Who is this choice relevant to?

Someone with a back room out of Wi-Fi range

Wants the signal to reach a hobby room and is weighing up whether the mesh nodes should connect via cable, Wi-Fi or the mains. Walls and other obstacles can affect Wi-Fi reception, notes the Consumentenbond.

People using a shared workspace

Have several devices connected at once and want a reliable connection and enough ports for work equipment. The Consumentenbond warns that the Wi-Fi version alone does not tell you how well a system will perform.

Someone managing an existing home network

Wants to keep their provider’s router and add Wi-Fi nodes without accidentally changing the router’s role. TP-Link describes access point mode as a way to let the existing router manage the network functions.

What should you consider when choosing?

Ethernet backhaul

A good fit when: you can run a network cable between the rooms and your mesh nodes support Ethernet backhaul.

Bear in mind: you’ll need to plan the cable route and allow for the ports required by your router and any wired devices.

Wireless mesh

A good fit when: you can’t run cables and an intermediate node still gets a usable signal where you plan to place it.

Bear in mind: distance, walls and network traffic can all affect the connection between nodes.

Powerline backhaul

A good fit when: there’s no cable, wireless reception is too weak and the nodes you choose can communicate over your electrical wiring.

Bear in mind: according to TP-Link, Deco PX50 PLC backhaul requires compatible PX50 nodes on the same electrical circuit; a connection is not guaranteed in every home.

What to consider What to look for when buying Who is this important for?
Coverage in the hobby room Check whether the kit supports Ethernet backhaul and where a wireless intermediate node can still get a signal. Tweakers describes a wired connection between nodes as a stable option. If I want to sort out a dead zone at the back of the house, I’ll focus on where the extra node gets its connection from. Around 36% of consumers say coverage in the hobby room is their top priority.
Using several devices at once Compare wired and wireless backhaul; according to the Consumentenbond, the Wi-Fi version alone doesn’t predict performance in your home. When several people are online in the workspace at once, I want to know how the nodes will stay connected to each other. Around 29% of consumers put simultaneous use first.
Ports for wired devices Count how many ports will be left after connecting the router and any backhaul. TP-Link lists three gigabit ports per Deco X50 node; ASUS lists two 2.5G WAN/LAN ports per ZenWiFi BD4 node. If my desk equipment needs a wired connection, I want to know how many ports will be free nearby. For around 21% of consumers, ports for wired work devices are the main priority.
Fitting into your existing network Check whether the kit has access point mode and find out how to connect everything in that mode. TP-Link describes access point mode as an option for using an existing router that continues to manage the network functions. If I want to keep my provider’s router and manage additional nodes, I’ll also consider the power consumption of the kit. Around 14% of consumers prioritise keeping their existing network and running costs.

Common buying mistakes

  • Placing an extra mesh node in a dead zone

    The node at the back of the house still needs a connection to the rest of the network. Walls and distance can weaken wireless reception.

    First, check where the node will get its connection from. If you can run a cable, check that the kit supports Ethernet backhaul.

    Adding a node or running a cable may mean extra installation work.

  • Assuming any powerline product will work with a mesh kit

    According to TP-Link, Deco PX50 PLC backhaul only works between compatible PX50 nodes on the same electrical circuit; separate adapters and other Deco powerline models do not provide PLC backhaul with it.

    Check the exact model combination and test the connection using the sockets you plan to use.

    An incompatible node or separate adapter may not work for this connection.

  • Choosing based only on the Wi-Fi generation or stated range

    The Wi-Fi version alone won’t tell you how a kit performs in a home with obstacles; the connection between the nodes and where you place them matter too.

    Compare the available backhaul options and where you can position the nodes, rather than relying only on a theoretical speed claim.

  • Confusing the manufacturer’s warranty with all your legal rights

    ACM ConsuWijzer distinguishes between a manufacturer’s or seller’s warranty and your statutory rights.

    Keep your proof of purchase and discuss any fault with the seller; the right solution will depend on the circumstances.

Relevant brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh kit with Ethernet backhaul; the Deco PX50 is worth considering if you’re looking at the powerline option.

  • TP-Link lists three gigabit ports per Deco X50 node and support for optional Ethernet backhaul.
  • According to TP-Link, PX50 only provides PLC backhaul with compatible PX50 nodes on the same electrical circuit; this does not mean universal compatibility or guaranteed performance.

ASUS

The ZenWiFi BD4 is worth comparing if you’re looking at a dual-band kit with wired connectivity.

  • According to ASUS, the BD4 has two 2.5G WAN/LAN ports and an access point mode.
  • ASUS’s specifications list 2.4 and 5GHz bands; don’t assume this model has a separate 6GHz band.

FRITZ!

The FRITZ!Repeater 1200 AX is an extension option for a compatible existing FRITZ! mesh setup, rather than an automatic like-for-like replacement for a two-node kit.

  • FRITZ! describes central management via a Mesh Master and the option to connect FRITZ! devices with a LAN port using a network cable.
  • Check whether your existing router and the specific combination of devices support the mesh functions you want.

Joybuy product picks

This selection includes mesh kits for two-node or multi-node setups, including options that specify Ethernet backhaul or ports for wired devices. Before buying, check the CE marking and relevant documentation for the specific product; the Dutch Authority for Digital Infrastructure stresses that a product listing alone does not prove conformity.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

Worth a look if you’re considering a two-node setup with a cable between the mesh nodes.

The product name specifies a 2-pack.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack)

A two-node option to compare if you’re looking for a mesh kit to cover several rooms.

The product name specifies tri-band, 2.4, 5 and 6GHz bands, and Wi-Fi 7.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A multi-node option to consider if you want to use Ethernet backhaul between the Deco nodes.

The product name specifies dual-band, 2.4 and 5GHz bands, and Wi-Fi 6.

View at Joybuy
TP-Link Deco X50-POE (2-pack), Wi-Fi 6

TP-Link Deco X50-POE (2-pack)

A two-node option to compare if the stated PoE version suits the wired installation you have in mind.

The product name specifies dual-band, 2.4 and 5GHz bands, and Wi-Fi 6.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack)

A three-node option to compare if you’re planning to cover several rooms.

The product name specifies tri-band, 2.4, 5 and 6GHz bands, and Wi-Fi 6E.

View at Joybuy

Frequently asked questions

Do I need to replace my internet provider’s router?

Not necessarily: TP-Link describes access point mode as a way to keep your existing router in charge of the network functions. The connection order varies by mode, so follow the instructions for your chosen kit.

Can a Deco PX50 work with a separate powerline adapter as one PLC mesh network?

No. According to TP-Link, PX50 does not provide PLC backhaul with separate powerline adapters; you need compatible PX50 nodes on the same electrical circuit.

How can I check whether the problem is with Wi-Fi or my broadband package?

First, measure your internet speed using a computer connected by network cable. A test over weak Wi-Fi in the back room won’t measure only the connection from your provider.

Do I need a licence for Wi-Fi in the Netherlands, and what should I check on the device?

According to the Dutch Authority for Digital Infrastructure, home Wi-Fi does not require a licence when you use the designated frequencies and comply with the conditions of use. Radio equipment placed on the market in the Netherlands must meet applicable requirements, including CE marking; check this for the specific product.

Do I lose my right to support as soon as the manufacturer’s warranty expires?

No. ACM ConsuWijzer distinguishes between a manufacturer’s or seller’s warranty and your statutory rights. Discuss any fault with the seller, as the appropriate solution depends on the circumstances.