Who is this relevant for?

Video caller in the back room

You want to know whether calls in your hobby room will remain usable when someone else is on a call elsewhere in the house. Consider both the connection between the mesh nodes and the upload capacity of your internet connection.

Living with difficult walls

You can’t assume you’ll get a strong wireless connection throughout your home. Compare a cable, a well-positioned node and powerline if your electrical setup is suitable.

Extending an existing network

You want to extend coverage to the back of the house without replacing your existing router setup unnecessarily. The connection mode and compatibility with your current network will determine which extension is right for you.

What should you look for when choosing?

First decide how the mesh node at the back of the house will connect to the main network. Then check whether your internet connection can handle simultaneous calls.

Ethernet backhaul

Choose this if: you can run a network cable to or near the hobby room and your chosen mesh nodes support this connection.

Bear in mind: you’ll need to run a cable and have suitable ports. Also check that your chosen router or access point mode supports the wired setup you want.

Wireless mesh

Choose this if: running a cable isn’t practical and you have a spot where the node can still get a good wireless connection to the network.

Bear in mind: adding another node won’t automatically fix a weak connection to the previous one. Some systems share a radio band between devices and backhaul, as NETGEAR explains.

Powerline backhaul

Choose this if: walls are interfering with the wireless connection, running a network cable isn’t feasible and your sockets can provide a reliable connection over your electrical wiring.

Bear in mind: performance depends on your electrical setup. TP-Link describes powerline backhaul for compatible PX50 nodes and recommends plugging them directly into a wall socket.

What to consider What should you check? Who should pay closer attention?
Coverage to the hobby room Compare a cable, the position of a wireless node and suitable powerline mesh. Test the connection in the room. I mainly want a usable connection in the hobby room, even if walls get in the way. Around 36% of consumers prioritise coverage to this room.
Simultaneous video calls Test with the calling apps you use and several active devices. Also check your internet connection’s upload and download speeds. If someone else is on a call elsewhere, I want my call in the hobby room to remain usable. Around 29% of consumers prioritise stability during simultaneous calls.
Connecting to your existing router Check the router or access point mode, compatibility with your existing mesh network and the number of available ports you’ll need. I want to extend coverage without replacing my existing network unnecessarily. Around 21% of consumers prioritise easy expansion.
Purchase and support Compare the number of units in the pack, connection options and information about updates and the warranty for the exact model. I want to know in advance which kit and support are right for my needs. Around 14% of consumers prioritise purchase and after-sales support.

Things to watch out for when buying

  • Buying another wireless node without checking the connection between them

    The node at the back of the house also needs to be able to send traffic to the main network. A weak connection to the previous node will still be a bottleneck.

    Check the connection between the nodes and compare cabling and placement before adding more nodes.

  • Assuming the stated Wi-Fi speed is what you’ll get in the hobby room

    A radio specification doesn’t tell you how well the signal travels through your home or how much upload capacity your internet connection has.

    Test in the room while calls are taking place at the same time, and check the upload speed separately.

  • Assuming all powerline products work together as one mesh backhaul

    According to TP-Link, Deco PX50 powerline backhaul is designed for compatible PX50 nodes. Separate adapters or other Deco models mentioned here won’t automatically provide the same connection.

    Check the full model names and test the wall sockets you plan to use before relying on powerline.

Brands to consider

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 mesh system with Ethernet ports. According to TP-Link, the Deco PX50 adds G.hn powerline as a possible connection between compatible PX50 nodes.

  • The X50 product specification lists three gigabit ports per unit.
  • The PX50 powerline connection depends on your electrical setup and won’t work with just any powerline adapters. These are model features, not measurements of call quality.

ASUS

The ZenWiFi XD5 is a mesh option to consider if you can use Ethernet between the hubs.

  • ASUS lists Ethernet backhaul and the option to use one network name or separate names for each frequency band.
  • According to ASUS, regional restrictions may apply to 160 MHz on the 5GHz band. Wi-Fi 6 features require compatible devices. A stated radio speed isn’t a measurement of performance in your hobby room.

FRITZ!

A FRITZ!Repeater, including the 3000 AX, is worth considering if you want to extend an existing FRITZ!Box network. A LAN connection to the back of the house is another possible setup.

  • In the compatible FRITZ!Box mesh setup described, the repeater adopts the settings, according to FRITZ!.
  • The same mesh integration isn’t guaranteed with a router from another brand, so check your router and configuration.

NETGEAR

Orbi mesh is an option to compare if wireless backhaul and the Ethernet options included with your chosen kit are important to you.

  • NETGEAR describes Ethernet backhaul as an alternative to a shared wireless connection between mesh nodes.
  • NETGEAR’s explanation isn’t an independent performance test and shouldn’t be taken as a specification for every Orbi kit.

Mesh products to consider

These Joybuy products are mesh kits for home use. Check the backhaul options, connections and number of units included in each version to see what suits your home.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

Suited to anyone looking for a two-node mesh kit with wired or wireless backhaul options.

Tri-band Wi-Fi 7 (802.11be); the product description lists multiple WAN/LAN ports per unit.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack), white

ASUS ZenWiFi BT8 (2-pack), white

A two-unit mesh kit for anyone comparing the listed tri-band Wi-Fi 7 version.

Tri-band; 2.4GHz, 5GHz and 6GHz bands; Wi-Fi 7 (802.11be). The product description lists AiMesh integration with other ASUS routers.

View at Joybuy
ASUS ZenWiFi BD4, dual-band, Wi-Fi 7, white, 2-pack

ASUS ZenWiFi BD4, dual-band, Wi-Fi 7, white, 2-pack

Suited to anyone looking for a mesh kit with wired backhaul as a connection option.

Dual-band (2.4GHz / 5GHz); Wi-Fi 7 (802.11be); the product description lists Ethernet ports and wired backhaul.

View at Joybuy
TP-Link Deco M4, 3-pack, dual-band, Wi-Fi 5

TP-Link Deco M4, 3-pack, Wi-Fi 5

A three-station kit for anyone looking to place several mesh nodes around the house.

Dual-band (2.4GHz / 5GHz); Wi-Fi 5 (802.11ac); the product description lists three stations that work together.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band, Wi-Fi 6

TP-Link Deco X50, 3-pack, Wi-Fi 6

Suited to anyone looking for three mesh nodes and wanting to compare Ethernet backhaul as an option.

Dual-band (2.4GHz / 5GHz); Wi-Fi 6 (802.11ax); three gigabit ports per unit according to the product description.

View at Joybuy

Frequently asked questions

Where should you place a wireless mesh node for a back room?

Don’t put it only where the Wi-Fi is already poor: the mesh node still needs a wireless connection to the network. Check the connection between the nodes, then test where you make calls. If you have a network cable available, you could consider Ethernet backhaul with a compatible system.

Is the stated Wi-Fi speed enough to guarantee two simultaneous video calls?

No. A stated radio speed doesn’t show how the connection performs in your rooms. Test your internet connection and the Wi-Fi in both locations. Video call requirements also depend on the app and call settings.

Can you plug a Deco PX50 into an extension lead and use it with existing powerline adapters?

TP-Link recommends plugging the PX50 directly into a wall socket, as filters in some extension leads can interfere with the signal. The manufacturer describes powerline backhaul for compatible PX50 nodes, not as a connection to any standalone adapters or other Deco models mentioned here.

Does the manufacturer’s warranty cover everything when you buy in the Netherlands?

No. Your statutory guarantee rights are separate from any retailer’s or manufacturer’s warranty. ACM ConsuWijzer explains that the retailer is responsible for offering a suitable solution if a product doesn’t do what you could reasonably expect when used normally. In the Netherlands, there’s no fixed statutory guarantee period that applies equally to every device.

Which product regulation applies to a mesh Wi-Fi system sold in the Netherlands?

Radio equipment must meet the applicable European requirements. If the product complies, the manufacturer affixes the CE marking. The Dutch Authority for Digital Infrastructure explains this requirement for radio equipment. Check the exact version you intend to buy: information about a different product listing doesn’t automatically confirm that this particular offer complies.