guarantee good Wi-Fi reception in every room.

Powerline backhaul

Suitable when: running cables isn’t practical and you want to see whether communication over your home’s electrical wiring will work.

Bear in mind: the connection depends on your home’s wiring and needs to be tested at the sockets you plan to use.

Wireless backhaul

Suitable when: you can place mesh points where they have a sufficiently strong signal between them, and you don’t want to use cables or powerline.

Bear in mind: the connection between the points still depends on the signal path through your home; adding another point behind a hard-to-reach wall won’t automatically fix a weak backhaul.

What to consider What to check before buying Who is this important to?
Connection between mesh points Check whether Ethernet backhaul is possible; otherwise, consider powerline or test the wireless connection in the planned locations. TP-Link describes Ethernet backhaul as an option when walls disrupt the wireless connection. If thick walls could weaken the connection between points, I want to know first which backhaul will work in the locations I have in mind. Around 36% of consumers prioritise the connection between points.
Access to the media server Check how the router organises your home network and whether a guest network or network isolation blocks access to the server. After installation, check from each playback device you plan to use that the server is visible. I want TVs and other devices to be able to find the shared server on my home network, not just connect to the internet. Around 29% of consumers prioritise access to the media server.
Coverage for playback devices Test the connection where you watch or listen. Also check how many mesh points are included and whether any fixed devices could be connected by cable. If several rooms or playback devices are involved, I want to assess the connection where they’ll actually be used. Around 21% of consumers prioritise coverage across several playback locations.
Ports and installation Check the number of units in the set, the ports on each point and which cables or other components you’ll need. Only compare versions with connections that clearly suit your setup. I want to know in advance whether the set will work with my existing router, wired devices and available cables. Around 14% of consumers prioritise a practical installation and the components they need.

Common buying mistakes

  • Assuming an extra wireless point will fix a weak connection between points

    A mesh point also needs to stay connected to the rest of the network to pass traffic to your media server. So an extra point could end up in the wrong place without improving the connection.

    Test the connection in the locations you have in mind and compare Ethernet backhaul or, where suitable, powerline before adding more points.

    An extra point could take up space without noticeably improving the connection.

  • Taking the advertised speed or coverage as a guarantee for your home

    Manufacturer specifications don’t measure the connection between your mesh points or access to your media server through thick walls.

    First assess the route between the points, then test the connection where you plan to play media.

  • Testing only the internet connection after installation

    A device can have internet access but still be unable to reach devices or files on the local network. A guest network may block access to the private network, as Synology Knowledge Center explains.

    Check from each playback device you plan to use that the media server is visible, and review the settings for guest networks, router mode and local network access.

  • Assuming the same model name means the same version in every shop

    On the Joybuy page we checked for the Deco PX50 (2-pack), the port information is contradictory: different parts of the page list one and three Ethernet ports per device.

    Check the ports on the exact version with the retailer, and compare that information with the manufacturer’s details before relying on a particular number of connections.

    A version with fewer ports than your setup needs could mean you’ll need a different connection solution.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system with an Ethernet backhaul option. According to TP-Link, the Deco PX50 adds G.hn powerline for communication between points when walls disrupt the wireless connection.

  • The Dutch product information lists three gigabit ports per point for the Deco X50.
  • TP-Link describes the PX50 as combining Wi-Fi and powerline to connect Deco units.
  • The Joybuy page we checked for the PX50 (2-pack) contains conflicting information about the number of Ethernet ports per device. Check the exact version before relying on those ports.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option for a setup with Ethernet backhaul, provided you have suitable wall sockets.

  • ASUS describes using Ethernet backhaul through Ethernet ports in the wall.
  • Advertised coverage and speed don’t measure Wi-Fi reception through the walls in your home. Also check the set version and available ports.

FRITZ!

The FRITZ!Mesh Set 1700 is an option to compare if you want to keep using an existing router.

  • FRITZ! says the set can connect to another router via LAN and gives this product a five-year manufacturer’s warranty.
  • Check that the ports and connection method on your chosen set will work for both the backhaul and your wired devices. The manufacturer’s warranty does not replace your statutory rights in the Netherlands.

NETGEAR

The Orbi RBK763S is a tri-band Wi-Fi 6 set with a router and two satellites, worth comparing if a wireless connection between points seems feasible.

  • NETGEAR specifies a dedicated backhaul for this model.
  • That doesn’t prove the connection will work through the walls in your home. Compare your planned placement and the available ports; don’t take the advertised combined speed as real-world performance.

eero

The eero 6+ is a Wi-Fi 6 mesh option to compare if app-based setup and expandability matter to you.

  • The Amazon product page describes app-based setup, expandability and automatic updates.
  • According to the product page, some additional network and security features are available with a separate subscription. This doesn’t mean wireless backhaul will work better in your home.

Mesh Wi-Fi products on Joybuy

This selection includes mesh systems for powerline or Ethernet backhaul setups, as well as sets with multiple mesh points. Check that the connections and installation for each version will work with your network.

TP-Link Deco PX10 dual-band Wi-Fi 6 mesh

TP-Link Deco PX10 dual-band Wi-Fi 6 mesh

Worth considering if you’re looking for a mesh system with powerline backhaul to connect the points.

The product description lists Wi-Fi 6 and powerline over your home’s electrical wiring.

The product description lists three gigabit ports per device and router or access point mode.

Joybuy
TP-Link Deco X20, set of two mesh units

TP-Link Deco X20 (2-pack)

Worth considering if you want to connect mesh points with a network cable.

The product description identifies this set as two Deco X20 units with Wi-Fi 6 and Ethernet backhaul.

Joybuy
TP-Link Deco X50, set of three mesh units

TP-Link Deco X50 dual-band Wi-Fi 6 (3-pack)

Worth considering if you want to compare a set of three mesh points with a wired backhaul option.

The product title lists Wi-Fi 6 and a set of three units. TP-Link lists three gigabit ports per point for the Deco X50 and describes Ethernet backhaul as an option.

Joybuy
TP-Link Deco XE75 Pro, tri-band Wi-Fi 6E mesh, set of three

TP-Link Deco XE75 Pro tri-band Wi-Fi 6E (3-pack)

A set with multiple mesh points to compare as you plan the placement and wired connections for your home.

The product information lists Wi-Fi 6E, three units and three Ethernet ports per unit.

Joybuy

Frequently asked questions

Should my media server be on the guest network?

No, not if playback devices need to access the server from the private network and you haven’t set up access between the networks. A guest network may block access to the private network. Check your router settings and test whether the devices you plan to use can find the server.

How can I check whether a Deco point is communicating over a network cable?

According to TP-Link, you can select a satellite in the Deco app to see whether Ethernet backhaul is active. In router mode, follow the described connection through the LAN side of the main Deco; the available connections differ in access point mode.

What can I do if a mesh point develops a fault prematurely?

For a consumer purchase in the Netherlands, statutory rights apply in addition to any manufacturer’s warranty. If a product develops a fault earlier than you could reasonably expect with normal use, the retailer must offer an appropriate solution free of charge, according to ACM ConsuWijzer. There is no single fixed statutory warranty period in the Netherlands for every device.

Do I need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi in the Netherlands is an example of licence-exempt frequency use, with no notification or registration requirement, provided the relevant conditions of use are met. This says nothing about the connection in your home: test the backhaul and reception in the locations you plan to use.