If you can run a network cable to the lounge, ethernet backhaul means the connection between mesh points does not have to pass through the thick wall. Without a cable, consider wireless mesh if an intermediate point can still get a good signal from the main unit, or powerline mesh if compatible units are on the same electrical circuit. Also check how the screen will connect and test the connection where it will be used; advertised coverage and speeds are no guarantee of the results you’ll get in your home.
Who is this choice relevant to?
You can run a cable to the lounge
Your main priority is a reliable connection for the shared screen, and you can run a network cable to a mesh point near the lounge. Compare ethernet backhaul and the available ports before choosing a system. TP-Link Netherlands explains ethernet backhaul for Deco systems.
No cable, but room for an intermediate point
You can’t run a cable and need to find a spot where a wireless mesh point can still get a good signal from the main unit. TP-Link Netherlands points out that walls, floors and metal can interfere with wireless signals.
The wireless connection struggles to get through
If thick walls also make it difficult for wireless mesh points to connect to each other, you could look into powerline mesh. TP-Link says this requires compatible PX50 units on the same electrical circuit.
What should you look out for?
Ethernet backhaul
Choose this if: you can run a network cable between the main unit and the point near the lounge.
Bear in mind: you’ll need to run a cable and have the right ports; for Deco, follow the instructions for router or access point mode.
Fully wireless mesh
Choose this if: running a cable isn’t possible and you can find a spot for an intermediate point with a strong enough connection to the main unit.
Bear in mind: walls, floors and metal can weaken the connection between the points.
Powerline backhaul
Choose this if: you can’t run a network cable and can use compatible powerline units on the same electrical circuit.
Bear in mind: powerline functionality depends on the exact models; TP-Link specifies two or more PX50 units on the same electrical circuit for PX50.
| What to consider |
What should you check? |
Who is this important for? |
| Connection between the points |
Check whether the system you choose supports ethernet backhaul and whether there’s a practical route for the cable. Also check whether you’ll still have a port available for the screen. |
If I mainly want a reliable connection between the router and the lounge point, I’ll prioritise running a cable; around 36% of consumers put wired reliability first. |
| Positioning without a cable |
Choose a spot where the intermediate point can still get a good signal from the main unit, and check the connection once it’s in place. An advertised coverage figure can’t predict how the signal will pass through these walls. |
If I don’t want to run a cable, I’ll look for a practical spot for a wireless intermediate point; around 29% of consumers prioritise flexibility in where they can position it. |
| Powerline compatibility |
Check the exact combination of units and whether they’re on the same electrical circuit. TP-Link lists PX50 units as the compatible combination for PX50 powerline backhaul. |
If I can’t run a cable and a wireless intermediate point seems difficult, I’ll look into using the electrical wiring; around 21% of consumers prioritise this option. |
| Ports and shared use |
Check how the screen connects, how many ports will be left after setting up the backhaul, and which network management features the exact model offers. |
If the connection route is practical, I’ll also want to manage ports and access for shared users; around 14% of consumers put this management first. |
Common buying mistakes
-
Assuming advertised coverage guarantees a signal behind thick walls
A wireless point may reach the lounge while its connection back to the main unit remains weak. Adding another point beyond the same barrier won’t automatically fix a poor connection between the mesh points.
First, decide on your backhaul route and check the connection in the intended locations once everything is set up. TP-Link explains how to check in the Deco app whether a point is connected via ethernet backhaul.
-
Choosing powerline units based only on the product family
According to TP-Link, PX50 does not provide powerline backhaul with PX10, P9 or P7. So a unit from the same Deco family won’t necessarily work for the powerline connection you have in mind.
Before adding more units, check the exact models and make sure the compatible units are on the same electrical circuit.
Brands to compare
TP-Link
The Deco range offers different setup options, including the X50 with optional ethernet backhaul, the PX50 with built-in powerline, and the X50-PoE for a PoE setup.
- TP-Link describes ethernet backhaul for the X50 and G.hn powerline for the PX50.
- PX50 powerline requires compatible PX50 units on the same electrical circuit. Also check the exact version, ports and setup requirements.
ASUS
The ZenWiFi XT9 is a tri-band Wi-Fi 6 option to compare with other wireless mesh setups.
- ASUS lists separate 5GHz bands and a range of model and package options.
- Advertised radio speeds are product specifications, not measurements taken behind the walls in your lounge. Check the version you’ve chosen and its setup requirements.
NETGEAR
The Orbi 770 series is a tri-band Wi-Fi 7 alternative to compare if you’re also considering wired backhaul.
- NETGEAR lists a 2.5G wired backhaul option for the Orbi 770 series.
- The advertised maximum Wi-Fi speed and coverage don’t show how the system will perform in your home or whether it will work better than a suitable wired Wi-Fi 6 system.
Joybuy products for a wired setup
These products are mesh options for a setup where you can use ethernet backhaul between mesh points. For each version, check that the ports and setup requirements suit your screen and cable route.
No image available
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, White, 2-pack
A mesh option to consider if you can run a wired backhaul to the lounge point.
Dual-band (2,4 GHz / 5 GHz); Wi-Fi 7 (802.11be); 2-pack.
Joybuy
No image available
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack
A mesh option to compare if you can run a cable between the mesh points.
Wi-Fi 6; 2-pack.
Joybuy
No image available
TP-Link Deco X50 Dual-Band Wi-Fi 6, 3-pack
A mesh system to consider if you want to position multiple points and can use ethernet backhaul.
Dual-band (2,4 GHz / 5 GHz); Wi-Fi 6 (802.11ax); 3-pack.
Joybuy
No image available
TP-Link Deco X50-PoE Dual-Band Wi-Fi 6, 2-pack
A mesh option to look at if PoE suits your setup and you have a cable route to the lounge point.
Dual-band (2,4 GHz / 5 GHz); Wi-Fi 6 (802.11ax); 2-pack.
Joybuy
No image available
TP-Link Deco X50 Dual-Band Wi-Fi 6, 2-pack
A mesh option to consider if you can set up wired backhaul between two mesh points.
Dual-band (2,4 GHz / 5 GHz); Wi-Fi 6 (802.11ax); 2-pack.
Joybuy
Frequently asked questions
Do I need a licence to use Wi-Fi in a shared lounge?
No. In the Netherlands, the National Inspectorate for Digital Infrastructure cites Wi-Fi as an example of licence-exempt frequency use, with no notification or registration requirement. This doesn’t mean equipment can be placed on the Dutch market without meeting the applicable product requirements.
Where should I put a wireless mesh point?
Don’t automatically put it behind the thickest wall next to the screen; choose a spot where the point can still get a good signal from the main unit. For Deco, TP-Link advises taking walls, floors, metal and electrical appliances into account, and checking the connection again after moving the point.
Can I mix different powerline Deco units?
Not without checking the exact models. TP-Link says PX50 does not provide powerline backhaul with PX10, P9 or P7; for PX50 powerline, the manufacturer specifies compatible PX50 units on the same electrical circuit.
How can I check whether Deco is connected via ethernet after setup?
According to TP-Link, you can select a satellite in the Deco app to see whether ethernet backhaul is active. If you’re connecting via a switch, follow the instructions for the router or access point mode you’re using.
What if a system I’ve bought breaks down too soon under normal use?
According to ACM ConsuWijzer, the retailer is responsible for the statutory guarantee if a product doesn’t do what you could reasonably expect. Depending on the circumstances, the retailer must repair or replace the product free of charge, or you may be entitled to a refund; the length of a manufacturer’s guarantee doesn’t replace this right.