Who is mesh Wi-Fi suitable for?

Reader behind thick walls

You download magazines in a room where your existing Wi-Fi signal is weak. The Consumentenbond points out that walls and other obstacles can interfere with the signal, so also check how an additional node connects to the rest of your network.

Homeowner with a network cable

You can connect a Wi-Fi node behind the wall using a cable and want to make the most of that option. TP-Link and ASUS describe ethernet backhaul for certain systems, so check that this feature is available on the exact model you’re considering.

Homeowner without the option of running a cable

You don’t want to run an ethernet cable and need to choose between wireless mesh and a powerline connection. The Consumentenbond explains the importance of placement, while TP-Link and devolo offer powerline solutions whose performance depends on the standard used and the electrical installation.

What should you consider when choosing?

Mesh with ethernet backhaul

Suitable when: there’s already a usable network cable running to the room beyond the wall, or you’re happy to install one.

Trade-off: the nodes connect to each other over the cable, but you’ll need cabling and may need to do some extra installation work.

Wireless mesh

Suitable when: you don’t want to run a cable and can place a node where it still receives a usable signal.

Trade-off: walls and distance can also weaken the wireless connection between mesh nodes.

Mesh with powerline backhaul

Suitable when: ethernet isn’t practical and you can test the connection using the wall sockets where you plan to use it.

Trade-off: performance also depends on the electrical installation and interference. Check the powerline standard used by the exact models, too.

What to consider What to look for Who is this important for?
Coverage where you download Identify the room with the weak signal and possible positions for intermediate nodes; check which backhaul options the system supports. If I read in a room behind thick walls, I want both my tablet and the mesh node to have a usable connection. Around 36% of consumers prioritise coverage in that spot.
Reliable downloads Check the connection where you read and what your own device can do; don’t treat maximum speeds as a measure of performance in your home. If I want to download magazines without relying on an advertised top speed, I look for a stable connection where I read. Around 29% of consumers prioritise predictable downloads.
Connections and set-up Check the connection instructions, available sockets, cables and ports, and how the system connects to your existing modem. If I want to keep my existing modem and home layout, the installation needs to work with them. Around 21% of consumers prioritise easy set-up.
Overall set-up Work out how many nodes you need, then compare the set-up, energy consumption and support terms. If I want enough coverage without unnecessary equipment or running costs, I first want to know how many nodes my situation requires. Around 14% of consumers focus mainly on the total cost.

Common buying mistakes

  • Focusing only on maximum speed or advertised coverage

    Walls and placement affect coverage. A theoretical speed claim doesn’t tell you how quickly you can download where you read; the Consumentenbond’s testing method considers factors including speed and ease of use.

    First, identify the weak spot and possible locations for intermediate nodes. Then compare the connection options supported and, where possible, performance in the places that matter to you.

  • Assuming all powerline and mesh nodes are interchangeable

    Systems can use different powerline standards. TP-Link specifies HomePlug AV2 for the Deco PX10, while devolo notes that its product ranges don’t automatically use the same standard.

    Check the standard and expansion options for the exact models before combining nodes.

  • Buying a new system without testing your router’s position

    A poorly positioned existing router can limit coverage. The Consumentenbond recommends checking the router’s position and settings.

    First, test the effect of moving your router, then decide where you need additional mesh nodes.

Brands to compare

TP-Link

According to TP-Link, the Deco X50 offers optional ethernet backhaul, while the Deco PX10 combines Wi-Fi with a HomePlug AV2 powerline connection between units.

  • These two models offer different ways to connect mesh nodes.
  • The PX10’s powerline feature isn’t automatically available on other Deco models. Check the exact model and pack size.

ASUS

ASUS describes the ZenWiFi AX XT8 as a tri-band Wi-Fi 6 system with a wireless backhaul band and an ethernet backhaul option.

  • According to ASUS, the system lets you choose between wireless and wired backhaul.
  • The stated coverage or speed doesn’t tell you how it will perform behind the walls in your home; check the hardware version.

KPN

SuperWifi is a provider-specific mesh option for anyone looking to extend their existing KPN home network.

  • KPN describes placement support and the option to connect nodes by cable.
  • According to KPN, how the first node connects also depends on the modem; don’t assume this means it’s compatible with other providers.

NETGEAR

For compatible Orbi routers and satellites, NETGEAR describes both wireless and ethernet backhaul.

  • NETGEAR’s set-up instructions cover both connection options.
  • NETGEAR recommends updating the firmware before setting up ethernet backhaul; this doesn’t prove how fast the system will be in a home with thick walls.

devolo

Magic is a dedicated mesh Wi-Fi and powerline range for anyone considering using the electrical wiring to connect to another room.

  • The range offers a powerline option to consider if a wireless connection between rooms isn’t up to the job.
  • According to devolo, actual powerline performance also depends on interference and the quality of the electrical installation. Magic doesn’t automatically use the same powerline standard as TP-Link Deco PX10.

Mesh Wi-Fi products at Joybuy

Below are mesh systems for homes with multiple rooms. For each model, check which connections between nodes and which ports are available on the specific version.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

Suitable for a set-up where you want the units to connect over a cable or wirelessly.

Tri-band Wi-Fi 7; the description lists wired connection ports, plus wired and wireless backhaul.

Joybuy
TP-Link Deco E4 3-pack Dual-band Wi-Fi 5

TP-Link Deco E4 3-pack

Suitable for a three-unit mesh set-up covering multiple rooms.

Dual-band Wi-Fi 5; two network ports per unit.

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System 2-pack

Suitable for a two-node set-up where you want to connect the units using ethernet backhaul.

Wi-Fi 6; the description lists ethernet backhaul between the units.

Joybuy
TP-Link Deco X50 3-pack Dual-Band Wi-Fi 6

TP-Link Deco X50 3-pack

Suitable for a three-unit set where you can use ethernet backhaul.

Dual-band Wi-Fi 6; three gigabit ports per unit; optional ethernet backhaul.

Joybuy
TP-Link Deco XE75 Pro 3-pack Tri-Band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack

Suitable for anyone looking for a three-unit mesh system who will check the connection options on the exact model.

The product name specifies tri-band Wi-Fi 6E (2.4 GHz/5 GHz/6 GHz).

Joybuy

Frequently asked questions

Will an extra Wi-Fi node placed just beyond a thick wall help?

Only if the node itself has a usable connection to the network. First, try a position where it can still receive a good signal from the previous node, or use a suitable wired connection.

Do I need to replace my provider’s modem to use mesh?

Not necessarily. Check the connection instructions for the system you choose and your existing modem. In the Netherlands, ACM ConsuWijzer explains that you’re free to choose your own router, provided it meets the applicable requirements. That doesn’t automatically tell you which settings your specific connection needs.

What can I do if powerline performance is inconsistent after installation?

Test the connection using the wall sockets you plan to use and consult the troubleshooting guide for your specific model. According to devolo, factors including interference and the quality of the electrical installation can affect actual performance.

What should I look for in a home Wi-Fi system in the Netherlands?

Check that the specific model has the correct CE marking. The Netherlands’ Digital Infrastructure Inspectorate states that radio equipment placed on the Dutch market must meet the applicable requirements and carry the correct CE marking; a product listing alone doesn’t confirm this.

Do my rights end when the manufacturer’s warranty expires?

Not necessarily. ACM ConsuWijzer distinguishes between a manufacturer’s warranty and statutory guarantee: with normal use, the latter depends on what you can reasonably expect from the product. The retailer is your point of contact.